Showing posts with label Geology. Show all posts
Showing posts with label Geology. Show all posts

Tuesday, March 23, 2021

WEATHERING AND EROSION - Rock that is close to the land surface is subject to physical and chemical modification by a number of different weathering processes. These processes generally start with water percolating down into joints formed by stress release as the rock comes close to the surface, and are most intense at the surface and in the soil profile. Weathering is the breakdown and alteration of bedrock by mechanical and chemical processes that create a regolith (layer of loose material), which is then available for transport away from the site. Physical weathering are processes that break the solid rock into pieces and may separate the different minerals without involving any chemical reactions. Water entering cracks in rock expands upon freezing, forcing the cracks to widen; this process is also known as frost shattering and it is extremely effective in areas that regularly fluctuate around 0 degree Celsius, such as high mountains in temperate climates and in polar regions. Seawater or other water containing dissolved salts may also penetrate into cracks, especially in coastal areas. Upon evaporation of the water, salt crystals form and their growth generates localised, but significant, forces that can further open cracks in the rock. Changes in temperature probably play a role in the physical breakdown of rock. Rapid changes in temperature occur in some desert areas where the temperature can fluctuate by several tens of degrees Celsius between day and night.

................................................................................................................................................................................................................................................................................................................................................................................

Weathering and erosion

By OK


 

Weathering processes

Rock that is close to the land surface is subject to physical and chemical modification by a number of different weathering processes.

These processes generally start with water percolating down into joints formed by stress release as the rock comes close to the surface, and are most intense at the surface and in the soil profile.

Weathering is the breakdown and alteration of bedrock by mechanical and chemical processes that create a regolith (layer of loose material), which is then available for transport away from the site.

Physical weathering

These are processes that break the solid rock into pieces and may separate the different minerals without involving any chemical reactions. The most important agents in this process are as follows.

Freeze-thaw action

Water entering cracks in rock expands upon freezing, forcing the cracks to widen; this process is also known as frost shattering and it is extremely effective in areas that regularly fluctuate around 0 degree Celsius, such as high mountains in temperate climates and in polar regions.

Salt growth

Seawater or other water containing dissolved salts may also penetrate into cracks, especially in coastal areas.

Upon evaporation of the water, salt crystals form and their growth generates localised, but significant, forces that can further open cracks in the rock.

Temperature changes

Changes in temperature probably play a role in the physical breakdown of rock.

Rapid changes in temperature occur in some desert areas where the temperature can fluctuate by several tens of degrees Celsius between day and night; if different minerals expand and contract at differentrates, the internal forces created could cause the rock to split.

This process is referred to as exfoliation, as thin layers break off the surface of the rock.

Chemical weathering

These processes involve changes to the minerals that make up a rock. The reactions that can take place are as follows.

Solution

Most rock-forming silicate minerals have very low solubility in pure water at the temperatures at the Earth’s surface and so most rock types are not susceptible to rapid solution.

It is only under conditions of strongly alkaline waters that silica becomes moderately soluble.

Carbonate minerals are moderately soluble, especially if the groundwater (water passing through bedrock close to the surface) is acidic.

Most soluble are evaporite minerals such as halite (sodium chloride) and gypsum, which locally can form an important component of sedimentary bedrock.

Hydrolysis

Hydrolysis reactions depend upon the dissociation of H2O into H+ and OH ions that occurs when there is an acidifying agent present.

Natural acids that are important in promoting hydrolysis include carbonic acid (formed by the solution of carbon dioxide in water) and humic acids, a range of acids formed by the bacterial breakdown of organic matter in soils.

Many silicates undergo hydrolysis reactions, for example the formation of kaolinite (a clay mineral) from orthoclase (a feldspar) by reaction with water.

Oxidation

The most widespread evidence of oxidation is the formation of iron oxides and hydroxides from minerals containing iron.

The distinctive red-orange rust colour of ferric iron oxides may be seen in many rocks exposed at the surface, even though the amount of iron present may be very small.

The products of weathering

Material produced by weathering and erosion of material exposed on continental landmasses is referred to as terrigenous (meaning derived from land).

Weathered material on the surface is an important component of the regolith that occurs on top of the bedrock in most places.

