Showing posts with label Silica. Show all posts
Showing posts with label Silica. Show all posts

Tuesday, March 23, 2021

WEATHERING AND EROSION - Rock that is close to the land surface is subject to physical and chemical modification by a number of different weathering processes. These processes generally start with water percolating down into joints formed by stress release as the rock comes close to the surface, and are most intense at the surface and in the soil profile. Weathering is the breakdown and alteration of bedrock by mechanical and chemical processes that create a regolith (layer of loose material), which is then available for transport away from the site. Physical weathering are processes that break the solid rock into pieces and may separate the different minerals without involving any chemical reactions. Water entering cracks in rock expands upon freezing, forcing the cracks to widen; this process is also known as frost shattering and it is extremely effective in areas that regularly fluctuate around 0 degree Celsius, such as high mountains in temperate climates and in polar regions. Seawater or other water containing dissolved salts may also penetrate into cracks, especially in coastal areas. Upon evaporation of the water, salt crystals form and their growth generates localised, but significant, forces that can further open cracks in the rock. Changes in temperature probably play a role in the physical breakdown of rock. Rapid changes in temperature occur in some desert areas where the temperature can fluctuate by several tens of degrees Celsius between day and night.

................................................................................................................................................................................................................................................................................................................................................................................

Weathering and erosion

By OK


 

Weathering processes

Rock that is close to the land surface is subject to physical and chemical modification by a number of different weathering processes.

These processes generally start with water percolating down into joints formed by stress release as the rock comes close to the surface, and are most intense at the surface and in the soil profile.

Weathering is the breakdown and alteration of bedrock by mechanical and chemical processes that create a regolith (layer of loose material), which is then available for transport away from the site.

Physical weathering

These are processes that break the solid rock into pieces and may separate the different minerals without involving any chemical reactions. The most important agents in this process are as follows.

Freeze-thaw action

Water entering cracks in rock expands upon freezing, forcing the cracks to widen; this process is also known as frost shattering and it is extremely effective in areas that regularly fluctuate around 0 degree Celsius, such as high mountains in temperate climates and in polar regions.

Salt growth

Seawater or other water containing dissolved salts may also penetrate into cracks, especially in coastal areas.

Upon evaporation of the water, salt crystals form and their growth generates localised, but significant, forces that can further open cracks in the rock.

Temperature changes

Changes in temperature probably play a role in the physical breakdown of rock.

Rapid changes in temperature occur in some desert areas where the temperature can fluctuate by several tens of degrees Celsius between day and night; if different minerals expand and contract at differentrates, the internal forces created could cause the rock to split.

This process is referred to as exfoliation, as thin layers break off the surface of the rock.

Chemical weathering

These processes involve changes to the minerals that make up a rock. The reactions that can take place are as follows.

Solution

Most rock-forming silicate minerals have very low solubility in pure water at the temperatures at the Earth’s surface and so most rock types are not susceptible to rapid solution.

It is only under conditions of strongly alkaline waters that silica becomes moderately soluble.

Carbonate minerals are moderately soluble, especially if the groundwater (water passing through bedrock close to the surface) is acidic.

Most soluble are evaporite minerals such as halite (sodium chloride) and gypsum, which locally can form an important component of sedimentary bedrock.

Hydrolysis

Hydrolysis reactions depend upon the dissociation of H2O into H+ and OH ions that occurs when there is an acidifying agent present.

Natural acids that are important in promoting hydrolysis include carbonic acid (formed by the solution of carbon dioxide in water) and humic acids, a range of acids formed by the bacterial breakdown of organic matter in soils.

Many silicates undergo hydrolysis reactions, for example the formation of kaolinite (a clay mineral) from orthoclase (a feldspar) by reaction with water.

Oxidation

The most widespread evidence of oxidation is the formation of iron oxides and hydroxides from minerals containing iron.

The distinctive red-orange rust colour of ferric iron oxides may be seen in many rocks exposed at the surface, even though the amount of iron present may be very small.

