Showing posts with label Building construction. Show all posts
Showing posts with label Building construction. Show all posts

Sunday, January 10, 2021

TYPES OF SOIL TESTING FOR CONSTRUCTION - Soil testing is a very important part of building and road construction. In fact, no construction project can proceed without first making sure the soil can support the load. Thus, the purpose of soil testing for construction is to determine the suitability of the soil for the type of construction to be done. The test is also done to determine the presence of groundwater. There are several different types of preconstruction soil testing. The type of test depends on the properties of the soil. The design of the foundation is based on the soil test report. Some tests are conducted at the construction site while others are done in the laboratory. Moisture Content Test - This is a very important test for building construction. Specific Gravity Test - The specific gravity of any substance is the ratio of density to the density of the water. Dry Density Test - The dry density of soil is the weight of soil particles in a given volume of a sample. Atterberg Limits Test - This test is done on the fine-grained soil to measure its critical water content. There are three limits that determine the properties of fine-grained soil under different conditions: liquid limit, plastic limit, and shrinkage limit. Proctor’s Compaction Test - This test is conducted to find out the compaction characteristics of the soil. The soil sample is air dried and then divided into four to six smaller samples. Their water content is adjusted by adding 3 percent to 5 percent water.

......................................................................................................................................................................................................................................................................................................................................................

5 Types Of Soil Testing For Construction

All American Environmental

 

 

SOIL TESTING FOR CONSTRUCTION

Soil testing is a very important part of building and road construction.

In fact, no construction project can proceed without first making sure the soil can support the load.

Thus, the purpose of soil testing for construction is to determine the suitability of the soil for the type of construction to be done.

The test is also done to determine the presence of groundwater.

Types of soil tests for construction

There are several different types of preconstruction soil testing.

The type of test depends on the properties of the soil. The design of the foundation is based on the soil test report.

Some tests are conducted at the construction site while others are done in the laboratory.

Moisture Content Test

This is a very important test for building construction.

The moisture content of the soil is determined using several methods, including the oven-drying method, calcium carbide method, torsion balance method, Pycnometer method, sand bath method, radiation method, and alcohol method.

The most common method is the oven-drying method, which involves weighing the sample soil, drying it in an oven at a 110 degrees Celsius (+/- 5 degrees), and weighing it again.

The difference in the before and after weights is the weight of water in the soil.

Specific Gravity Test

The specific gravity of any substance is the ratio of density to the density of the water.

It is determined using one of several methods that include the density bottle method, Pycnometer method, gas jar method, shrinkage limit method, and measuring flask method.

Of these, the most commonly used in soil analysis are the density bottle and Pycnometer methods.

Dry Density Test

The dry density of soil is the weight of soil particles in a given volume of a sample.

Its value depends on the void ratio and the soil’s specific gravity. This value is used to classify soil as dense, medium dense, or loose.

The dry density test is done using one of three methods: sand replacement, core cutter, or water displacement.

Of these, the sand replacement and core cutter methods are the more widely used.

Atterberg Limits Test

This test is done on the fine-grained soil to measure its critical water content.

There are three limits that determine the properties of fine-grained soil under different conditions: liquid limit, plastic limit, and shrinkage limit.

a.     In a liquid limit test, a device called a Casagrande’s liquid limit device, which consists of a cup with a mechanism that moves up and down is used to determine the soil’s liquid limit.

b.    In a plastic limit test, water is added to the soil sample to make it plastic. It is then shaped into a ball, which is put into a glass plate and rolled into threads that are 3 millimeters in diameter. If the threads do not break, then the procedure is repeated with a new sample and less water. It goes on until the thread breaks. That is the plastic limit of the soil.

c.     In a shrinkage limit test, a mathematical formula is used to determine the water content that is just enough to fill the voids of the soil.

Proctor’s Compaction Test

This test is conducted to find out the compaction characteristics of the soil.

The soil sample is air dried and then divided into four to six smaller samples. Their water content is adjusted by adding 3 percent to 5 percent water.