Terrigenous clastic detritus comprises minerals weathered out of bedrock, lithic fragments and new minerals formed by weathering processes.

Rock-forming minerals can be categorised in terms of their stability in the surface environment.

Stable minerals such as quartz are relatively unaffected by chemical weathering processes and physical weathering simply separates the quartz crystals from each other and from other minerals in the rock.

Micas and orthoclase feldspars are relatively resistant to these processes, whereas plagioclase feldspars, amphiboles, pyroxenes and olivines all react very readily under surface conditions and are only rarely carried away from the site of weathering in an unaltered state.

The most important products of the chemical weathering of silicates are clay minerals.

A wide range of clay minerals form as a result of the breakdown of different bedrock minerals under different chemical conditions; the most common are kaolinite, illite, chlorite and montmorillonite.

Oxides of aluminium (bauxite) and iron (mainly haematite) also form under conditions of extreme chemical weathering.

In places where chemical weathering is subdued, lithic fragments may form an important component of the detritus generated by physical processes.

The nature of these fragments will directly reflect the bedrock type and can include any lithology found at the Earth’s surface.

Some lithologies do not last very long as fragments: rocks made of evaporite minerals are readily dissolved and other lithologies are very fragile making them susceptible to break-up.

Detritus composed of basaltic lithic fragments can form around volcanoes and broken up limestone can make up an important clastic component of some shallow marine environments.

Soil development

Soil formation is an important stage in the transformation of bedrock and regolith into detritus available for transport and deposition.

In situ (in place) physical and chemical weathering of bedrock creates a soil that may be further modified by biogenic processes.

The roots of plants penetrating into bedrock can enhance break-up of the underlying rock and the accumulation of vegetation (humus) leads to a change in the chemistry of the surface waters as humic acids form.

Soil profiles become thicker through time as bedrock is broken up and organic matter accumulates, but a soil is also subject to erosion.

Movement under gravity and by the action of flowing water may remove part or all of a soil profile.

These erosion processes may be acute on slopes and important on flatter-lying ground where gullying may occur. The soil becomes disaggregated and contributes detritus to rivers.

In temperate and humid tropical environments most of the sediment carried in rivers is likely to have been part of a soil profile at some stage.

Continental depositional environments are also sites of soil formation, especially the floodplains of rivers. These soils may become buried by overlying layers of sediment and are preserved in the stratigraphic record as fossil soils.

Erosion and transport

Weathering is the in situ breakdown of bedrock and erosion is the removal of regolith material.

Loose material on the land surface may be transported downslope under gravity, it may be washed by water, blown away by wind, scoured by ice or moved by a combination of these processes.

Falls, slides and slumps are responsible for moving vast quantities of material downslope in mountain areas but they do not move detritus very far, only down to the floor of the valleys.

The transport of detritus over greater distances normally involves water, although ice and wind also play an important role in some environments.

Erosion and transport under gravity

On steep slopes in mountainous areas and along cliffs movements downslope under gravity are commonly the first stages in the erosion and transport of weathered material.

Downslope movement

There is a spectrum of processes of movement of material downslope. A landslide is a coherent mass of bedrock that has moved downslope without significantly breaking up in the process.

Many thousands of cubic metres of rock can be translated downhill retaining the internal structure and stratigraphy of the unit.

If the rock breaks up during its movement it is a rock fall, which accumulates as a chaotic mass of material at the base of the slope.

These movements of material under gravity alone may be triggered by an earthquake, by undercutting at the base of the slope, or by other mechanisms, such as water logging of a potentially unstable slope by a heavy rainfall.

Movement downslope may also occur when the regolith is lubricated by water and there is soil creep.

This is a much slower process than falls and slides and may not be perceptible unless a hillside is monitored over a number of years.

A process that may be considered to be intermediate between creep movement and slides is slumping.

Slumps are instantaneous events like slides but the material is plastic due to saturation by water and it deforms during movement downslope.

With sufficient water a slump may break up into a debris flow.

Scree and talus cones

In mountain areas weathered detritus falls as grains, pebbles and boulders down mountainsides to accumulate near the bottom of the slope.

