Showing posts with label Aeration. Show all posts
Showing posts with label Aeration. Show all posts

Tuesday, December 22, 2020

BIOLOGICAL WASTEWATER TREATMENT WITH ACTIVATED-SLUDGE PROCESS – In a simplified flow diagram for biological processes used for wastewater treatment, the influent wastewater (e.g. municipal wastewater) goes through several stages in which different compound are removed out of the wastewater. In the Bar Rack coarse solids are removed, such as sticks, rags, and other debris in untreated wastewater by interception. By use of fine screening even floatable matter and algae are removed. In the Grit Chamber grit is removed consisting of sand, gravel, cinders, or other heavy solid materials that have subsiding velocities or specific gravities substantially greater than those of the organic putrescible solids in wastewater. The Primary Clarifier is a basin where water has a certain retention time where the heavy organic solids can sediment (suspended solids). Efficiently designed and operated primary sedimentation tanks should remove from 50 to 70 percent of the suspended solids and 25 to 40 percent of the BOD. The influent of the aeration tank is mixed with activated sludge and in the Aeration Tank the mixed liquor is aerated. By aerating the mixed liquor the aerobic processes will be stimulated, the growth rate of bacteria will be must faster. Because the bacteria deplete the substrate, flocculation takes place. The soluble substrate becomes a solid biomass. These flocks of biomass will sediment in the Secondary Clarifier. At the end of the process the effluent water is treated to Disinfect it and make it free of disease-causing organisms. Lenntech provides innovative and sustainable solutions for water treatment and liquid separation, focusing on industrial applications.

............................................................................................................................................................................................................................................................................................................................

Biological Wastewater Treatment with Activated-Sludge Process

Lenntech Water Treatment Solutions

 

The picture below shows a simplified flow diagram for biological processes used for wastewater treatment.


The influent wastewater (e.g. municipal wastewater) goes through several stages in which different compound are removed out of the wastewater.

For more information about the process, please click on one of the process stages.

Simplified flow diagram for a biological wastewater treatment with a activated-sludge process.

In the Bar Rack coarse solids are removed, such as sticks, rags, and other debris in untreated wastewater by interception.

By use of fine screening even floatable matter and algae are removed. (p. 314)

In the Grit Chamber grit is removed consisting of sand, gravel, cinders, or other heavy solid materials that have subsiding velocities or specific gravities substantially greater than those of the organic putrescible solids in wastewater. (p. 384)

The Primary Clarifier is a basin where water has a certain retention time where the heavy organic solids can sediment (suspended solids). (p.384)

Efficiently designed and operated primary sedimentation tanks should remove from 50 to 70 percent of the suspended solids and 25 to 40 percent of the BOD. (p.396)

The influent of the aeration tank is mixed with activated sludge and in the Aeration Tank the mixed liquor is aerated.

By aerating the mixed liquor the aerobic processes will be stimulated, the growth rate of bacteria will be must faster.

Because the bacteria deplete the substrate, flocculation takes place.

The soluble substrate becomes a solid biomass. These flocks of biomass will sediment in the Secondary Clarifier.

At the end of the process the effluent water is treated to Disinfect it and make it free of disease-causing organisms.

Lenntech Water Treatment Solutions, established in 1993, is a design and manufacturing company situated in The Netherlands, near the Technical University of Delft.
Lenntech provides innovative and sustainable solutions for water treatment and liquid separation, focusing on industrial applications. With an experienced team of sales, environmental, chemical, mechanical and electrical engineers we are specialized in providing turnkey and customized water purification and membrane separation systems for numerous different industries and applications.
Our wide range of technologies and extended know-how in all water-related sectors will guarantee you a cost-efficient solution that will meet your water quality requirements. Each water and liquid stream are unique, and we prioritize research and development to keep our solutions and products in the front line.
https://www.lenntech.com/wwtp/wwtp-overview.htm


You might also like:

 

Activated Sludge Process

IWA Publishing 

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/11/activated-sludge-process-activated.html

...........................................................................................................................................................................................................................................................................................

Aerobic Wastewater Treatment and How They Work

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/08/aerobic-wastewater-treatment-systems.html

...........................................................................................................................................................................................................................................................................................