The products of weathering

Material produced by weathering and erosion of material exposed on continental landmasses is referred to as terrigenous (meaning derived from land).

Weathered material on the surface is an important component of the regolith that occurs on top of the bedrock in most places.

Terrigenous clastic detritus comprises minerals weathered out of bedrock, lithic fragments and new minerals formed by weathering processes.

Rock-forming minerals can be categorised in terms of their stability in the surface environment.

Stable minerals such as quartz are relatively unaffected by chemical weathering processes and physical weathering simply separates the quartz crystals from each other and from other minerals in the rock.

Micas and orthoclase feldspars are relatively resistant to these processes, whereas plagioclase feldspars, amphiboles, pyroxenes and olivines all react very readily under surface conditions and are only rarely carried away from the site of weathering in an unaltered state.

The most important products of the chemical weathering of silicates are clay minerals.

A wide range of clay minerals form as a result of the breakdown of different bedrock minerals under different chemical conditions; the most common are kaolinite, illite, chlorite and montmorillonite.

Oxides of aluminium (bauxite) and iron (mainly haematite) also form under conditions of extreme chemical weathering.

In places where chemical weathering is subdued, lithic fragments may form an important component of the detritus generated by physical processes.

The nature of these fragments will directly reflect the bedrock type and can include any lithology found at the Earth’s surface.

Some lithologies do not last very long as fragments: rocks made of evaporite minerals are readily dissolved and other lithologies are very fragile making them susceptible to break-up.

Detritus composed of basaltic lithic fragments can form around volcanoes and broken up limestone can make up an important clastic component of some shallow marine environments.

Soil development

Soil formation is an important stage in the transformation of bedrock and regolith into detritus available for transport and deposition.

In situ (in place) physical and chemical weathering of bedrock creates a soil that may be further modified by biogenic processes.

The roots of plants penetrating into bedrock can enhance break-up of the underlying rock and the accumulation of vegetation (humus) leads to a change in the chemistry of the surface waters as humic acids form.

Soil profiles become thicker through time as bedrock is broken up and organic matter accumulates, but a soil is also subject to erosion.

Movement under gravity and by the action of flowing water may remove part or all of a soil profile.

These erosion processes may be acute on slopes and important on flatter-lying ground where gullying may occur. The soil becomes disaggregated and contributes detritus to rivers.

In temperate and humid tropical environments most of the sediment carried in rivers is likely to have been part of a soil profile at some stage.

Continental depositional environments are also sites of soil formation, especially the floodplains of rivers. These soils may become buried by overlying layers of sediment and are preserved in the stratigraphic record as fossil soils.

Erosion and transport

Weathering is the in situ breakdown of bedrock and erosion is the removal of regolith material.

Loose material on the land surface may be transported downslope under gravity, it may be washed by water, blown away by wind, scoured by ice or moved by a combination of these processes.

Falls, slides and slumps are responsible for moving vast quantities of material downslope in mountain areas but they do not move detritus very far, only down to the floor of the valleys.

The transport of detritus over greater distances normally involves water, although ice and wind also play an important role in some environments.

Erosion and transport under gravity

On steep slopes in mountainous areas and along cliffs movements downslope under gravity are commonly the first stages in the erosion and transport of weathered material.

Downslope movement

There is a spectrum of processes of movement of material downslope. A landslide is a coherent mass of bedrock that has moved downslope without significantly breaking up in the process.

Many thousands of cubic metres of rock can be translated downhill retaining the internal structure and stratigraphy of the unit.

If the rock breaks up during its movement it is a rock fall, which accumulates as a chaotic mass of material at the base of the slope.

These movements of material under gravity alone may be triggered by an earthquake, by undercutting at the base of the slope, or by other mechanisms, such as water logging of a potentially unstable slope by a heavy rainfall.

Movement downslope may also occur when the regolith is lubricated by water and there is soil creep.

This is a much slower process than falls and slides and may not be perceptible unless a hillside is monitored over a number of years.