These accumulations of scree are often reworked by water, ice and wind but sometimes remain preserved as talus cones, i.e. concentrations of debris at the base of gullies.

These deposits are characteristically made up of angular to very angular clasts because transport distances are very short, typically only a few hundred metres, so there is little opportunity for the edges of the clasts to become abraded.

A small amount of sorting and stratification may result from percolating water flushing smaller particles down through the pile of sediment, but generally scree deposits are poorly sorted and crudely stratified.

Bedding is therefore difficult to see in talus deposits but where it can be seen the layers are close to the angle of rest of loose aggregate material.

Talus deposits are distinct from alluvial fans because water does not play a role in the transport and deposition.

Erosion and transport by water

Erosion by water on hillsides is initially as a sheet wash, i.e. unconfined surface run-off down a slope following rain.

This overground flow may pick up loose debris from the surface and erode the regolith.

The quantity of water involved and its carrying capacity depends not only on the amount of rainfall but also the characteristics of the surface: water runs faster down a steep slope, vegetation tends to reduce flow and trap debris and a porous substrate results in infiltration of the surface water.

Surface run-off is therefore most effective at carrying detritus during flash-flood events on steep, impermeable slopes in sparsely vegetated arid regions.

Vegetation cover and thicker, permeable soils in temperate and tropical climates tend to reduce the transport capacity of surface run-off.

Sheet wash becomes concentrated into rills and gullies that confine the flow and as these gullies coalesce into channels the headwaters of streams and rivers are established.

Rivers erode into regolith and bedrock as the turbulent flow scours at the floor and margins of the channel, weakening them until pieces fall off into the stream.

Flow over soluble bedrock such as limestone also gradually removes material in solution.

Eroded material may be carried away in the stream flow as bedload, in suspension, or in solution; the confluence of streams forms larger rivers, which may feed alluvial fans, fluvial environments of deposition, lakes or seas.

Erosion and transport by wind

Winds are the result of atmospheric pressure differences that are partly due to global temperature distributions, and also local variations in pressure due to the temperature of water masses that move with ocean currents, heat absorbed by land masses and cold air over high glaciated mountain regions.

A complex and shifting pattern of regions of high pressure (anticyclones) and low pressure (depressions) regions generates winds all over the surface of the Earth.

Winds experienced at the present day range up to storm force winds of 100 km to hurricanes that are twice that velocity.

Winds are capable of picking up loose clay, silt and sand-sized debris from the land surface.

Wind erosion is most effective where the land surface is not bound by plants and hence it is prevalent where vegetation is sparse, in cold regions, such as near the poles and in high mountains, and dry deserts.

Dry floodplains of rivers, sandy beaches and exposed sand banks in rivers in any climate setting may also be susceptible to wind erosion.

Eroded fine material (up to sand grade) can be carried over distances of hundreds or thousands of kilometres by the wind. The size of material carried is related to the strength (velocity) of the air current.

Erosion and transport by ice

Glaciers in temperate mountain regions make a very significant contribution to the erosion and transport of bedrock and regolith.

The rate of erosion is between two and ten times greater in glaciated mountain areas than in comparable unglaciated regions.

In contrast, glaciers and ice sheets in polar regions tend to inhibit the erosion of material because the ice is frozen to the bedrock: movement of the ice in these polar ‘cold-based’ glaciers is mainly by shearing within the ice body.

In temperate (warm based) glaciers, erosion of the bedrock by ice occurs by two processes, abrasion and plucking.

Glacial abrasion occurs by the frictional action of blocks of material embedded in the ice (‘tools’) on the bedrock.

These tools cut grooves, glacial striae, in the bedrock a few millimetres deep and elongate parallel to the direction of ice movement: striae can hence be used to determine the pathways of ice flow long after the ice has melted.

The scouring process creates rock flour, clay and silt-sized debris that is incorporated into the ice.

Glacial plucking is most common where a glacier flows over an obstacle. On the up-flow side of the obstacle abrasion occurs but on the down-flow side the ice dislodges blocks that range from centimetres to metres across.

The blocks plucked by the ice and subsequently incorporated into the glacier are often loosened by subglacial freeze-thaw action.

The landforms created by this combination of glacial abrasion and plucking are called roche moutone'e, apparently because they resemble sheep from a (very) great distance.