The samples are then placed in the Proctor compaction mold in three different layers. Each layer is then given 25 blows from a standard 5.5-pound hammer.

The samples are removed and dried, and their dry density and water content are determined.

A curve is then plotted based on the entire set of results – with the density as a function of water content.

This curve gives an accurate picture of the optimum water content needed to reach the maximum dry density.

When taking samples, remember a soil test is only as good as the sample you take.

Therefore it is important to hire a professional highly experienced environmental company to handle your soil testing for construction.

One that specializes in groundwater and soil testing, investigation, assessment, and remediation.

All American Environmental is that company! We are located in Lake Hopatcong, NJ and provide complete soil testing for construction services throughout northern NJ. Contact All American Environmental, NJ

All American Environmental is a New Jersey based full service environmental consulting and contracting company. We provide environmental walk-thru, sub-surface evaluation, soil sampling and analysis, asbestos remediation, and oil tank replacements. We are fully licensed and insured in the State of New Jersey and have performed over 12,000 tank replacements in the past 20 years. All work is performed under local, state and federal regulations. We provide professional service for both residential and commercial clients.

https://allamericanenviro.com/5-types-of-soil-testing-for-construction/


You might also like:


Soil Aggregates

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/10/blog-post_5.html

..........................................................................................................................................................................................................................................................................................

Common Types of Soil

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/06/common-types-of-soil-gravel-course.html

..........................................................................................................................................................................................................................................................................................

Types of Aggregates

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/05/aggregates-aggregates-are-coarse.html

..........................................................................................................................................................................................................................................................................................

Functions Of Pile Foundation

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/06/functions-of-pile-foundation-why-piles.html

..........................................................................................................................................................................................................................................................................................

Plumb Line

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2020/11/plumb-line-plumb-line-applies-law-of.html

.......................................................................................................................................................................................................

Our Foundation

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2020/07/our-foundation-there-shall-be-no-force.html 


Tuesday, November 10, 2020

WORLD'S FIRST CARBON-FIBER REINFORCED CONCRETE BUILDING – Carbon-fiber reinforced concrete is a composite product that consists of carbon fiber — which provides strength and stiffness and polymers — which hold the fibers together in a kind of matrix. The micro or macrofibers can be either synthetic or natural. The consensus within the industry is that this kind of reinforcement can significantly increase the life of the structure in which the composite is used. The carbon fiber being deployed for CUBE is produced from petroleum-based polyacrylonitrile, or PAN. It can also be made from lignin, an organic polymer derived from waste material in paper production. TU Munich has been exploring the production of carbon fiber from algae oil. A two-story building locally named Carbonhaus on the campus of Technical University in Dresden, Germany is under construction which will be the first building in the world built entirely on Carbon Reinforced Concrete. The building has a covered area of 2200 Square feet and will be completed with a budget of 5 Million Euros (US$5.63 million). The building consists of two major portions: a precast “box”; and the “twist,” a double-curved roof that is made up of the lighter-weight and bendable reinforced concrete. This building will house a classroom, lab, presentation spaces, and a small kitchen. The biggest attraction as well as the engineering marvel of this will be its curved roof as well as 24-meter length of seamless concrete.

A curved roof and one wall that is 24 meters of seamless concrete are two characteristics of Carbonhaus

.........................................................................................................................................................................................................................................................................................................

World's First Carbon-Fiber Reinforced Concrete

By: Haseeb Jamal

 

A two-story building locally named Carbonhaus on the campus of Technical University in Dresden, Germany is under construction which will be the first building in the world built entirely on Carbon Reinforced Concrete.

The building has a covered area of 2200 Square feet and will be completed with a budget of 5 Million Euros (US$5.63 million).

The building consists of two major portions: a precast “box”; and the “twist,” a double-curved roof that is made up of the lighter-weight and bendable reinforced concrete.

This university building will house a classroom, lab, presentation spaces, and a small kitchen.

The biggest attraction as well as the engineering marvel of this will be its curved roof as well as 24-meter length of seamless concrete.