Wastewater Treatment

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/06/wastewater-treatment-wastewater.html

...........................................................................................................................................................................................................................................................................................

How Modern Wastewater Treatment Changed our World

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/08/how-modern-wastewater-treatment-changed.html

...........................................................................................................................................................................................................................................................................................

Anti-Gravity Water Transport in Trees

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2020/06/anti-gravity-water-transport-in-trees.html

...........................................................................................................................................................................................................................................................................................

An Ocean of Viruses

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2020/05/an-ocean-of-viruses-virus-is-very-tiny.html


Friday, July 31, 2020

WHY WATER APPEARS WHITE WHILE GOING OVER A WATERFALL - Water has dissolved oxygen inside of it. It is this dissolved oxygen that helps sustain the lives of aquatic creatures. Normally, you don’t actually see any evidence of oxygen being dissolved in water (apart from the fact that, you know, fish live there). Humans will never understand and appreciate the true value of dissolved oxygen in water bodies (ponds, lakes, rivers etc.) as much as fish do. Thus, in a still water body, you don’t see the dissolved oxygen, but when water falls over a cliff – like in a waterfall – the dissolved oxygen presents itself, or rather, makes its presence felt. When water is standing still, or moving at a very relaxed, gentle pace, oxygen dissolves in it through diffusion from the surrounding air. However, when water flows rapidly, its flow becomes turbulent. As a result, it offers more surface area for oxygen to diffuse compared to a flat, slow-moving river. In addition to that, churning waters create turbulence, which causes air to hit the water at a high pressure, allowing more oxygen to dissolve. This sort of aeration creates tons of small bubbles in water, which are eventually responsible for the white color of waterfalls. If you consider a body of water that’s sitting stationary, then you have one surface from which light can reflect (or refract). Just like a mirror, due to the even surface of a plain mirror, light rays that fall on it are reflected at a constant angle.

Waterfall whitish water
..............................................................................................................................................

Why Does Water Appear White While Going Over A Waterfall?

By Ashish



If water is really stirred up, or moving at a high pace (a pace that you can expect from waterfalls), then the trapped air in the water creates bubbles.
It is these bubbles (tiny air pockets) that make a waterfall look white.
Water is colorless; we all know that, right?
Still, the color of snow – which is essentially frozen water – is white.
Similarly, water that goes over a waterfall also appears to be white, despite actually being colorless.
Why is that water white?
What’s going on here?
The answer of this lies in how light interacts with matter, along with aeration.
Water and dissolved oxygen
You might already know that water has dissolved oxygen inside of it.
It is this dissolved oxygen that helps sustain the lives of aquatic creatures.
Normally, you don’t actually see any evidence of oxygen being dissolved in water (apart from the fact that, you know, fish live there).
, Why Does Water Appear White While Going Over A Waterfall?, Science ABC, Science ABCHumans will never understand and appreciate the true value of dissolved oxygen in water bodies (ponds, lakes, rivers etc.) as much as fish do.
Thus, in a still water body, you don’t see the dissolved oxygen, but when water falls over a cliff – like in a waterfall – the dissolved oxygen presents itself, or rather, makes its presence felt.
Aeration
When water is standing still, or moving at a very relaxed, gentle pace, oxygen dissolves in it through diffusion from the surrounding air.
However, when water flows rapidly, its flow becomes turbulent.
As a result, it offers more surface area for oxygen to diffuse compared to a flat, slow-moving river.
In addition to that, churning waters create turbulence, which causes air to hit the water at a high pressure, allowing more oxygen to dissolve.
This sort of aeration creates tons of small bubbles in water, which are eventually responsible for the white color of waterfalls.
How light reflects off water in a waterfall
If you consider a body of water that’s sitting stationary, then you essentially have one surface from which light can reflect (or even refract).
Just like a mirror, due to the even surface of a plain mirror, light rays that fall on it are reflected at a constant angle.
However, if you roughen up the mirror surface (by denting, scratching or even breaking it), then light rays would still be reflected off it, but in random directions. That’s why crushed glass also looks whitish.
Similarly, in a water body where the water does not show much movement, light reflects at a constant angle.
However, when there’s movement in the water, the reflections you see are no longer as clear.
Waterfall whitish water
Tiny air pockets make a waterfall look whitish.
Moreover, if the water is really stirred up, or moving at a high pace (a pace that you can expect from waterfalls), then the trapped air in the water creates bubbles. It is these bubbles (tiny air pockets) that make a waterfall look white.
These bubbles have their individual surfaces, all of which reflect some part of the light falling on them.
This is why you can see reflections of objects on bubbles if you look really closely.
As you can imagine, there are a great deal of bubbles in a waterfall, and all of them are of varying sizes.
This is why light gets reflected in so many random directions, and what you eventually see is an evenly white color of the waterfall.
This is the same mechanism that makes clouds look white.
It’s just a lot of water droplets suspended in the air, all of which scatter light, resulting in the whitish hue of the cloud.

