Showing posts with label Concrete. Show all posts
Showing posts with label Concrete. Show all posts

Monday, December 21, 2020

BAMBOO FIBER COMPOSITE - Could a bamboo fiber composite replace steel reinforcements in concrete? Bamboo has been used in a variety of construction applications to varying degrees of success, but a new bamboo fiber composite may be the perfect sustainable replacement for steel reinforcements in concrete. Steel has long played an important role in growing and vibrant world economies. Bamboo is Mother Nature’s magic material — sustainable, resilient, and oh-so-abundant in many developing countries. More than a snack for our furry friends, it has been used in a variety of applications in construction — everything from suspension bridges and scaffolding to small (and not-so-small) homes. Bamboo is strong, almost as strong as steel. It’s also pretty effective at curbing carbon emissions, which makes it an even better and sustainable building material. What makes it not so ideal is that bamboo, if left untreated, can swell with water and rot. As a result, it hasn’t been used to reinforce concrete with much success — at least, not until now. Led by Dirk Hebel, the research team at Future Cities has developed a bamboo fiber composite that has, thus far, showed great promise as a replacement for steel reinforcements. According to a Civil Engineering Magazine article, the composite — 80 percent bamboo, 20 percent adhesive, and 300 percent more dense than raw bamboo — is “water resistant, does not swell, and is durable.”

Bamboo has been used in a variety of construction applications to varying degrees of success, but a new bamboo fiber composite may be the perfect sustainable replacement for steel reinforcements in concrete.
..........................................................................................................................................................................................................................................................................................................

Bamboo reinforced concrete

Bamboo Fiber Composite

Could a bamboo fiber composite replace steel reinforcements in concrete?

JESSICA MCMATHIS

The American Ceramic Society

 

Steel has long played an important role in growing and vibrant world economies.

I know this not because global economic statistics tell me so, but because I hail from Pennsylvania, just a few hours north of Pittsburgh, where steel was once more than just an industry—it was a way of life.

Steel City in the 1940s

At the turn of the 20th century, 37 percent of the world’s steel was produced in the U.S. — with Pittsburgh’s steel mills accounting for 60 percent of what was produced nationally by 1910.

But by the end of the century, steel production in the States, particularly in Pittsburgh, had slowed.

Three-quarters of the city’s steel operations had closed up shop in the late 1980s, forcing the Steel City to reinvent itself, which it has, to great success. (Need proof? See it for yourself at MS&T14, October 12–16.)

In 2013, America ranked fifth in overall steel production, generating some 87 million metric tons  — far below the 779 million metric tons produced by world leader China.

The production and consumption of steel has been critical in shoring up the economies of China and other developing countries — Brazil, India, and South Korea among them — but these countries are not always capable of producing a supply that can meet an increasingly growing demand.

Enter scientists at Singapore’s Future Cities Laboratory (ETH Zürich’s research lab), who offer bamboo, a natural — and unnaturally strong — wood, as a replacement in places where steel isn’t so plentiful.

Bamboo scaffolding on a Hong Kong building

Bamboo is Mother Nature’s magic material — sustainable, resilient, and oh-so-abundant in many developing countries.

More than a snack for our furry friends, it has been used in a variety of applications in construction — everything from suspension bridges and scaffolding to small (and not-so-small) homes.

Bamboo is strong, almost as strong as steel. It’s also pretty effective at curbing carbon emissions, which makes it an even better and sustainable building material.

What makes it not so ideal is that bamboo, if left untreated, can swell with water and rot. As a result, it hasn’t been used to reinforce concrete with much success — at least, not until now.

Led by Dirk Hebel, the research team at Future Cities has developed a bamboo fiber composite that has, thus far, showed great promise as a replacement for steel reinforcements.

Bamboo reinforced concrete

According to a Civil Engineering Magazine (CE) article, the composite — 80 percent bamboo, 20 percent adhesive, and 300 percent more dense than raw bamboo — is “water resistant, does not swell, and is durable.”

Further, researchers say that testing of its pliancy and tensile strength show that the composite would be a viable replacement for a steel reinforcement.

“To reintroduce production into cities as part of a complex social and cultural lifestyle, it requires that this production — and the products themselves — do not harm our health or environment,” Hebel says in the CE article.

“Renewable and ‘green’ materials like the one we are researching, which do not require a ‘smoke industry,’ but rather a low-tech approach, could be the game-changers whereby small and middle-sized companies can operate as part of an urban system. Wherever bamboo is growing, this process could work out.”

The team will continue to test the bamboo fiber and how it interacts with other materials. They hope to begin pilot testing within the next two years.

