Showing posts with label Erosion. Show all posts
Showing posts with label Erosion. Show all posts

Tuesday, March 23, 2021

WEATHERING AND EROSION - Rock that is close to the land surface is subject to physical and chemical modification by a number of different weathering processes. These processes generally start with water percolating down into joints formed by stress release as the rock comes close to the surface, and are most intense at the surface and in the soil profile. Weathering is the breakdown and alteration of bedrock by mechanical and chemical processes that create a regolith (layer of loose material), which is then available for transport away from the site. Physical weathering are processes that break the solid rock into pieces and may separate the different minerals without involving any chemical reactions. Water entering cracks in rock expands upon freezing, forcing the cracks to widen; this process is also known as frost shattering and it is extremely effective in areas that regularly fluctuate around 0 degree Celsius, such as high mountains in temperate climates and in polar regions. Seawater or other water containing dissolved salts may also penetrate into cracks, especially in coastal areas. Upon evaporation of the water, salt crystals form and their growth generates localised, but significant, forces that can further open cracks in the rock. Changes in temperature probably play a role in the physical breakdown of rock. Rapid changes in temperature occur in some desert areas where the temperature can fluctuate by several tens of degrees Celsius between day and night.

................................................................................................................................................................................................................................................................................................................................................................................

Weathering and erosion

By OK


 

Weathering processes

Rock that is close to the land surface is subject to physical and chemical modification by a number of different weathering processes.

These processes generally start with water percolating down into joints formed by stress release as the rock comes close to the surface, and are most intense at the surface and in the soil profile.

Weathering is the breakdown and alteration of bedrock by mechanical and chemical processes that create a regolith (layer of loose material), which is then available for transport away from the site.

Physical weathering

These are processes that break the solid rock into pieces and may separate the different minerals without involving any chemical reactions. The most important agents in this process are as follows.

Freeze-thaw action

Water entering cracks in rock expands upon freezing, forcing the cracks to widen; this process is also known as frost shattering and it is extremely effective in areas that regularly fluctuate around 0 degree Celsius, such as high mountains in temperate climates and in polar regions.

Salt growth

Seawater or other water containing dissolved salts may also penetrate into cracks, especially in coastal areas.

Upon evaporation of the water, salt crystals form and their growth generates localised, but significant, forces that can further open cracks in the rock.

Temperature changes

Changes in temperature probably play a role in the physical breakdown of rock.

Rapid changes in temperature occur in some desert areas where the temperature can fluctuate by several tens of degrees Celsius between day and night; if different minerals expand and contract at differentrates, the internal forces created could cause the rock to split.

This process is referred to as exfoliation, as thin layers break off the surface of the rock.

Chemical weathering

These processes involve changes to the minerals that make up a rock. The reactions that can take place are as follows.

Solution

Most rock-forming silicate minerals have very low solubility in pure water at the temperatures at the Earth’s surface and so most rock types are not susceptible to rapid solution.

It is only under conditions of strongly alkaline waters that silica becomes moderately soluble.

Carbonate minerals are moderately soluble, especially if the groundwater (water passing through bedrock close to the surface) is acidic.

Most soluble are evaporite minerals such as halite (sodium chloride) and gypsum, which locally can form an important component of sedimentary bedrock.

Hydrolysis

Hydrolysis reactions depend upon the dissociation of H2O into H+ and OH ions that occurs when there is an acidifying agent present.

Natural acids that are important in promoting hydrolysis include carbonic acid (formed by the solution of carbon dioxide in water) and humic acids, a range of acids formed by the bacterial breakdown of organic matter in soils.

Many silicates undergo hydrolysis reactions, for example the formation of kaolinite (a clay mineral) from orthoclase (a feldspar) by reaction with water.

Oxidation

The most widespread evidence of oxidation is the formation of iron oxides and hydroxides from minerals containing iron.

The distinctive red-orange rust colour of ferric iron oxides may be seen in many rocks exposed at the surface, even though the amount of iron present may be very small.

The products of weathering

Material produced by weathering and erosion of material exposed on continental landmasses is referred to as terrigenous (meaning derived from land).

Weathered material on the surface is an important component of the regolith that occurs on top of the bedrock in most places.

Terrigenous clastic detritus comprises minerals weathered out of bedrock, lithic fragments and new minerals formed by weathering processes.