The design architect of Carbonhaus is Gunter Henn, chairman of Munich-based architecture firm HENN.

The project is engineered by Architeckten Ingenieure Batzen (AIB), whereas Assmann Advice + Plan is providing structural planning services.

Manfred Curbach, director of the Institute of Concrete Construction at TU Dresden, where he is a professor, said "When we started publishing the first results on carbon reinforced concrete at that time, we were smiled at. It is nonsense. The topic will be off the table in three years".

That was in 1998. Now 22 years later, despite the difficult current situation, the world's first building made entirely of carbon reinforced concrete is being built on the campus of the TU Dresden.

"It is a quantum leap in the history of civil engineering" he added.

The reinforced concrete is named as Carbon Concrete Composite and named as C3 or Cube..

What is Carbon-Fiber Reinforced Concrete?

Carbon-fiber reinforced concrete is a composite product that consists of carbon fiber — which provides strength and stiffness and polymers — which hold the fibers together in a kind of matrix. The micro or macrofibers can be either synthetic or natural.

The consensus within the industry is that this kind of reinforcement can significantly increase the life of the structure in which the composite is used.

The carbon fiber being deployed for CUBE is produced from petroleum-based polyacrylonitrile, or PAN.

It can also be made from lignin, an organic polymer derived from waste material in paper production.

TU Munich has been exploring the production of carbon fiber from algae oil.

Importance & Applications of Carbon-Fiber Reinforced Concrete

It offers more durability and is better for the environment than the standard mix of building materials.

The carbon-reinforced material provides more resistance to cracking and erosion than conventional steel and concrete building components.

The use of the new alternative, however, still faces some regulatory and economic hurdles.

As at least half of the concrete in a typical building component is used to protect the steel reinforcement from corrosion.

Hence, as much as 60% of a concrete structure is dead weight of the structure which the concrete and reinforcement has to support, increasing the cost of the structure.

Experts say that because steel and concrete “work in tandem, but not together,” the resulting component continues to be prone to cracking and erosion, to the point where buildings and infrastructure don’t last anywhere near as long as they should.

“They are designed for strength, but not durability, and no one is accountable after 10 years of service.”

On the other hand, the weight of carbon reinforcement materials is about one-quarter that of steel, with the same tensile strength.

The composite component is more durable and saves up to 70% in greenhouse gas emissions.

Though it could take 20 years to get mainstream and would require regulations but once in effect it would help accelerate the decline of CO2.

Carbon concrete can, however, not only be used in the strengthening or refurbishment of bridges or structures.

It paves the way for the construction industry to develop an entirely new way of building and living.

Carbon concrete enables the interior walls of buildings to consist of panels only a few centimeters thick, thus providing new design possibilities that are characterized by slenderness, lightness and esthetic principles.

Potential applications thus extend across the entire spectrum of construction engineering – whether refurbishment or new construction.

https://youtu.be/nB9ViglDMmg

Haseeb Jamal. I am a Civil Engineer, graduated from University of Engineering and Technology, Peshawar, Pakistan in 2010. I also have a PG-Diploma in Disaster Management and MS in Urban Infrastructure Engineering (In Progress). My expertise include civil related softwares like AutoCAD, SAP2000, MS Project, Primavera, MS Office and GIS. My technical skills include project management, monitoring and evaluation, structural assessment, disaster risk management, Quantity survey, land survey, material testing, site management and technical writing. I am trained in writing project progress reports as well as proposals and concept papers. I have also received advanced training on surveying, proposal writing, Monitoring and Evaluation of projects as well as organizations.

I have worked as Project Engineer at National Research and Development Foundation, Peshawar and CENCON Associates. I also worked with Spectra Engineering Solutions as Senior Civil Engineer in monitoring of World Bank and UNDP funded projects all over Khyber Pakhtunkhwa and FATA. Currently, I am working as Deputy Manager Development at NayaTel, Peshawar.

https://www.aboutcivil.org/carbon-reinforced-concrete-building-cube


You might also like:


Carbon Fiber

Lightweight Composite Material

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/09/carbon-fiber-lightweight-composite.html

.......................................................................................................................................................................................................................................................................................