Ashish is a Science graduate (Bachelor of Science) from Punjabi University (India). He spends a lot of time watching movies, and an awful lot more time discussing them. He likes Harry Potter and the Avengers, and obsesses over how thoroughly Science dictates every aspect of life… in this universe, at least.



You might also like:

 

Hydroelectricity From Waterfalls

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/05/hydroelectricity-from-waterfalls-type.html

............................................................................................................................................................................................................................................................................................

Follow the River

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2020/11/follow-river-god-wants-to-prosper-his.html

.......................................................................................................................................................................................................

Fountains of Endless Life

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2020/12/fountains-of-endless-life-holy-spirit.html

............................................................................................................................................................................................................................................................................................

Anti-Gravity Water Transport in Trees

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2020/06/anti-gravity-water-transport-in-trees.html

............................................................................................................................................................................................................................................................................................

Water in Bible Prophecy

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2019/12/water-in-bible-prophecy-bible-prophecy.html

............................................................................................................................................................................................................................................................................................

Times of refreshing are coming in your life!

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2019/11/times-of-refreshing-are-coming-in-your.html

Waterfall whitish water

Saturday, February 8, 2020

WASTEWATER TREATMENT – The processes & technologies to remove the contaminants from water & improve its quality is recognized all over the world. There are different methods of water treatment the selection of which depends upon the type of source & purpose of use of water. The choice of which treatment to depends on the characteristics of the water, the type of the water quality problems present, & the costs of treatments. Despite the multitude of technological processes for production of water for potable or other uses, the general principles of purification are approximately the same. These principles provide the following range of the primary procedures: Removal from the water of heterophase contaminants by sedimentation or coagulation & sedimentation, filtration, &, less often, flotation. Elimination of admixture of active pathogenic bacteria & prevention of their reproduction (disinfection of water) by chlorination, iodination, ozonation, silvering, electro-magnetic radiation, & electro chemical & other methods.

Image result for images Treatment of WasteWater
................................................................................................................................................
Image result for images Treatment of WasteWater effluent
Wastewater Treatment
Purpose and Methods of Treatment of Wastewater
By: Haseeb Jamal 