Rock-forming minerals can be categorised in terms of their stability in the surface environment.

Stable minerals such as quartz are relatively unaffected by chemical weathering processes and physical weathering simply separates the quartz crystals from each other and from other minerals in the rock.

Micas and orthoclase feldspars are relatively resistant to these processes, whereas plagioclase feldspars, amphiboles, pyroxenes and olivines all react very readily under surface conditions and are only rarely carried away from the site of weathering in an unaltered state.

The most important products of the chemical weathering of silicates are clay minerals.

A wide range of clay minerals form as a result of the breakdown of different bedrock minerals under different chemical conditions; the most common are kaolinite, illite, chlorite and montmorillonite.

Oxides of aluminium (bauxite) and iron (mainly haematite) also form under conditions of extreme chemical weathering.

In places where chemical weathering is subdued, lithic fragments may form an important component of the detritus generated by physical processes.

The nature of these fragments will directly reflect the bedrock type and can include any lithology found at the Earth’s surface.

Some lithologies do not last very long as fragments: rocks made of evaporite minerals are readily dissolved and other lithologies are very fragile making them susceptible to break-up.

Detritus composed of basaltic lithic fragments can form around volcanoes and broken up limestone can make up an important clastic component of some shallow marine environments.

Soil development

Soil formation is an important stage in the transformation of bedrock and regolith into detritus available for transport and deposition.

In situ (in place) physical and chemical weathering of bedrock creates a soil that may be further modified by biogenic processes.

The roots of plants penetrating into bedrock can enhance break-up of the underlying rock and the accumulation of vegetation (humus) leads to a change in the chemistry of the surface waters as humic acids form.

Soil profiles become thicker through time as bedrock is broken up and organic matter accumulates, but a soil is also subject to erosion.

Movement under gravity and by the action of flowing water may remove part or all of a soil profile.

These erosion processes may be acute on slopes and important on flatter-lying ground where gullying may occur. The soil becomes disaggregated and contributes detritus to rivers.

In temperate and humid tropical environments most of the sediment carried in rivers is likely to have been part of a soil profile at some stage.

Continental depositional environments are also sites of soil formation, especially the floodplains of rivers. These soils may become buried by overlying layers of sediment and are preserved in the stratigraphic record as fossil soils.

Erosion and transport

Weathering is the in situ breakdown of bedrock and erosion is the removal of regolith material.

Loose material on the land surface may be transported downslope under gravity, it may be washed by water, blown away by wind, scoured by ice or moved by a combination of these processes.

Falls, slides and slumps are responsible for moving vast quantities of material downslope in mountain areas but they do not move detritus very far, only down to the floor of the valleys.

The transport of detritus over greater distances normally involves water, although ice and wind also play an important role in some environments.

Erosion and transport under gravity

On steep slopes in mountainous areas and along cliffs movements downslope under gravity are commonly the first stages in the erosion and transport of weathered material.

Downslope movement

There is a spectrum of processes of movement of material downslope. A landslide is a coherent mass of bedrock that has moved downslope without significantly breaking up in the process.

Many thousands of cubic metres of rock can be translated downhill retaining the internal structure and stratigraphy of the unit.

If the rock breaks up during its movement it is a rock fall, which accumulates as a chaotic mass of material at the base of the slope.

These movements of material under gravity alone may be triggered by an earthquake, by undercutting at the base of the slope, or by other mechanisms, such as water logging of a potentially unstable slope by a heavy rainfall.

Movement downslope may also occur when the regolith is lubricated by water and there is soil creep.

This is a much slower process than falls and slides and may not be perceptible unless a hillside is monitored over a number of years.

A process that may be considered to be intermediate between creep movement and slides is slumping.

Slumps are instantaneous events like slides but the material is plastic due to saturation by water and it deforms during movement downslope.

With sufficient water a slump may break up into a debris flow.

Scree and talus cones

In mountain areas weathered detritus falls as grains, pebbles and boulders down mountainsides to accumulate near the bottom of the slope.

These accumulations of scree are often reworked by water, ice and wind but sometimes remain preserved as talus cones, i.e. concentrations of debris at the base of gullies.

These deposits are characteristically made up of angular to very angular clasts because transport distances are very short, typically only a few hundred metres, so there is little opportunity for the edges of the clasts to become abraded.