A process that may be considered to be intermediate between creep movement and slides is slumping.

Slumps are instantaneous events like slides but the material is plastic due to saturation by water and it deforms during movement downslope.

With sufficient water a slump may break up into a debris flow.

Scree and talus cones

In mountain areas weathered detritus falls as grains, pebbles and boulders down mountainsides to accumulate near the bottom of the slope.

These accumulations of scree are often reworked by water, ice and wind but sometimes remain preserved as talus cones, i.e. concentrations of debris at the base of gullies.

These deposits are characteristically made up of angular to very angular clasts because transport distances are very short, typically only a few hundred metres, so there is little opportunity for the edges of the clasts to become abraded.

A small amount of sorting and stratification may result from percolating water flushing smaller particles down through the pile of sediment, but generally scree deposits are poorly sorted and crudely stratified.

Bedding is therefore difficult to see in talus deposits but where it can be seen the layers are close to the angle of rest of loose aggregate material.

Talus deposits are distinct from alluvial fans because water does not play a role in the transport and deposition.

Erosion and transport by water

Erosion by water on hillsides is initially as a sheet wash, i.e. unconfined surface run-off down a slope following rain.

This overground flow may pick up loose debris from the surface and erode the regolith.

The quantity of water involved and its carrying capacity depends not only on the amount of rainfall but also the characteristics of the surface: water runs faster down a steep slope, vegetation tends to reduce flow and trap debris and a porous substrate results in infiltration of the surface water.

Surface run-off is therefore most effective at carrying detritus during flash-flood events on steep, impermeable slopes in sparsely vegetated arid regions.

Vegetation cover and thicker, permeable soils in temperate and tropical climates tend to reduce the transport capacity of surface run-off.

Sheet wash becomes concentrated into rills and gullies that confine the flow and as these gullies coalesce into channels the headwaters of streams and rivers are established.

Rivers erode into regolith and bedrock as the turbulent flow scours at the floor and margins of the channel, weakening them until pieces fall off into the stream.

Flow over soluble bedrock such as limestone also gradually removes material in solution.

Eroded material may be carried away in the stream flow as bedload, in suspension, or in solution; the confluence of streams forms larger rivers, which may feed alluvial fans, fluvial environments of deposition, lakes or seas.

Erosion and transport by wind

Winds are the result of atmospheric pressure differences that are partly due to global temperature distributions, and also local variations in pressure due to the temperature of water masses that move with ocean currents, heat absorbed by land masses and cold air over high glaciated mountain regions.

A complex and shifting pattern of regions of high pressure (anticyclones) and low pressure (depressions) regions generates winds all over the surface of the Earth.

Winds experienced at the present day range up to storm force winds of 100 km to hurricanes that are twice that velocity.

Winds are capable of picking up loose clay, silt and sand-sized debris from the land surface.

Wind erosion is most effective where the land surface is not bound by plants and hence it is prevalent where vegetation is sparse, in cold regions, such as near the poles and in high mountains, and dry deserts.

Dry floodplains of rivers, sandy beaches and exposed sand banks in rivers in any climate setting may also be susceptible to wind erosion.

Eroded fine material (up to sand grade) can be carried over distances of hundreds or thousands of kilometres by the wind. The size of material carried is related to the strength (velocity) of the air current.

Erosion and transport by ice

Glaciers in temperate mountain regions make a very significant contribution to the erosion and transport of bedrock and regolith.

The rate of erosion is between two and ten times greater in glaciated mountain areas than in comparable unglaciated regions.

In contrast, glaciers and ice sheets in polar regions tend to inhibit the erosion of material because the ice is frozen to the bedrock: movement of the ice in these polar ‘cold-based’ glaciers is mainly by shearing within the ice body.

In temperate (warm based) glaciers, erosion of the bedrock by ice occurs by two processes, abrasion and plucking.

Glacial abrasion occurs by the frictional action of blocks of material embedded in the ice (‘tools’) on the bedrock.