The American Ceramic Society

Since 1898, ACerS has been the hub of the global ceramics community and one of the most trusted sources of ceramic materials & applications knowledge. If ceramics and glass technologies are a significant part of your work, then ACerS is the professional society for you.

Who We Are

The mission of ACerS is to advance the study, understanding, and use of ceramics and related materials, for the benefit of our members and society. More than 11,000 scientists, engineers, researchers, manufacturers, plant personnel, educators, students, marketing and sales professionals from more than 70 countries make up the members of The American Ceramic Society.

https://ceramics.org/ceramic-tech-today/biomaterials/could-a-bamboo-fiber-composite-replace-steel-reinforcements-in-concrete


You might also like:



Composites And Carbon Fiber In The Dreamliner

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/03/composites-and-carbon-fiber-in.html

............................................................................................................................................................................................................................................................................................

Fiberglass 

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/02/fiberglass-fiberglass-is-made-of-glass.html

............................................................................................................................................................................................................................................................................................ 

Carbon Fiber Cloth

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/02/carbon-fiber-cloth-when-carbon-is.html

............................................................................................................................................................................................................................................................................................ 

Composite Materials in Airplanes

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/03/composite-materials-in-airplanes-weight.html

.............................................................................................................................................................................................................................................................................................

Aircrafts And Composite Materials

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/02/aircrafts-and-composite-materials.html

............................................................................................................................................................................................................................................................................................ 

Nanoparticles

CLICK HERE . . . to view . . . 

https://puricarechronicles.blogspot.com/2017/12/nanoparticles-nanoparticles-are.html

Sunday, December 6, 2020

AGGREGATES - Aggregates are coarse particulate rock-like material consisting of a collection of particles ranging in size from < 0.1 mm to > 50 mm. It includes gravel, crushed rock, sand, recycled concrete, slag, and synthetic aggregate. Aggregate is a granular material, such as sand, gravel, crushed stone, crushed hydraulic-cement concrete, or iron blast-furnace slag, used with a hydraulic cementing medium to produce either concrete or mortar. Types of aggregates include Coarse aggregate and fine aggregate. The aggregate of each type is further sub-divided into many types and classification based on its size. The technique of Sieve Analysis is used for gradation of aggregate for use in concrete and for other applications. Aggregate is called bound material when it is mixed with cement or binding materials and referred to as unbound material when used without cement or binding materials. Aggregates are commonly obtained by crushing naturally occurring rock. The properties of aggregates depend on the parent rock which can be igneous, sedimentary, or metamorphic. Aggregates are evaluated through tests to determine their suitability for various applications. Mineralogy, grain size and texture, and petrographic description of rock samples are also used to evaluate suitability. Coarse-grained aggregates will not pass through a sieve with 4.75 mm openings (No. 4).

..........................................................................................................................................................................................................................................................................................................

Aggregates

By: Haseeb Jamal


 

Aggregates Definition:

Aggregates are coarse particulate rock-like material consisting of a collection of particles ranging in size from < 0.1 mm to > 50 mm.

It includes gravel, crushed rock, sand, recycled concrete, slag, and synthetic aggregate.

Aggregate is a granular material, such as sand, gravel, crushed stone, crushed hydraulic-cement concrete, or iron blast-furnace slag, used with a hydraulic cementing medium to produce either concrete or mortar.

Types of aggregates include Coarse aggregate and fine aggregate.

The aggregate of each type is further sub-divided into many types and classification based on its size.

The technique of Sieve Analysis is used for gradation of aggregate for use in concrete and for other applications.

Aggregate is called bound material when it is mixed with cement or binding materials and referred to as unbound material when used without cement or binding materials.

Aggregate Origin and Geology

Aggregates are commonly obtained by crushing naturally occurring rock.

The properties of aggregates depend on the parent rock which can be igneous, sedimentary, or metamorphic.

Aggregates are evaluated through tests to determine their suitability for various applications.

Mineralogy, grain size and texture, and petrographic description of rock samples are also used to evaluate suitability.

Types of Aggregates

Coarse Aggregate

Coarse-grained aggregates will not pass through a sieve with 4.75 mm openings (No. 4).

Those particles that are predominantly retained on the 4.75 mm (No. 4) sieve and will pass through 3 inch screen, are called coarse aggregate. 

The coarser the aggregate, the more economical the mix.

Larger pieces offer less surface area of the particles than an equivalent volume of small pieces.

Use of the largest permissible maximum size of coarse aggregate permits a reduction in cement and water requirements.

Using aggregates larger than the maximum size of coarse aggregates permitted can result in interlock and form arches or obstructions within a concrete form.

That allows the area below to become a void, or at best, to become filled with finer particles of sand and cement only and results in a weakened area.