A small amount of sorting and stratification may result from percolating water flushing smaller particles down through the pile of sediment, but generally scree deposits are poorly sorted and crudely stratified.

Bedding is therefore difficult to see in talus deposits but where it can be seen the layers are close to the angle of rest of loose aggregate material.

Talus deposits are distinct from alluvial fans because water does not play a role in the transport and deposition.

Erosion and transport by water

Erosion by water on hillsides is initially as a sheet wash, i.e. unconfined surface run-off down a slope following rain.

This overground flow may pick up loose debris from the surface and erode the regolith.

The quantity of water involved and its carrying capacity depends not only on the amount of rainfall but also the characteristics of the surface: water runs faster down a steep slope, vegetation tends to reduce flow and trap debris and a porous substrate results in infiltration of the surface water.

Surface run-off is therefore most effective at carrying detritus during flash-flood events on steep, impermeable slopes in sparsely vegetated arid regions.

Vegetation cover and thicker, permeable soils in temperate and tropical climates tend to reduce the transport capacity of surface run-off.

Sheet wash becomes concentrated into rills and gullies that confine the flow and as these gullies coalesce into channels the headwaters of streams and rivers are established.

Rivers erode into regolith and bedrock as the turbulent flow scours at the floor and margins of the channel, weakening them until pieces fall off into the stream.

Flow over soluble bedrock such as limestone also gradually removes material in solution.

Eroded material may be carried away in the stream flow as bedload, in suspension, or in solution; the confluence of streams forms larger rivers, which may feed alluvial fans, fluvial environments of deposition, lakes or seas.

Erosion and transport by wind

Winds are the result of atmospheric pressure differences that are partly due to global temperature distributions, and also local variations in pressure due to the temperature of water masses that move with ocean currents, heat absorbed by land masses and cold air over high glaciated mountain regions.

A complex and shifting pattern of regions of high pressure (anticyclones) and low pressure (depressions) regions generates winds all over the surface of the Earth.

Winds experienced at the present day range up to storm force winds of 100 km to hurricanes that are twice that velocity.

Winds are capable of picking up loose clay, silt and sand-sized debris from the land surface.

Wind erosion is most effective where the land surface is not bound by plants and hence it is prevalent where vegetation is sparse, in cold regions, such as near the poles and in high mountains, and dry deserts.

Dry floodplains of rivers, sandy beaches and exposed sand banks in rivers in any climate setting may also be susceptible to wind erosion.

Eroded fine material (up to sand grade) can be carried over distances of hundreds or thousands of kilometres by the wind. The size of material carried is related to the strength (velocity) of the air current.

Erosion and transport by ice

Glaciers in temperate mountain regions make a very significant contribution to the erosion and transport of bedrock and regolith.

The rate of erosion is between two and ten times greater in glaciated mountain areas than in comparable unglaciated regions.

In contrast, glaciers and ice sheets in polar regions tend to inhibit the erosion of material because the ice is frozen to the bedrock: movement of the ice in these polar ‘cold-based’ glaciers is mainly by shearing within the ice body.

In temperate (warm based) glaciers, erosion of the bedrock by ice occurs by two processes, abrasion and plucking.

Glacial abrasion occurs by the frictional action of blocks of material embedded in the ice (‘tools’) on the bedrock.

These tools cut grooves, glacial striae, in the bedrock a few millimetres deep and elongate parallel to the direction of ice movement: striae can hence be used to determine the pathways of ice flow long after the ice has melted.

The scouring process creates rock flour, clay and silt-sized debris that is incorporated into the ice.

Glacial plucking is most common where a glacier flows over an obstacle. On the up-flow side of the obstacle abrasion occurs but on the down-flow side the ice dislodges blocks that range from centimetres to metres across.

The blocks plucked by the ice and subsequently incorporated into the glacier are often loosened by subglacial freeze-thaw action.

The landforms created by this combination of glacial abrasion and plucking are called roche moutone'e, apparently because they resemble sheep from a (very) great distance.

Learning Geology is a science website and a community of Earth Scientists that shares geology lessons and host live virtual field tours from all around the world.

