................................................................................................................................................................
By Jennifer Chait
Safety Expert
Construction sites can be a great place
to work but the speed in which events happen mixed with the sum of possible
safety hazards make heavy equipment construction safety a top priority.
The Main
Dangers of Construction Equipment
Often the safety of actual equipment is
intertwined with the safety of the construction site itself.
It's hard to separate the two variables
because unsafe equipment equals an unsafe site and site hazards can affect the
safety of equipment.
With this in mind, the Occupational
Safety & Health Administration (OSHA) cites the following as the top six hazards associated with construction sites:
1. Falls: This item
always makes the top of the list for construction site hazards.
Falls from equipment, scaffolding, and
other high places are dangerous and far too common.
All construction sites are required to
provide basic fall safety precautions and standards.
2. Stairways and
ladders: This
hazard is highly related to the fall category but you can review safety specific to stairways and ladders at
OSHA.
3. Scaffolding: This also
causes falls and if put together improperly can cause injuries and death.
Often people think about heavy
construction equipment safety with respect to equipment that moves but
standstill equipment can be just as dangerous when not used properly.
4. Electrical: These safety
issues relate to anything powered by electricity or that could be affected
negatively by electricity.
Heavy equipment that can shock you,
fires, explosions, and electrocution are all present hazards at almost any
construction site and precautions
and safety standards should be followed religiously.
This is one of those hazards that can
actually start off a chain reaction of negative events which makes electrical
safety even more important.
5. Trenching and
excavation: If
this is your job at a construction site, than you hold one of the most
dangerous positions possible to construction work.
Excavation alone account for one
percent of all work related deaths (most jobs don't even come close to
one percent).
Cave-ins, asphyxiation due to lack of
oxygen, collapsing walls, electrocution, explosions, deep water drowning,
unstable soil, and more all play a part in the high death rate of workers.
Luckily OSHA has a great e-tool designed for trenching and excavation
safety.
If you're a construction worker on a
site with heavy trenching and excavating reading this tool could save your
life.
The
Sixth Top Hazard at Construction Sites
Motor vehicle safety in relation to
highway work zones is the sixth top hazard and it's a huge issue and often
related directly to heavy moving equipment thus it really needs it's own
section.
Heavy construction equipment safety is
important on many levels.
This is another issue, like electrical
issues that can hurt many people at once.
If even one mistake is made with heavy
equipment it can start a chain reaction of negative consequences; both to the
site itself and more importantly to worker health and safety.
Workers plus heavy moving equipment
plus a site with few safety standards can be deadly.
Many workers each year are crushed by
falling equipment, struck by swinging backhoes, run over, or pinned between
vehicles and site walls or other equipment (to name a few).
Construction equipment is so large
sometimes that the potential for crushing more than one worker in a topple over
is great.
Heavy
Construction Equipment Safety
OSHA offers some ideas and tips for
staying safe when working around, with, and inside of heavy construction
equipment.
· Make
sure equipment is in good working order each and every day and
before every single operation.
· Use
the buddy system. This mean if you have a blind spot; and large machinery often
does, than you need one or more buddies carefully directing you where to go
when backing up a large piece of equipment.
Technically an ultra safety move would
be to also install a loud reverse alarm.
· Triple
check that all individuals and co-workers are clear out of the area before
dumping a load of materials or other machinery off of a piece of heavy
equipment.
· Never
exceed what a machine can carry according to the manual -- can you even find
the manual for your site equipment? If not, you should and read it through.
· All
workers should wear bright protective clothing and signs that are highly
visible should be set up in a way to discourage non-workers from entering a
site. It's easy to find great free caution signs and protective
clothing online.
· Never
forget one simple rule: parking breaks. Easy to operate and can
save lives.
Jennifer
Chait
is a full-time freelance writer and professional blogger. She was trained in
Nursing and Midwifery in college until she decided to write full time at home
to give her more time with her family. In her free-time she enjoys a killer
game of Frisbee with her adorable son and sleeping.
Safety
Expert
Jennifer
Chait is one of 'those' people obsessed with safety. From ergonomic furniture
to choking hazards to building the perfect first aid kit, she loves it all. She
is certified in various OSHA courses and adult, infant, and child CPR and first
aid. Jennifer really enjoys having an outlet to write about safety; her friends
enjoy this too, since it takes her safety speeches away from them and puts them
somewhere more useful.
LoveToKnow.com is dedicated to
providing high quality, useful information on a variety of topics to internet
users. Finding quality advice on the web can be overwhelming. We strive to
offer the most useful information and advice on topics that are most important
to our readers.
Our content is in a convenient, easy-to-use format, perfect for skimming a few facts or diving deeper into the subject.
Our content is in a convenient, easy-to-use format, perfect for skimming a few facts or diving deeper into the subject.
No comments:
Post a Comment