For Coarse Aggregates in Roads following properties are desirable:

1.        Strength

2.        Hardness

3.        Toughness

4.        Durability

5.        Shape of aggregates

6.        Adhesion with bitumen

Fine Aggregate

The other type of aggregates are those particles passing the 9.5 mm (3/8 in.) sieve, almost entirely passing the 4.75 mm (No. 4) sieve, and predominantly retained on the 75 µm (No. 200) sieve are called fine aggregate.

For increased workability and for economy as reflected by use of less cement, the fine aggregate should have a rounded shape.

The purpose of the fine aggregate is to fill the voids in the coarse aggregate and to act as a workability agent.

Properties of Aggregates also has effect on resulting concrete. e.g. variation in size, grading, texture, shape and strength of aggregates means variation in the properties of resulting concrete. 

Purpose & Uses of Aggregates

In concrete, an aggregate is used for its economy factor, to reduce any cracks and most importantly to provide strength to the structure.

1.    Aggregates are used as the base, subbase, and/or surface of roads in several forms

2.    In roads and railway ballast, it is used to help distribute the load and assist in ground water running off the road.

3.    Increases the volume of concrete, thus reduces the cost. Aggregates account for 60-75% of the volume of concrete and 79-85% weight of PCC

4.    Provide dimensional stability

5.    Influence hardness, abrasion resistance, elastic modulus and other properties of concrete to make it more durable, strong and cheaper.

6.    Other uses include fills, backfills, and drainage and filtration applications.

Haseeb Jamal

I am a Civil Engineer, graduated from University of Engineering and Technology, Peshawar, Pakistan in 2010. I also have a PG-Diploma in Disaster Management and MS in Urban Infrastructure Engineering (In Progress). My expertise include civil related softwares like AutoCAD, SAP2000, MS Project, Primavera, MS Office and GIS. My technical skills include project management, monitoring and evaluation, structural assessment, disaster risk management, Quantity survey, land survey, material testing, site management and technical writing. I am trained in writing project progress reports as well as proposals and concept papers. I have also received advanced training on surveying, proposal writing, Monitoring and Evaluation of projects as well as organizations.

I have worked as Project Engineer at National Research and Development Foundation, Peshawar and CENCON Associates. I also worked with Spectra Engineering Solutions as Senior Civil Engineer in monitoring of World Bank and UNDP funded projects all over Khyber Pakhtunkhwa and FATA. Currently, I am working as Deputy Manager Development at NayaTel, Peshawar.

https://www.aboutcivil.org/aggregates-types-uses-definition.html
















Wednesday, April 8, 2020

MAIN PROPERTIES OF CONCRETE FOR CONSTRUCTION - Concrete is a mixture of several materials. At the hardened state, this heterogeneous material becomes stone-like mass. Concrete attains strength with time. Ordinary cement concrete gains above 70 to 75% of its final strength within 28 days and about 90 to 95 % in the course of one year. It is often desirable to check the suitability of a concrete long before the results of the 28-day test are available. When no specific data on the materials used in making concrete are available, the 28-day strength may be assumed to be 1.5 times of the 7 days’ strength. Tests have shown that for concrete made with ordinary Portland cement the ratio of the 28 days to 7 days’ strength generally lies between 1.3 to 1.7, and the majority of the results fall above 1.5. Concrete is very weak in tension. The tensile strength of ordinary concrete ranges from about 7 to 10 percent of the compressive strength. The flexural strength of plain concrete is almost wholly dependent upon the tensile strength. The strength of concrete of a given mix proportion is very seriously affected by the degree of its compaction. It is therefore vital that the consistency of the mix be such that the concrete can be transported, placed and finished sufficiently easily and without segregation.

cube and cylinder specimens
Cube and Cylinder Specimens for Compression Strength Testing
.................................................................................................................................................................
concreteMain Properties of Concrete for Construction
Tahsina Alam