With our postings we aim to reach to our fellows with broader public regardless of the boundaries. The postings are done in the great interests of the fellow to learn more and more. The reason for writing is to provide an environment where we can give the best knowledge present just to be shared in the field of Earth and space sciences that we present here. Nobody judge anyone so feel free to feedback and let us know what great ideas you have, be a contributor.  

http://geologylearn.blogspot.com/2015/08/weathering-and-erosion.html


You might also like:


Weathering

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/11/weathering-mechanical-weathering.html

.............................................................................................................................................................................................................................................................................................

Chemical Weathering

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/04/chemical-weathering-chemical-weathering.html

...........................................................................................................................................................................

Friday, January 1, 2021

CULVERTS TYPES, DESIGN, INSTALLATION AND MATERIALS - An opening through an embankment for the conveyance of water by means of pipe or an enclosed channel.Or, It is a transverse and totally enclosed drain under a road or railway. Pipe culverts are made of smooth steel, corrugated metal, or concrete material. Their primary purpose is to convey water under roads, although a variety of wildlife use them as passageways. Pipe culverts typically range from 1- 6 feet in diameter and are the least expensive type of culvert. Round culverts are best suited to medium and high stream banks. Pipe-arch culverts provide low clearance, openings suitable for large waterways, and are more aesthetic. They may also provide a greater hydraulic advantage to fishes at low flows and require less road fill. Box culverts are used to transmit water during brief runoff periods. These are usually used by wildlife because they remain dry most of the year. They can have an artificial floor such as concrete. Box culverts generally provide more room for wildlife passage than large pipe culverts. Box culverts are usually made up of Reinforced Concrete (RCC). A pipe arch culvert is a round culvert reshaped to allow a lower profile while maintaining flow characteristics. It is good for installations with shallow cover. Materials used for arch culverts are RCC, Corrugated Metal or Stone Masonry. Ideally, the axis of a culvert should coincide with that of the natural streamed and the structure should be straight and short.

 



Culverts Types, Design, Installation and Materials

By: Haseeb Jamal

 

Definition

An opening through an embankment for the conveyance of water by means of pipe or an enclosed channel.

Or. 

It is a transverse and totally enclosed drain under a road or railway.

Types of Culverts

1.        Pipe Single or Multiple

2.        Pipe Arch Single or Multiple

3.        Box Culvert Single or Multiple

4.        Bridge Culvert

5.        Arch Culvert

Pipe culverts are made of smooth steel, corrugated metal, or concrete material. Their primary purpose is to convey water under roads, although a variety of wildlife use them as passageways.

Pipe culverts typically range from 1- 6 feet in diameter and are the least expensive type of culvert. Round culverts are best suited to medium and high stream banks.

Pipe Arch Single or Multiple

Pipe-arch culverts provide low clearance, openings suitable for large waterways, and are more aesthetic. They may also provide a greater hydraulic advantage to fishes at low flows and require less road fill.

Box Culvert Single or Multiple

Box culverts are used to transmit water during brief runoff periods. These are usually used by wildlife because they remain dry most of the year.

They can have an artificial floor such as concrete.

Box culverts generally provide more room for wildlife passage than large pipe culverts. Box culverts are usually made up of Reinforced Concrete (RCC)

Arch Culvert

A pipe arch culvert is a round culvert reshaped to allow a lower profile while maintaining flow characteristics. It is good for installations with shallow cover.

Materials used for arch culverts are RCC, Corrugated Metal or Stone Masonry.

Design of Reinforced Concrete Culverts

Location

Ideally, the axis of a culvert should coincide with that of the natural streamed and the structure should be straight and short.

This may require modification of the culvert alignment and grade.

Often it is more practical to construct the culvert at right angles to the roadway.

However, the cost of any change in stream channel location required to accomplish this should be balanced against the cost of a skewed alignment of the culvert, and changes in channel hydraulics should be considered.

Grade and camber

The culvert invert gradient should be the same as the natural streambed to minimize erosion and silting problems.

Foundation settlement should be countered by cambering the culvert to ensure positive drainage.

Entrance and outlet conditions

It is often necessary to enlarge the natural channel a considerable distance downstream of the culvert to prevent backwater from entering the culvert.

Also, enlargement of the culvert entrance may be required to prevent pending above the culvert entrance.

The entrance and outlet conditions of the culvert structure directly impact its hydraulic capacity.