These tools cut grooves, glacial striae, in the bedrock a few millimetres deep and elongate parallel to the direction of ice movement: striae can hence be used to determine the pathways of ice flow long after the ice has melted.

The scouring process creates rock flour, clay and silt-sized debris that is incorporated into the ice.

Glacial plucking is most common where a glacier flows over an obstacle. On the up-flow side of the obstacle abrasion occurs but on the down-flow side the ice dislodges blocks that range from centimetres to metres across.

The blocks plucked by the ice and subsequently incorporated into the glacier are often loosened by subglacial freeze-thaw action.

The landforms created by this combination of glacial abrasion and plucking are called roche moutone'e, apparently because they resemble sheep from a (very) great distance.

Learning Geology is a science website and a community of Earth Scientists that shares geology lessons and host live virtual field tours from all around the world.

With our postings we aim to reach to our fellows with broader public regardless of the boundaries. The postings are done in the great interests of the fellow to learn more and more. The reason for writing is to provide an environment where we can give the best knowledge present just to be shared in the field of Earth and space sciences that we present here. Nobody judge anyone so feel free to feedback and let us know what great ideas you have, be a contributor.  

http://geologylearn.blogspot.com/2015/08/weathering-and-erosion.html


You might also like:


Weathering

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/11/weathering-mechanical-weathering.html

.............................................................................................................................................................................................................................................................................................

Chemical Weathering

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/04/chemical-weathering-chemical-weathering.html

...........................................................................................................................................................................

Saturday, August 15, 2020

DIATOMACEOUS EARTH - DE is made from Diatomites, which are rough, porous fossilized mineral deposits formed near dried up water. The mineral is a result of dead single-celled algae called diatoms usually found in marine sediments. Diatoms account for ¼ of all photosynthesis on Earth. The size of each diatom is about the width of a human hair (0.5 mm). While some diatoms float by themselves, many diatoms group together and form suspended chains near the surface of water or attach themselves to rocks or plants under water. Diatoms have hard shells that resemble tiny pill-shaped glass houses made from silica. Silica is one of the hardest solids on earth and can be found in glass and concrete. Silica makes up 26% of the earth’s crust by weight. Diatomite deposits can be found all over the world, including notable extractions sites such as Neuohe. Diatomite deposits can be found all over the world. At the processing plant, the diatomites are crushed, dried, and milled to create food grade diatomaceous earth. Pool grade (also called filter grade) diatomaceous earth is treated with very high heat in a process called calcination, which changes the silicon dioxide into crystalline silica. Pool grade DE is toxic and should only be used in filtration. Food grade DE has less than 1% of crystalline silica and no more than 10mg/kg of arsenic or lead. One of the most common household uses for DE is pest control.

A family playing in their yard
...........................................................................................................................................................
TOP-9 Sugar Ant Killers: Best Baits and Insecticides in 2020Diatomaceous Earth
White Lake Diatomaceous Earth – Lone Star TackWhat is Diatomaceous Earth?
Safer® Brand