Methods of Wastewater Treatment
Methods of Treatment of Waste WaterThere are different methods of water treatment the selection of which depends upon the type of source & purpose of use of water.
Following are the methods of waste water treatment:
Screening
Plain sedimentation
Coagulation & flocculation
Secondary sedimentation
Filtration
Disinfection
Aeration
Softening etc.
Treatment of Water
The prehistoric and the Old civilization established themselves near water sources.
While the importance of water quantity for drinking purposes was apparent to our ancestors, treatment processes was not well known.
The methods of Waste Water treatment originally focused on improving the aesthetic and Sight qualities of drinking.
Ancient Sanskrit & Ancient Greek writings recommended water treatment methods such as filtering through charcoal, exposing to sunlight, boiling, & straining.
During 1700's filtration was established as an effective means of removing the particles from water and treating it.
So, the earlier purification process was based on filtering the water to remove the Impurities & appearance of colloidal particles present (EPA 2000).
During the mid to late 1800, scientists gained a greater understanding of the sources & effects of drinking water contaminants, especially those that were not visible to naked eye.
In 1800's Louis Pasteur demonstrated the germ theory of disease, which explained how microorganism could transmit disease through media like water.
During the late nineteen & twentieth century's concerns regarding drinking water quality continued to focus mostly on disease causing microbes known as pathogenic bacteria in public water supplies.
It was known that turbidity is not only the aesthetic problem, particles in source water such as fecal matter, could harbor pathogens. Therefore, filtration was established as an effective means of removing these particles.
The clean & reliable water supply requirement was not recognized, until the second half of nineteen century, when the nature of infectious disease was first recognized.
The water supply becomes the major source to transmit these diseases. Therefore, proper treatment of water becomes essential.
The process of making water suitable for certain use such as domestic, industrial or any other use is called treatment of water.
The degree & type of treatment depends on the source of water & the purpose for which the water is required.
Generally, the water from surface source is treated conventionally to make it suitable for domestic as well as industrial use.
The ground water is generally suitable for drinking purposes but should be treated for industrial use to remove the hardness of water.
Purpose of Waste Water Treatment
It is desirable to treat water for a number of reasons including:
To prevent pathogenic microorganisms causing the disease.
To control unpleasant taste & appearance of particles.
To remove the excessive color of water & turbidity.
To extract the chemicals & dissolved minerals.
Procedures for Waste Water Treatment
Methods of Waste Water Treatment ProcessDespite the existence of a multitude of technological processes for production of water for potable or other uses, the general principles of purification are approximately the same.
These principles provide the following range of the primary procedures:
Removal from the water of heterophase contaminants by sedimentation or coagulation & sedimentation, filtration, &, less often, flotation. As a result of such treatment, water turbidity & color index are reduced.
Elimination of admixture of active pathogenic bacteria & prevention of their reproduction (disinfection of water) by chlorination, iodination, Ozonation, silvering, electro-magnetic radiation, & electro chemical & other methods.
Adjustment of water composition in dissolved (homophase) admixtures. This stage can include a large diversity of technological processes depending on the composition & quality of initial water. First, this includes the elimination of smell, taste. & toxic trace pollutant of water by methods of aeration & degassing, oxidation, adsorption, & removal from the water of iron, manganese, silicon, & fluorides.
The final stage of water treatment might include water fluorination & softening (hardness removal).
In regions with a deficiency of freshwater but availability of sources of brackish & saline water, it may also be necessary to carry out water desalination.
Special water treatment, for example by radiation method, as well its purification from specific contaminants including radioactive matters or particular highly toxic chemicals.
The processes & technologies used to remove the contaminants from water & to improve its quality is recognized all over the world.
The choice of which treatment to use from a great variety of available processes depends on the characteristics of the water, the type of the water quality problems to be present, & the costs of different treatments.
Methods of Waste Water Treatment Process
As pointed out earlier that all the above techniques may or may not be used for treating particular nature of water.
The necessity of a few or all of these treatments depends solely upon the quality of available raw water.
Before we describe these techniques in details, let us summarize the functions served by each of these techniques in effecting purification of raw water.
Most of the big & visible objects, such as trees, branches, sticks, vegetation, fish, animal life etc., present in raw water of surface material can be removed by bar & screen operations. This process is called screening.
The coarser suspended material can then be removed by letting the water settle in sedimentation basins. The process is called plain sedimentation.
The effectiveness of sedimentation may however, be increased by mixing certain chemicals with water, to form flocculent precipitates, which carries the suspended particles as it settles. The process is called chemical coagulation.
The finer particles in suspension, which may avoid settling in sedimentation basins even after using the chemical coagulation, may then be removed by filtering the water through filters. This process is called filtration
Filtered water that may still contain pathogenic bacteria is then made bacteria-proof by adding certain chemicals such as chlorine etc. This process of killing of germs is called disinfection.
The resulting water, though now becomes safe, yet may not be attractive to the tongue of consumers.
Unpleasant tastes & odors may then, therefore, have to be removed by adding certain chemical compounds such as activated carbon. This process is called adsorption.
The resulting water may sometimes be much harder than permissible level & may, therefore, have to be softened by process called the softening.
Sometimes, the resulting water may be given further treatment, such as
fluoridation (i.e. the addition of soluble fluoride for controlling dental caries),
liming (i.e. addition of lime in order to control acidity & reduce the corrosive action),
re-carbonation (i.e. addition of carbon dioxide so as to prevent deposition of calcium carbonate scale), the
desalination (i.e. removal of excessive salt, if present)