Rounding or beveling the entrance corners increases the hydraulic capacity, especially for short culverts of small cross section.

Scour problems can occur when abrupt changes are made to the streamed flow line at the entrance or outlet of the culvert.

Materials used

Foundation material

Materials to be used for the culvert pipe foundation should be indicated on the drawings. Refer to the geotechnical foundation report for the project.

Bedding materials 

Bedding class and materials for culverts should be indicated on the drawings.

When designing the bedding for a box culvert, assume the bedding material to be slightly yielding, and that a uniform support pressure develops under the box section.

Purpose and Use

Culverts are used in roads, bridges, and berm construction to prevent flooding and washing out of roads.

They also minimize erosion, build-up of standing water, and provide pathways for run-off.

Haseeb Jamal

I am a Civil Engineer, graduated from University of Engineering and Technology, Peshawar, Pakistan in 2010. I also have a PG-Diploma in Disaster Management and MS in Urban Infrastructure Engineering (In Progress). My expertise include civil related softwares like AutoCAD, SAP2000, MS Project, Primavera, MS Office and GIS. My technical skills include project management, monitoring and evaluation, structural assessment, disaster risk management, Quantity survey, land survey, material testing, site management and technical writing. I am trained in writing project progress reports as well as proposals and concept papers. I have also received advanced training on surveying, proposal writing, Monitoring and Evaluation of projects as well as organizations.

I have worked as Project Engineer at National Research and Development Foundation, Peshawar and CENCON Associates. I also worked with Spectra Engineering Solutions as Senior Civil Engineer in monitoring of World Bank and UNDP funded projects all over Khyber Pakhtunkhwa and FATA. Currently, I am working as Deputy Manager Development at NayaTel, Peshawar.

https://www.aboutcivil.org/culvert-definition-types-culvert-materials.html

 




https://www.aboutcivil.org/culvert-definition-types-culvert-materials.html





https://www.google.com/search?sxsrf=ALeKk03W7p6VwprOX45yhXm2WQ4ha48l5g:1609573853878&source=univ&tbm=isch&q=Culverts+Types+images&sa=X&ved=2ahUKEwjd8LLu4fztAhWU-mEKHUV5C6AQjJkEegQIAxAB&biw=1517&bih=724


Tuesday, December 22, 2020

SEDIMENT SUPPLY AND THE IMPORTANCE OF BIG RIVERS - Sediment supply is controlled primarily by tectonics and climate. In geologically simple areas, where the basin is fed directly from the adjacent margins and source-area uplift is related to basin subsidence, supply considerations are likely to be directly correlated to basin subsidence and eustasy as the major controls of basin architecture. Such is the case where subsidence is yoked to peripheral upwarps, or in proximal regions of foreland basins adjacent to fold-thrust belts. However, where the basin is supplied by long-distance fluvial transportation, complications are likely to arise. Where the rate of sediment supply is high, it may overwhelm other influences to become a dominant control on sequence architecture. Many sedimentary basins were filled by river systems whose drainage area has been subsequently remodeled by tectonism, and it may take considerable geological investigation to reconstruct their possible past positions. Dynamic topographic processes have generated regional uplifts and continental tilts that have resulted in deep erosion and large-scale continental fluxes of detrital sediment. Much of the detritus derived by uplift and erosion of the Grenville orogen of eastern North America during the late Precambrian may have ended up contributing to the thick Neoproterozoic sedimentary wedges on the western continental margin.

....................................................................................................................................................................................................................................................................................................................................................................................

 Sediment Supply and the Importance of Big Rivers

By OK 

Learning Geology

 

Sediment supply is controlled primarily by tectonics and climate.

In geologically simple areas, where the basin is fed directly from the adjacent margins and source-area uplift is related to basin subsidence, supply considerations are likely to be directly correlated to basin subsidence and eustasy as the major controls of basin architecture.

Such is the case where subsidence is yoked to peripheral upwarps, or in proximal regions of foreland basins adjacent to fold-thrust belts.

However, where the basin is supplied by long-distance fluvial transportation, complications are likely to arise.

Where the rate of sediment supply is high, it may overwhelm other influences to become a dominant control on sequence architecture.

Many sedimentary basins were filled by river systems whose drainage area has been subsequently remodeled by tectonism, and it may take considerable geological investigation to reconstruct their possible past positions.