Carbon Fiber Applications

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/06/carbon-fiber-applications-carbon-fiber.html

.......................................................................................................................................................................................................................................................................................

Composites And Carbon Fiber In The Dreamliner

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/03/composites-and-carbon-fiber-in.html

.......................................................................................................................................................................................................................................................................................

Bamboo Fiber Composite

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/12/bamboo-fiber-composite-could-bamboo.html

.......................................................................................................................................................................................................................................................................................

Graphene and Water 
Treatment

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2017/04/graphene-and-water-treatment-graphene.html

.......................................................................................................................................................................................................................................................................................

Carbon Fiber Laminates

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/04/using-carbon-fiber-laminates-carbon.html

Thursday, October 1, 2020

ROOFING SYSTEMS - When we say "roof", we mean a sloped cover to a building, made of any material, and we do NOT mean a flat concrete slab that can be used by humans. Let’s start with a well-kept secret, one that will give you an instant instinctive grasp of how the range of roofing solution works: "the slope of the roof is a clear indicator of how hi-tech the roof is. A very low slope will mean a hi-tech roof, and a high slope a low-tech roof." To understand this principle, let us start with one of the most low-tech roofing systems: a thatch roof. Thatch roofs in most countries will have a slope of 45 degrees or so. This is because they are not very watertight. However, they are rather thick, most often 400mm (16") or so. So the high slope forces the water to run off before it penetrates through the thickness of the thatch, a low-tech solution. On the other hand, a state of the art system such as low-slope "kliplock" corrugated metal sheeting can be installed at slopes of 1 degree or less, as it is perfectly watertight. Apart from being watertight, a roof must perform other functions: it must support snow, must look attractive, must have a permanent abrasion-resistant finish, must not absorb heat in hot climates, and must not lose heat in cold climates. Clay tiles are a traditional kind of roofing material. Wooden shingles are light and easily replaceable, and were used extensively in many parts of the world.

................................................................................................................................................

Roofing 

Systems

understandconstruction.com

 

 

In this article, when we say "roof", we mean a sloped cover to a building, made of any material, and we do NOT mean a flat concrete slab that can be used by humans.

Let’s start with a well-kept secret, one that will give you an instant instinctive grasp of how the range of roofing solution works:

"the slope of the roof is a clear indicator of how hi-tech the roof is.  A very low slope will mean a hi-tech roof, and a high slope a low-tech roof."

To understand this principle, let us start with one of the most low-tech roofing systems: a thatch roof.  

Thatch roofs in most countries will have a slope of 45 degrees or so. This is because they are not very watertight.  

However, they are rather thick, most often 400mm (16") or so. So the high slope forces the water to run off before it penetrates through the thickness of the thatch, a low-tech solution.

On the other hand, a state of the art system such as low-slope "kliplock" corrugated metal sheeting can be installed at slopes of 1 degree or less, as it is perfectly watertight.

Take a look at the image below, which shows the correct slopes for a range of roofing systems, to understand this in greater detail.

Apart from being watertight, a roof must perform other functions: it must support snow, must look attractive, must have a permanent abrasion-resistant finish, must not absorb heat in hot climates, and must not loose heat in cold climates.  

A roof must be able to withstand the following loads:

·      wind loads, which can be very large in some areas

·      human loads (if the roof is not accessible, it must be able to withstand the weight of maintenance workers)

·      snow loads

·      earthquake

For a number of reasons, the image of a building with a sloped roof has very strong roots in the human psyche - you will even find this on your browser, to denote a "home" page.

TYPES OF ROOFING SYSTEMS

A thatched cottage in England. Note that the ridges of the roof form
 have been given additional layers of thatch protection, and that this
 has been turned into a beautiful decorative element!

Thatch Roofs: are one of the earliest roofing systems created by man, and are still used in millions of structures worldwide.  