I am a Civil Engineer, graduated from University of Engineering and Technology, Peshawar, Pakistan in 2010. I also have a PG-Diploma in Disaster Management and MS in Urban Infrastructure Engineering (In Progress). My expertise include civil related softwares like AutoCAD, SAP2000, MS Project, Primavera, MS Office and GIS. My technical skills include project management, monitoring and evaluation, structural assessment, disaster risk management, Quantity survey, land survey, material testing, site management and technical writing. I am trained in writing project progress reports as well as proposals and concept papers. I have also received advanced training on surveying, proposal writing, Monitoring and Evaluation of projects as well as organizations.
I have worked as Project Engineer at National Research and Development Foundation, Peshawar and CENCON Associates. I also worked with Spectra Engineering Solutions as Senior Civil Engineer in monitoring of World Bank and UNDP funded projects all over Khyber Pakhtunkhwa and FATA. Currently, I am working as Deputy Manager Development at NayaTel, Peshawar.

Tuesday, September 10, 2019

LARGE-SCALE WATER SUPPLY TREATMENT TECHNOLOGIES - As urban populations increase, there is a need to find new sources to meet the growing demand. If groundwater is available this can often be used with minimal treatment but any surface water source will need to be treated to make it safe. For towns and cities, the water supply is best provided by large mechanised water treatment plants that draw water from a large river or reservoir, using pumps. The size of the treatment plant required is determined by the volume of water needed, which is calculated from the number and type of users and other factors. There are often seven steps in large-scale water treatment for urban municipal water supply. The water utility will ensure by regular analysis of the water that it adheres to quality standards for safe water.

...................................................................................................................................................................
Large-scale Water Supply
Water Treatment Technologies for Large-scale Water Supply
The Open University