For example, stratigraphic successions may occur that cannot be related to the evolution of adjacent orogens.

In North America, dynamic topographic processes have generated regional uplifts and continental tilts that have resulted in deep erosion and large-scale continental fluxes of detrital sediment.

For example, much of the detritus derived by uplift and erosion of the Grenville orogen of eastern North America during the late Precambrian may have ended up contributing to the thick Neoproterozoic sedimentary wedges on the western continental margin.

Detailed study of detrital zircons from sedimentary rocks of this age in the western Canadian Arctic indicated that 50% of them are of Grenville age.

A major west-flowing river system was established during the late Proterozoic which transported this detritus some 3,000 km across the continental interior.

Much of the thick accumulations of late Paleozoic and Mesozoic fluvial and eolian strata in the southwestern United States had been derived from Appalachian sources, and this was confirmed by the detrital-zircon.

Tertiary river system draining from the continental interior of North America into Hudson Bay, ultimately delivering sediment to the Labrador Shelf.

This has been supported by the studies of Cenozoic landforms and sediments.


Major river systems may cross major tectonic boundaries, feeding sediment of a petrographic type unrelated to the receiving basin, into the basin at a rate unconnected in any way with the subsidence history of the basin itself.

The modern Amazon river is a good example. It derives from the Andean Mountains, flows across and between, and is fed from several Precambrian shields, and debouches onto a major extensional continental margin.

From the point of view of sequence stratigraphy, the important point is that large sediment supplies delivered to a shoreline may overwhelm the stratigraphic effects of variations in sea level.

A region undergoing a relative or eustatic rise in sea level may still experience stratigraphic regression if large delta complexes are being built by major sediment-laden rivers.

Effects of upstream controls on the development of fluvial graded profiles, fluvial style and the development of nonmarine sequences downstream.

Upstream controls may also be significant in the case of deep-marine deposits.

Major episodes of submarine-fan sedimentation in the North Sea and Shetland-Faeroes basins correlate with pulses of Iceland plume activity, which caused magmatic underplating of the continental margin, and uplift, erosion, and enhanced sediment delivery to offshore sedimentary basins.

A significant example of this long-distance sedimentary control is the Cenozoic stratigraphic evolution of the Texas-Louisiana coast of the Gulf of Mexico.

This continental margin is fed with sediment by rivers that have occupied essentially the same position since the early Tertiary.

The rivers feed into the Gulf Coast from huge drainage basins occupying large areas of the North American Interior.

Progradation has extended the continental margin of the Gulf by up to 350 km.

This has taken place episodically in both time and space, developing a series of major clastic wedges, some hundreds of metres in thickness.

The major changes along strike of the thickness of these clastic wedges is also evidence against a control by passive sea-level change.

Highly suggestive are the correlations with the tectonic events of the North American Interior; for example, the timing of the Lower and Upper Wilcox Group wedges relative to the timing of the Laramide orogenic pulses along the Cordillera.

It seems likely that sediment supply, driven by source-area tectonism, is the major control on the location, timing and thickness of the Gulf Coast clastic wedges.

A secondary control is the nature of local tectonism on the continental margin itself, including growth faulting, evaporite diapirism and gravity sliding.

Variations in deep-marine sediment dispersal in the Gulf of Mexico show very similar patterns to the coastal and fluvial variations.

Large-scale submarine-fan systems are therefore dependent, also, on considerations of long-term sediment supply variation, which may be controlled by plate-margin tectonism, in-plane stress regime and dynamic topography.

In arc-related basins volcanic control of the sediment supply may overprint the effects of sea-level change.

Sediment supply and tectonic activity overprinted the eustatic effects and enhanced or lessened them.

If large supplies of clastics or uplift overcame the eustatic effects, deep marine sands were also deposited during highstand of sea level, whereas under conditions of low sediment input, thin-bedded turbidites were deposited even during lowstands of sea level.

Other examples of the tectonic control of major sedimentary units are provided by the basins within and adjacent to the Alpine and Himalayan orogens.

Sediments shed by the rising mountains drain into foreland basins, remnant ocean basins, strike-slip basins, and other internal basins.

But the sediment supply is controlled entirely by uplift and by the tectonic control of dispersal routes.