Discovered around 1836 by Peter Kasten in Germany, diatomaceous earth (DE) was originally used to make dynamite.
It now has dozens of uses including: metal polishes, toothpaste, pest control and water filters.
Diatomaceous Earth-1/2 Kilo - Hornsby Beekeeping SuppliesDE is made from Diatomites, which are rough, porous fossilized mineral deposits formed near dried up water.
The mineral is a result of dead single-celled algae called diatoms usually found in marine sediments.
Diatoms account for ¼ of all photosynthesis on Earth.
The size of each diatom is about the width of a human hair (0.5 mm).
While some diatoms float by themselves, many diatoms group together and form suspended chains near the surface of water or attach themselves to rocks or plants under water.
Diatoms have hard shells that resemble tiny pill-shaped glass houses made from silica.
Silica is one of the hardest solids on earth and can be found in glass and concrete. Silica makes up 26% of the earth’s crust by weight.
Diatomite deposits can be found all over the world, including notable extractions sites such as Neuohe.
TWO TYPES OF DE: POOL GRADE VS FOOD GRADE
The quality of DE depends mostly on two factors: 1) where it’s mined and
2) how it’s processed.
In the United States, according to the U.S. Geological Survey, DE is mined and processed in California, Nevada, Oregon and Washington.
However, diatomite deposits can be found all over the world.
At the processing plant, the diatomites are crushed, dried, and milled to create food grade diatomaceous earth.
Pool grade (also called filter grade) diatomaceous earth is treated with very high heat in a process called calcination, which changes the silicon dioxide into crystalline silica.
Pool grade DE is toxic and should only be used in filtration.
Food grade DE has less than 1% of crystalline silica and no more than 10mg/kg of arsenic or lead.
HOW DE WORKS TO KILL BUGS
One of the most common household uses for DE is pest control.
Safer® Brand Diatomaceous Earth is deadly to insects with an exoskeleton.
Woman working in a raised garden bedWhen a bug comes into contact with DE, it works under the insect’s shell and punctures the body with DE’s microscopic sharp edges, absorbs all the moisture, and causes the bug to die of dehydration.
Let’s take a look at how to use diatomaceous earth to kill bed bugs.
In the past few years, the U.S. has seen a rise in bed bug infestations because the bugs built up resistance to the toxic chemicals companies used to get rid of them.
Since diatomaceous earth kills bugs physically they can never become immune to it.
Homeowners can safely apply diatomaceous earth to their bed, couches, closets and whole house to eradicate bed bugs without harming their pets and kids.
Once bed bugs come into contact with DE it takes less than 48 hours to kill the insect.
Ways to use DE to Kill Bugs
Wear a dust mask when applying DE as it can irritate your nose and lungs.
Food Grade Diatomaceous Earth for Gardens and PlantsHowever, DE is safe once the dust has settled.
Diatomaceous earth must be dry in order to work. If using outside, reapply after it rains.
Leave bugs dead in the dust and feel good about using nature’s remedy.
Check out Safer® Brand’s diatomaceous earth products made from food grade diatomaceous earth.
Our products are OMRI Listed® and compliant for use in organic production.
Safer Diatomaceous Earth for Pest Control
When using desiccants (diatomaceous earth or boric acid) to control bed bugs it is critical to use those that are registered by EPA and labeled for bed bug control.
Desiccants that are intended for other uses, such as food-grade or for use in swimming pools, pose an increased inhalation risk to people.

All of Safer® Brand's products stem from our belief that the health of our soil impacts the health of our food, our bodies, and the planet. We want to go back to the time when soil was safe.
Because it's no secret that chemical pesticides deplete the nutritional value of our soil and the microorganisms essential for the health of plants. When plants are fed a chemically – altered diet, the yield suffers and our health is compromised.
IT'S ALL ABOUT CREATING CLEAN SOIL, A CLEAN HOME AND A CLEAN CONSCIENCE
Our commitment to organic living doesn't stop with a healthy garden. Safer® Brand's line of pest control products for organic gardening eliminates harmful invaders in order to create an optimal environment for plants to thrive, season after season. Gardening eliminates harmful invaders in order to create an optimal environment for plants to thrive, season after season.
WE SEE THE BEAUTY AND BOUNTY OF GOING ORGANIC.
Organic gardening creates goodness. Gardens soak up the soil's rich nutrients without taking in harmful chemicals. Homes are free from toxic sprays and insecticides. Parents worry less about their family's wellbeing.
And, most delicious of all, that backyard-grown meal is packed with richer flavors, more nutrients, and a peace of mind.
Diatomaceous Earth - Food Grade Benefits & Uses incl. Pest Control
10 Reasons To Use Diatomaceous Earth In The Garden
Garden Safe Brand Diatomaceous Earth - YouTubeDiatomaceous Earth For Cats - What Is It And What Can It Do?Diatomaceous Earth
Food Grade Diatomaceous Earth