The need for large-scale water treatment
Water treatment is the process of removing all those substances, whether biological, chemical or physical, that are potentially harmful in water supply for human and domestic use.
This treatment helps to produce water that is safe, palatable, clear, colourless and odourless. Water also needs to be non-corrosive, meaning it will not cause damage to pipework.
In urban areas, many people live close together and they all need water. This creates a demand for large volumes of safe water to be supplied reliably and consistently, and this demand is growing.
As urban populations increase, there is a need to find new sources to meet the growing demand. If groundwater is available this can often be used with minimal treatment but any surface water source will need to be treated to make it safe.
For towns and cities, the water supply is then best provided by large mechanised water treatment plants (Figure 5.1) that draw water from a large river or reservoir, using pumps.
(‘Mechanised’ means that machines, such as pumps and compressors, are used). The treated water is then distributed by pipeline.
The size of the treatment plant required is determined by the volume of water needed, which is calculated from the number and type of users and other factors.
Stages in large-scale water treatment
There are often seven steps (Figure 5.2) in large-scale water treatment for urban municipal water supply (Abayneh, 2004).
Each of the steps will be described in turn in this section. The water utility (the organisation that runs the treatment plants and water distribution system) will ensure by regular analysis of the water that it adheres to quality standards for safe water.
Figure 5.2  The seven steps often used in the large-scale treatment of water.
5.2.1  Screening
To protect the main units of a treatment plant and to aid in their efficient operation, it is necessary to use screens to remove any large floating and suspended solids that are present in the inflow.
These materials include leaves, twigs, paper, rags and other debris that could obstruct flow through the plant or damage equipment. There are coarse and fine screens.
Coarse screens (Figure 5.3) are steel bars spaced 5–15 cm apart, which are employed to exclude large materials (such as logs and fish) from entering the treatment plant, as these can damage the mechanical equipment.
The screens are made of corrosion-resistant bars and positioned at an angle of 60º to facilitate removal of the collected material by mechanical raking.
Figure 5.3  A coarse screen.
Fine screens, which come after the coarse screens, keep out material that can block pipework at the plant. They consist of steel bars which are spaced 5–20 mm apart.
A variation of the fine screen is the microstrainer (Figure 5.4) which consists of a rotating drum of stainless steel mesh with a very small mesh size (ranging from 15 µm to 64 µm, i.e. 15–64 millionths of a metre).
Suspended matter as small as algae and plankton (microscopic organisms that float with the current in water) can be trapped.
The trapped solids are dislodged from the fabric by high-pressure water jets using clean water, and carried away for disposal.
Figure 5.4  Diagram of a microstrainer.
Aeration
After screening, the water is aerated (supplied with air) by passing it over a series of steps so that it takes in oxygen from the air.
This helps expel soluble gases such as carbon dioxide and hydrogen sulphide (both of which are acidic, so this process makes the water less corrosive) and also expels any gaseous organic compounds that might give an undesirable taste to the water.
Aeration also removes iron or manganese by oxidation of these substances to their insoluble form.
Iron and manganese can cause peculiar tastes and can stain clothing. Once in their insoluble forms, these substances can be removed by filtration.
In certain instances, excess algae in the raw water can result in algal growth blocking the sand filter further down the treatment process.
In such situations, chlorination is used in place of, or in addition to, aeration to kill the algae, and this is termed pre-chlorination.
This comes before the main stages in the treatment of the water. (There is a chlorination step at the end of the treatment process, which is normal in most water treatment plants).
The pre-chlorination also oxidises taste- and odour-causing compounds.
Coagulation and flocculation
After aeration, coagulation takes place, to remove the fine particles (less than 1 Âµm in size) that are suspended in the water.
In this process, a chemical called a coagulant (with a positive electrical charge) is added to the water, and this neutralises the negative electrical charge of the fine particles.
The addition of the coagulant takes place in a rapid mix tank where the coagulant is rapidly dispersed by a high-speed impeller (Figure 5.5).
Since their charges are now neutralised, the fine particles come together, forming soft, fluffy particles called ‘flocs’.
(Before the coagulation stage, the particles all have a similar electrical charge and repel each other, rather like the north or south poles of two magnets.)
Two coagulants commonly used in the treatment of water are aluminium sulphate and ferric chloride.
Figure 5.5  The coagulation–flocculation process.
The next step is flocculation. Here the water is gently stirred by paddles in a flocculation basin (Figure 5.5) and the flocs come into contact with each other to form larger flocs.
The flocculation basin often has a number of compartments with decreasing mixing speeds as the water advances through the basin (Figure 5.6(a)).