For example, the Oligocene Molasse of the Swiss proforeland basin was deposited by rivers flowing axially along the basin, and that these underwent reversal in transport directions as a result of changes in the configuration of the basin and the collision zone during orogenesis.

The shifting of dispersal routes through basins and fault valleys within the Himalayan orogen of central and southeast Asia.

Some of the major rivers in the area (Tsangpo, Salween, Mekong) are known to have entirely switched to different basins during the evolution of the orogen.

Much work remains to be done to relate the details of the stratigraphy in these various basins to the different controls of tectonic subsidence, tectonic control of sediment supply, and eustatic sea-level changes.

Learning Geology is a science website and a community of Earth Scientists that shares geology lessons and host live virtual field tours from all around the world.
With our postings we aim to reach to our fellows with broader public regardless of the boundaries. The postings are done in the great interests of the fellow to learn more and more. The reason for writing is to provide an environment where we can give the best knowledge present just to be shared in the field of Earth and space sciences that we present here. Nobody judge anyone so feel free to feedback and let us know what great ideas you have, be a contributor.  

http://geologylearn.blogspot.com/2015/07/sediment-supply-and-importance-of-big.html

 
























Monday, October 5, 2020

SOIL AGGREGATES - Poorly aggregated soils disintegrate easily when exposed to erosive forces. They tend to break down faster, leading to soil degradation. Poor stability can lead to pore spaces being filled in and can ultimately result in the formation of soil crusts. This can lead to reduced infiltration and gaseous exchange. Poorly aggregated soils can reduce crop productivity. Soil management often influences aggregate size, shape, and stability. The ground beneath your feet might seem like a uniform material, but it’s really a mixture of soil particles, organic matter, and other mineral/organic components. For a soil to be healthy, it must have good structure. Soil is made up of a combination of primary particles – sand, silt and clay. These particles can be bound together into what soil scientists call “aggregates.” Soil aggregates retained on a 4.75 mm sieve after wet sieving experiment. These aggregates are clumps of soil that range from the micro level (less than 0.25mm in diameter) to the macro level (greater than 0.25mm in diameter). Furthermore, they can resemble various shapes: granular, blocky, etc. These varied shapes allow for healthy soil to have pores spaces for air and water, needed for healthy plant growth. Aggregate formation is a complex process. Soil aggregates are formed through physical, chemical and biological activity below ground. They are even influenced by human factors, like tilling, walking on the surface, or even how you fertilize your garden.

...................................................................................................................................................................................................................................................................................................................................................................................................

Soil  Aggregates

What are soil aggregates?

Soil is made up of a combination of primary particles – sand, silt and clay.These particles can be bound together into what soil scientists call “aggregates.”

.

Poorly aggregated soils disintegrate easily when exposed to erosive forces. They tend to break down faster, leading to soil degradation. Poor stability can lead to pore spaces being filled in and can ultimately result in the formation of soil crusts. This can lead to reduced infiltration and gaseous exchange. Poorly aggregated soils can reduce crop productivity. Soil management often influences aggregate size, shape, and stability.

Soil Science Society of America

by Nall I. Moonilall, Ohio State University


 

The ground beneath your feet might seem like a uniform material, but it’s really a mixture of soil particles, organic matter, and other mineral/organic components.

For a soil to be healthy, it must have good structure.

Soil is made up of a combination of primary particles – sand, silt and clay.

Soil aggregates retained on a 4.75 mm sieve after wet sieving experiment.

These particles can be bound together into what soil scientists call “aggregates.”

These aggregates are clumps of soil that range from the micro level (less than 0.25mm in diameter) to the macro level (greater than 0.25mm in diameter).

Furthermore, they can resemble various shapes: granular, blocky, etc.

These varied shapes allow for healthy soil to have pores spaces for air and water, needed for healthy plant growth.

Aggregate formation is a complex process.

Soil aggregates are formed through physical, chemical and biological activity below ground.

They are even influenced by human factors, like tilling, walking on the surface, or even how you fertilize your garden.

Formation of aggregates begins with finer soil primary particles binding together.

You may know that clay particles have a negative charge.

And, the fertilizers you use include salts that have positively charged cations (things like potassium nitrate, etc.)

The positively charged cations allow the negatively charged clay particles to bind together creating “floccules.”