Monday, November 25, 2019

DIATOMACEOUS EARTH - Diatomite, also known as diatomaceous earth, is the naturally occurring fossilized remains of diatoms. Diatoms are single-celled aquatic algae. The properties which make diatomite valuable include low density, high porosity, high surface area, abrasiveness, insulating properties, inertness, absorptive capacity, brightness, and high silica content. The most important use relative of high-quality diatomite is as a filtering media. The naturally occurring fossilized remains of diatoms have innate filtering characteristics due to their unique honeycomb structure. Their filtering qualities are used in beer and wine making, pharmaceutical manufacturing, motor oil processing, and to filter swimming pool water.

Image result for images diatomaceous earth
.............................................................................................................................................................
Image result for images diatomaceous earth
Diatomite

What is Diatomite?
The Industrial Minerals Association


Image result for images diatomaceous earth

Diatomite, also known as diatomaceous earth, is the naturally occurring fossilized remains of diatoms.
Diatoms are single-celled aquatic algae. They belong to the class of golden brown algae known as Bacillariophyceae.  
Diatomite is a near pure sedimentary deposit consisting almost entirely of silica.  
The Greeks first used diatomite over 2,000 years ago in pottery and brick.
There are many diatomite deposits throughout the world, but those of high-purity which are commercially viable are rare. 
The properties which make diatomite valuable include low density, high porosity, high surface area, abrasiveness, insulating properties, inertness, absorptive capacity, brightness, and high silica content.  
Diatomite has a wide variety of uses, and is a component in hundreds of products, or vital to the manufacturing process of thousands more.
Filter Aids:  The most important use relative of high-quality diatomite is as a filtering media.  
The naturally occurring fossilized remains of diatoms have innate filtering characteristics due to their unique honeycomb structure.  
Their filtering qualities are used in beer and wine making, pharmaceutical manufacturing, motor oil processing, and to filter swimming pool water.  
For almost 100 years diatomite has been the workhorse of food and beverage processing.  
Almost every shelf in the grocery store contains a product which has been filtered by diatomite. 
Functional Additives:  In paints, diatomite alters glass and sheen, extends primary pigments, adds bulk and strength, controls permeability and enhances coating adhesion.  
In plastics, diatomite serves as an antiblocking agent which helps in the separation of plastic parts in manufacturing, and in the separation of plastic bags by the consumer.
Absorbents:  Due to such characteristics as porosity and high surface area, diatomite is highly absorbent and is very useful in the clean-up of spills in the automotive, industrial, janitorial and waste remediation industries. 
Soil Amendments:  When diatomite is incorporated into soil, it serves to reduce compaction, and increase water and air permeation.  
It also increases plant available water, firms soggy soils, loosens hard to work soils, provides better drainage, aids in nutrient transfer, and improves root growth.
In such applications as golf courses, and other landscaped areas it helps absorb and hold water, reducing the amount of water used.
Natural Insecticide:  When insects come in contact with diatomaceous earth, it absorbs their protective wax coating and their shells are damaged by the glassy diatoms. This combination causes them to die by dehydration.
There is no survival and no built-up immunity as there is with chemical insecticides. Also, it does not break down as chemicals do. 
Other examples of the universe of products and uses which benefit from diatomite include dental fillings, seed coatings, roofing compounds, adhesives, sealants, matches, oil drilling compounds, specialty concretes, and paper.
The Industrial Minerals Association - North America (IMA-NA) is the representative voice of companies which extract and process a vital and beneficial group of raw materials known as industrial minerals. Industrial minerals are the ingredients for many of the products used in everyday life, and our companies and the people they employ are proud of their industry and the socially responsible methods they use to deliver these beneficial resources.
IMA-NA represents ball clay, barite, bentonite, borates, calcium carbonate, diatomite, feldspar, industrial sand, kaolin, magnesia, soda ash, talc and wollastonite.
Industrial minerals . . . Your world is made of them!
Image result for images diatomaceous earth
Image result for images diatomaceous earthImage result for images diatomaceous earth