This compartmentalised chamber allows increasingly large flocs to form without being broken apart by the mixing blades.
Chemicals called flocculants can be added to enhance the process. Organic polymers called polyelectrolytes can be used as flocculants.
Sedimentation
Once large flocs are formed, they need to be settled out, and this takes place in a process called sedimentation (when the particles fall to the floor of a settling tank).
The water (after coagulation and flocculation) is kept in the tank (Figure 5.6(b)) for several hours for sedimentation to take place. The material accumulated at the bottom of the tank is called sludge; this is removed for disposal.
Figure 5.6  Flocculation chambers (a) and a sedimentation tank (b) at Gondar water treatment works.
Filtration
Filtration is the process where solids are separated from a liquid. In water treatment, the solids that are not separated out in the sedimentation tank are removed by passing the water through beds of sand and gravel.
Rapid gravity filters (Figure 5.7), with a flow rate of 4–8 cubic metres per square metre of filter surface per hour (this is written as 4–8 m–3 m–2 h–1) are often used.
When the filters are full of trapped solids, they are backwashed.
In this process, clean water and air are pumped backwards up the filter to dislodge the trapped impurities, and the water carrying the dirt (referred to as backwash) is pumped into the sewerage system, if there is one.
Alternatively, it may be discharged back into the source river after a settlement stage in a sedimentation tank to remove solids.
Figure 5.7  Cross-sectional diagram of a rapid gravity sand filter.
Chlorination
After sedimentation, the water is disinfected to eliminate any remaining pathogenic micro-organisms.
The most commonly used disinfectant (the chemical used for disinfection) is chlorine, in the form of a liquid (such as sodium hypochlorite, NaOCl) or a gas. It is relatively cheap, and simple to use.
When chlorine is added to water it reacts with any pollutants present, including micro-organisms, over a given period of time, referred to as the contact time.
The amount of chlorine left after this is called residual chlorine. This stays in the water all the way through the distribution system, protecting it from any micro-organisms that might enter it, until the water reaches the consumers.
World Health Organization Guidelines (WHO, 2003) suggest a maximum residual chlorine of 5 mg l–1 of water.
The minimum residual chlorine level should be 0.5 mg l–1 of water after 30 minutes’ contact time (WHO, n.d.).
There are other ways of disinfecting water (e.g. by using the gas ozone, or ultraviolet radiation) but these do not protect it from microbial contamination after it has left the water treatment plant.
Following disinfection the treated water is pumped into the distribution system.
Supplementary treatment
Supplementary treatment may sometimes be needed for the benefit of the population. One such instance is the fluoridation of water, where fluoride is added to water.
It has been stated by the World Health Organization that ‘fluoridation of water supplies, where possible, is the most effective public health measure for the prevention of dental decay’ (WHO, 2001).
The optimum level of fluoride is said to be around 1 mg per litre of water (1 mg l–1).
The safe level for fluoride is 1.5 mg l–1.
In such high-fluoride areas, removal or reduction of fluoride (termed defluoridation) is essential.
The simplest way of doing this is to blend the high-fluoride water with water that has no (or very little) fluoride so that the final mixture is safe. If this is not possible, technical solutions may be applied.
Two of these, the Nakuru Method and the Nalgonda Technique, used in Ethiopia, are described below.
The Nakuru Method (Figure 5.8) involves a filter with bone char (charcoal produced from animal bone) and calcium phosphate to adsorb the fluoride (Kung, 2011).
There have been reservations on the use of bone char, and alternatives for defluoridation, such as activated alumina, are being tested in Addis Ababa (Alemseged, 2015).
Figure 5.8  The Nakuru method for defluoridation using plastic buckets and piping.
The Nalgonda technique for defluoridation (Suneetha et al., 2008) uses aluminium sulphate and calcium oxide to remove fluoride.
The two chemicals are added to and rapidly mixed with the fluoride-contaminated water and then the water is stirred gently.
Flocs of aluminium hydroxide form and these remove the fluoride by adsorption and ion exchange. The flocs are then removed by sedimentation.
Management of wastes from water treatment plants
Coarse screenings are usually sent to a landfill or other waste disposal site. Fine screenings (in the form of a slurry) may be discharged to a sewer, if there is one, or sent to a landfill.
The sludge from the sedimentation tank can be sent to landfill, or to a sewage treatment plant. In the latter it is added to the incoming sewage, where it can help settlement of solids.
The backwash from the sand filter is discharged into the sewer or returned to the river after settlement of solids.
Packaging waste such as chemical drums can be returned to the supplier for reuse. Wood and cardboard waste can be recycled.
Sustainability and resilience in water treatment
In Study Session 4 you read about some factors that can influence the sustainability of a water source. For example, reducing soil erosion by planting trees and retaining vegetation can reduce the amount of silt that accumulates in a reservoir and prolong its life.
For the water treatment process itself to be sustainable (meaning that it can be maintained at its best for a long time) it has to be simple to operate and maintain.