Soil crust formation on a soil exposed to simulated rainfall.  You can see

 the crust formation on the surface of the soil as well as how deep

 the crust extends. (This really is soil – not cement!)

The type and amount of clay minerals in the soil often plays an influential role in aggregation formation.

The second part of aggregate formation deals with cementation.

Here, the clay floccules and other soil particles are bonded together by some type of cementing agent. (Here we mean “binding” – not cement like in concrete!)

Examples of cementing agents include organic matter, and liming materials like calcium carbonate.

Even types of oxides, like iron and aluminum can help cement particles together.

In the case of organic matter, it is broken down by the soil microorganisms and soil fauna (earthworms, etc.)

When breakdown occurs, these organisms secrete organic compounds that are the “glue” that makes cementation occur.

Plant roots also play a role in aggregate formation by secreting organic compounds called root exudates.

These help bind soil together near the root zone. Fungal hyphae also contribute to aggregate formation by entangling and weaving around soil particles.

As you can see, aggregate formation is the result of many interactions and feedback loops occurring below ground.

Soil aggregates play a major role in soil structure formation and soil health.

In agriculture, the stability of aggregates is critical to how well an agroecosystem will function. The pore spaces in soil influence air and water storage, and gaseous exchange.

They create habitat for soil microorganisms, and allow for plant root development and penetration.

They also assist in nutrient cycling and transport.

Soils that have high aggregate stability are less susceptible to erosion.

Keep soil covered! Crop residues on the soil surface help
 to protect soil from erosive forces.

They hold their shape when exposed to disruptive forces, like water, and do not easily break apart.

Poorly aggregated soils disintegrate easily when exposed to erosive forces. They tend to break down faster, leading to soil degradation.

Poor stability can lead to pore spaces being filled in and can ultimately result in the formation of soil crusts.

This can lead to reduced infiltration and gaseous exchange. Poorly aggregated soils can reduce crop productivity.

Soil management often influences aggregate size, shape, and stability. Favorable practices that promote and maintain greater stability include:

·      Minimizing soil disturbance, like minimal tillage. This reduces aggregate destruction because they are not physically or mechanically broken apart;

·      Adding organic matter enhances aggregate strength and stability;

·      Keeping soil covered is essential to keeping soil intact. Vegetative cover on the soil reduces the impact of erosive forces;

·      Promoting a diverse cropping system. Systems that promote perennial plants or meadows have expansive rooting systems and require no tillage. Promoting this kind of diversity within a system will ensure that soil’s function is not reduced;

·      Managing for grazing. Grasses have strong root systems, but if animals graze too long, that can be disruptive to the forage system. There are many ways to graze animals and preserve or enhance soil stability; and,

·      Managing for pest control. The choice of plants and how they are managed (e.g., annual vs. perennial, cover crops, rotation) are highly influential.

To recap – soil aggregates are the building blocks that make up soil and their stability is extremely important in the long-term.

Soils that are well aggregated exhibit greater soil health, ensure greater agronomic productivity, are less susceptible to soil erosion, and can play a role in carbon sequestration.

Answered by Nall I. Moonilall, Ohio State University

To receive notices about future blogs, be sure to subscribe to Soils Matter by clicking on the Follow button on the upper right! Explore more on our webpage About Soils. There you will find more information about Soil Basics, Community Gardens, Green Infrastructure, Green Roofs, Soil Contaminants, materials for Teachers and more.

Soil Science Society of America (SSSA)

SSSA is the premier organization devoted to soil science. Our goal for “Soils Matter, Get the Scoop!” is to help preserve soil – a  valuable natural resource – by educating the public about sustainable practices.

Soils play a role in every part of our lives: the food we eat, the water we drink, the clothes we wear…even the beds we sleep in! Without soil we could not grow forests or food, or build houses. Soils even help clean the air we breathe.

Whether you are interested in soil science in general or have a specific question about your home garden, our blog will have something to interest you. Send us your questions, either by posting to the blog or emailing us at soils-matter@soils.org.

SSSA has more soils-related information for the general public on our main website, http://www.soils.org under the About Soils tab (https://www.soils.org/about-soils). Here, we have topics like Soil Basics, Soils in the City, Food, Climate, etc. We encourage you to explore all you can about soils – because Soils Sustain Life!

https://soilsmatter.wordpress.com/2019/07/15/what-are-soil-aggregates/