Made of dried plant stems, a thatch roof will commonly have a slope of 45 degrees and thickness of 400mm (16").  

This thickness is made up of a number of layers of individual plant fibres.  

When water falls on a thatch roof, it will trickle from layer to layer as gravity pulls it downwards.  

The thickness actually creates sufficient layers for the water drops to move horizontally out of the structure before they fall into a room.  

The steep slope serves to increase the speed of the drops, so that they quickly move out of the structure before falling inside.  

This kind of roof is very different from other roofs, as it does not have a single watertight skin, but has instead a large number of partially waterproof layers.

Slate or Stone Roofs: stone is not the greatest material for roofs, as it is heavy.  

A slate roof being installed over wooden battens.

   Slate is a naturally occurring type of stone that splits into thin layers if you hit it with a chisel in just the right way.  

   This produces thin, waterproof tiles that can be overlapped to form a roof.  

   Since the stone tiles are not exactly the same size and thickness, this is not a system that is highly waterproof.

   Therefore, it needs to have a good slope, of say 20 to 30 degrees, to force the water to run off the roof and not trickle through the gaps.

A traditional southern mediterranean style clay tile roof.

Clay Tile Roofs: clay tiles are a traditional kind of roofing material.

   Clay is a material that is both widely available and easy to shape into forms that have lips and channels to direct the flow of water.

   It is still widely used in many parts of the world, and has an attractive appearance.

Wood Shingle Roofs: wooden shingles are light and easily replaceable, and were used extensively in many parts of the world.

   Corrugated metal roof sheeting is inexpensive and quick to install.

   It works best for the very large roofs of factories, stadiums, and airports, but can also be used in any type of building, including houses.

Corrugated metal roof sheeting is inexpensive and quick to install.
 It works best for the very large roofs of factories, stadiums, and airports,
but can also be used in any type of building, including houses.
Metal Roofing Systems: metal roofing systems are hugely popular in today's times.

They are used in almost every industrial and airport terminal building and can also be used in residential and educational buildings.

They make for an extremely light, strong, economical, and waterproof roof, and come in a very wide range of varieties.

Commonly used metals are mild steel, aluminum, and stainless steel.

Steel roofing sheets need to be protected from corrosion, and are usually galvanized or coated with other protective layers.

The sheets are quite thin, as much as 0.5mm in the case of steel, and 1mm in aluminum.

They therefore require insulation and other layers to be incorporated into the roof.

Asphalt Shingle Roofing: this is a modern, "man-made" solution.

   Asphalt shingles are actually thin rubber-like sheets that are cut to look like clay or stone shingles.

   They are usually stuck onto the under-surface with an adhesive, or with hot bitumen.

Learn everything about building construction

This a site that explains the art and science of building construction in great clarity and detail.  Our goal is to make you understand concepts in building construction.
Written by architects and engineers, the content on the site is actually a result of accumulated years of work experience at building construction sites and design offices.  This expert knowledge of building construction is not available in textbooks!
We also take great pains to ensure that our quality of writing is of a high standard.  We aim to take complicated situations and make them simple and clear, as well as to provide content that is interesting to industry experts and newcomers alike.  Do let us know where we succeed - and where we fail - in this task.

http://www.understandconstruction.com/roofing-systems.html


You might also like:

Dormer Windows

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/12/dormer-windows-dormers-have-always-been.html

.....................................................................................................................................................................................................................................................................................

Insulations

Keeping Your House Warm

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2018/11/insulation-materials-house-must-have.html

.....................................................................................................................................................................................................................................................................................

Asbestos In Your Home

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/09/asbestos-in-your-home-many-compound.html

.....................................................................................................................................................................................................................................................................................

Safety Procedures at Construction Site 

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/02/safety-procedures-at-construction-site.html

.....................................................................................................................................................................................................................................................................................

Jacketing and Collars for Strengthening of Concrete Structures

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/03/jacketing-and-collars-for-strengthening.html

.....................................................................................................................................................................................................................................................................................

Robotic Building Construction 

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/08/robotic-building-construction-robotic.html