Concrete is a mixture of several materials.
At the hardened state, this heterogeneous material becomes stone-like mass.
The extensive use of concrete in the construction field has made it a material of huge concern for engineers.
To participate in the vast uses of concrete an engineer must know its properties. Here in this article, we have provided a glimpse of the properties of concrete.
Strength
Strength of concrete are of the following types:
a.      Compressive strength
b.     Tensile strength
c.      Flexural strength
d.     Shear strength
Compressive Strength
Two types of test specimens are used in Bangladesh
(1) Cube and
(2) Cylinder
The cube specimens of concrete of the desired proportion are cast in steel or cast iron molds, normally 6-inch cube.
The standard cylinder specimen of concrete is 6 inch in diameter and 12 inches in height and cast in a mold generally made of cast iron;
Standard cubes and cylinders are tested at prescribed ages, generally, 28 days, with additional tests often made at 1, 3, and 7 days.
The specimens are tested for crushing strength under a testing machine.
The cube tests give much greater values of crushing strength, usually 20 to 30 % more than those given by cylinders.
According to British standard, the strength of a cylinder specimen is equal to three-quarters of the strength of the cube specimen.
Effect of age on concrete strength:
Concrete attains strength with time. Ordinary cement concrete gains above 70 to 75% of its final strength within 28 days and about 90 to 95 % in the course of one year.
It is often desirable to check the suitability of a concrete long before the results of the 28-day test are available.
When no specific data on the materials used in making concrete are available, the 28-day strength may be assumed to be 1.5 times of the 7 days’ strength.
Tests have shown that for concrete made with ordinary Portland cement the ratio of the 28 days to 7 days’ strength generally lies between 1.3 to 1.7, and the majority of the results fall above 1.5.
The extrapolation of 28 days’ strength from the 7 days’ strength is, therefore quite reliable;
The rate of gain of strength of the different type of cement concretes are shown in the figure below
rate of gain of concrete strength
Tensile strength
Concrete is very weak in tension. The tensile strength of ordinary concrete ranges from about 7 to 10 percent of the compressive strength.
Flexural strength
The flexural strength of plain concrete is almost wholly dependent upon the tensile strength.
However, experiments show that the modulus of rupture is considerably greater than the strength in tension.
Shear strength
It is the real determining factor in the compressive strength of short columns.
The average strength of concrete in direct shear varies from about half of the compressive strength for rich mixtures to about 0.8 of the compressive strength for lean mixtures.
Workability
The strength of concrete of a given mix proportion is very seriously affected by the degree of its compaction.
It is therefore vital that the consistency of the mix be such that the concrete can be transported, placed and finished sufficiently easily and without segregation.
A concrete satisfying these conditions is said to be workable.
Factors affecting the workability of concrete are:
·       Water Content
·       Mix Proportions
·       Size of Aggregates
·       Shape of Aggregates
·       Grading of Aggregates
·       Surface Texture of Aggregates
·       Use of Admixtures
·       Use of Supplementary Cementitious Materials
·       Time
·       Temperature
Usually, Slump test is done to indirectly determine the workability of a concrete mix.
Elastic Properties
Concrete is not perfectly elastic for any range of loading, an appreciable permanent setting taking place for even low loads.
The deformation is not proportional to the stress at any stage of loading.
The elastic properties of concrete vary with the richness of the mixture and with the intensity of the stress. They also vary with the age of concrete.
Durability
Durability is the property of concrete to withstand the condition for which it has been designed, without deterioration over a period of years.
Lack of durability can be caused by external agents arising from the environment or by internal agents within the concrete.
Causes can be categorized as physical, mechanical and chemical.
Physical cause arises from the action of frost and from differences between the thermal properties of aggregate and of the cement paste, while mechanical causes are associated mainly with abortion.
Impermeability
Penetration of concrete by materials in solution may adversely affect its durability, for instance, when Ca(OH)2 is being leached out or an attack by aggressive liquids (acids) takes place.
Permeability has an important bearing on the vulnerability of concrete to water and frost.
In the case of reinforced cement concrete, the penetration of moisture and air will result in the corrosion of steel.
This leads to an increase in the volume of the steel, resulting in cracking and spalling of the concrete. P
ermeability of concrete is also of importance for liquid retaining and hydraulic structures;
Segregation
The tendency of separation of coarse aggregate grains from the concrete mass is called segregation.
It increases when the concrete mixture is lean and too wet.
It also increases when rather large and rough-textured aggregate is used. The phenomenon of segregation can be avoided as follows.
·     Addition of little air-entraining agents in the mix.
·     Restricting the amount of water to the smallest possible amount.
·     All the operations like handling, placing and consolidation must be carefully conducted.
·     Concrete should not be allowed to fall from large heights.
Bleeding
The tendency of water to rise to the surface of freshly laid concrete is known as bleeding.
The water rising to the surface carries with it, particles of sand and cement, which on hardening form a scum layer is popularly known as laitance.
Concrete bleeding can be checked by adopting the following measures.
·     By adding more cement
·     By using more finely ground cement
·     By properly designing the mix and using the minimum quantity of water
·     By using little air entraining agent
·     By increasing the finer part of fine aggregate
Fatigue
Plain concrete when subjected to flexure, exhibits fatigue.
The flexure resisting ability of concrete of a given quality is indicated by an endurance limit whose value depends upon the number of repetitions of stress.
In concrete pavement design, the allowable flexural working stress is limited to 55% of the modulus of rupture.
Tahsina Alam, PE
Senior Engineer at MnDOT
Greater Minneapolis-St. Paul Area
 cube and cylinder specimens