Complex systems should be avoided and wherever possible locally available materials should be used. For example, if a coagulant is required, the one that can be purchased in-country will be preferable to one that has to be imported.
Water treatment plants consume energy, and if this energy could be supplied through renewable sources (such as solar or wind) it will keep operating costs down and improve sustainability.
The plant and distribution system should be made of robust materials that will have a long operating life. It can be difficult to obtain spare parts, so there should be plans in place for procurement of replacements.
Another important factor in sustainability is an effective maintenance system, which needs planning and, importantly, requires well-trained and motivated staff.
Resilience, in the context of a water treatment system, is its ability to withstand stress or a natural hazard without interruption of performance or, if an interruption does occur, to restore operation rapidly.
With water treatment plants located very close to water sources, having too much water can be just as much a problem for operations as having too little.
Storms and floods, exacerbated by climate change, may overwhelm systems and interrupt operations, so appropriate flood defence measures must be in place.
The need to be resilient to these impacts is another reason why the equipment and construction of the plant should be of a high standard.
Basic calculations in water supply
A critical factor in the sustainability of a water supply system is ensuring that the volume of water provided is sufficient to meet current and future demand.
Table 5.1 shows the water supply requirements for towns of different sizes in Ethiopia according to the Growth and Transformation Plan II.
Table 5.1- Water supply requirements for urban areas in Ethiopia (note that for categories 1–4, the water should be available at the premises). (MoWIE, 2015)
Urban category
Population
Minimum water quantity (litres per person per day)
Maximum fetching distance (m)
1   Metropolitan
>1,000,000
100
–
2   Big city
100,000–1,000,000
80
–
3   Large town
50,000–100,000
60
–
4   Medium town
20,000–50,000
50
–
5   Small town
<20,000
40
250
The water needs of a town can be estimated from the size of the population and the water requirements of users such as schools, health facilities and other institutions within it.
The guidelines for the water supply requirement of different categories of towns, shown in Table 5.1, may be used to estimate the minimum quantity of water that should be supplied for a given population.
There will be institutions in the town with particular water requirements. Table 5.2 shows the requirements of some of these in Ethiopia.
Table 5.2  Water requirements for various types of institutions in Ethiopia. (Adapted from Kebeda and Gobena, 2004)
Institution
Water requirement (litres per person per day)
Health centre
135
Hospital
340
Day school
18.5
Boarding school
135
Office
45
Restaurant
70
Once the consumers’ total water requirement has been calculated, an allowance should be added for leakage losses, and for water use by the water utility itself (for washing of tanks, etc.). This allowance could, for example, be 15%.
The water will have to be stored in service reservoirs. Service reservoirs have to hold a minimum of 36 hours’ or 1.5 days’ water supply.
Water provision for a small town
Imagine a town with a population of 5000 people, and a health centre that treats 100 people a day.
The minimum water requirement per day for the population (using the guidelines in Table 5.1) will be 40 litres x 5000 = 200,000 litres, or 200 m3.
The water requirement for the health centre would be 135 litres x 100 = 13,500 litres, or 13.5 m3. The total water requirement each day would be 200 + 13.5 = 213.5 m3.
Allowing for 15% leakage and water usage by the water utility, each day the required volume of treated water supplied would be:
213.5 m3 x 1.15 = 245.5 m3. This could be rounded up to 246 m3.
The service reservoir would need to hold a minimum of 36 hours’ of supply (1.5 days). This means that the service reservoir size would be:
46 m3 x 1.5 = 369 m3. This could be rounded up to 370 m3.
The water requirement would therefore be 246 m3 per day, and the minimum service reservoir capacity required would be 370 m3.
This volume could be held in one service reservoir or shared between two, located in different parts of the town.
These simple calculations are included here to give you an idea of the approach that would be taken to planning a new water supply system.
In practice, the process would require many different engineering, economic and environmental considerations involving a team of experts.

The Open University is a world leader in the development of free Open Educational Resources (OER) as well as having already taught over 1.8 million people worldwide. The OU is also the largest academic institution in the UK with over 170,000 students currently enrolled on its formal qualifications. OpenLearn can help get you started but you might want to jump straight to The OU to see what qualifications you can start today!

 







Figure 5.8  The Nakuru method for defluoridation using plastic buckets and piping.











Figure 5.1  The water treatment plant at Gondar, Ethiopia


Figure 5.2  The seven steps often used in the large-scale treatment of water.

Figure 5.3  A coarse screen.



Figure 5.4  Diagram of a microstrainer.


Figure 5.5  The coagulation–flocculation process.



Figure 5.6  Flocculation chambers (a) and a sedimentation tank (b) at Gondar water treatment works.



Figure 5.7  Cross-sectional diagram of a rapid gravity sand filter.