Learning Geology is a science website and a community of Earth Scientists that shares geology lessons and host live virtual field tours from all around the world.

With our postings we aim to reach to our fellows with broader public regardless of the boundaries. The postings are done in the great interests of the fellow to learn more and more. The reason for writing is to provide an environment where we can give the best knowledge present just to be shared in the field of Earth and space sciences that we present here. Nobody judge anyone so feel free to feedback and let us know what great ideas you have, be a contributor.  

http://geologylearn.blogspot.com/2015/08/weathering-and-erosion.html


You might also like:


Weathering

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/11/weathering-mechanical-weathering.html

.............................................................................................................................................................................................................................................................................................

Chemical Weathering

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/04/chemical-weathering-chemical-weathering.html

...........................................................................................................................................................................

Friday, January 15, 2021

OVER-PUMPING OF UNDERGROUND AQUIFERS - How Over-Pumping of Underground Aquifers Can Cause Land to Sink - Sucking water from aquifers can cause land to compact over time, often lowering it hundreds of feet in elevation. Specifically, in reference to our drinking water, around half of the US population gets their drinking water from either public or private wells. Water wells are used on a massive scale. They suck water from underground aquifers for use in agriculture or for drinking water. Water is, after all, essential to life, but many civilizations have developed in regions of the world that don't have access to sufficient surface freshwater. Issues arise when the amount of water pumped out of the aquifers is greater than the amount of water flowing into the aquifers. When over-pumping occurs, large swaths of soils underground that previously were saturated with water are now left dried out permanently. All the static and dynamic forces from the land and rock above start adding up and eventually that now-dry soil starts compacting down and down. While this may not seem like a big deal on a small scale, what we've seen in California is the dropping of the surface elevation over a period of years, often by hundreds of feet or meters. This dropping of the ground level is an aspect of a principle called land subsidence. Land subsidence can occur when significant portions of groundwater are pumped out or removed from underground rock and soil.

..........................................................................................................................................................................................................................................................................................................................................................................

Over-Pumping of Underground Aquifers

How Over-Pumping of Underground Aquifers Can Cause Land to Sink

Sucking water from aquifers can cause land to compact over time, often lowering it hundreds of feet in elevation.

By Trevor English



If you're reading this, chances are you don't really have to think about where your drinking water is coming from, how your food was grown, or what effects such processes have had on the environment.

Specifically, in reference to our drinking water, around half of the US population gets their drinking water from either public or private wells.

Water wells are used on a massive scale. They suck water from underground aquifers for use in agriculture or for drinking water.

Water is, after all, essential to life, but many civilizations have developed in regions of the world that don't have access to sufficient surface freshwater.

Take, for example, California and much of the southwestern United States. While this region is one of the most densely populated in the country, it also happens to be one of the most water-scarce.

California has a massive agricultural industry too, meaning the state requires a significant amount of water on a daily and seasonal basis.

For the most part, the states' water has historically come from wells drilled that pump out freshwater from confined and unconfined aquifers under the surface.

This is a fairly common practice globally, but issues arise when the amount of water pumped out of the aquifers is greater than the amount of water flowing into the aquifers.

When over-pumping occurs, large swaths of soils underground that previously were saturated with water are now left dried out permanently.

All the static and dynamic forces from the land and rock above start adding up and eventually that now-dry soil starts compacting down and down.

While this may not seem like a big deal on a small scale, what we've seen in California (and other parts of the world too) is the dropping of the surface elevation over a period of years, often by hundreds of feet or meters.

This dropping of the ground level is an aspect of a principle called land subsidence. Let's take a closer look at just what is occurring.

What is land subsidence?

Land subsidence can occur when significant portions of groundwater are pumped out or removed from underground rock and soil.

The previously water-saturated rock and soil, which is now dry, start compressing under the forces of the rock above it.

Land subsidence is a fairly slow process, and is not generally noticeable on a day to day or minute to minute basis, in the way that says, an earthquake would be.

Localized subsidence is also the principle that describes why a sinkhole or a pothole might occur, only in these cases, it's far more localized land subsidence than the kind that would drop an entire region's elevation.

While dropping the surface elevation in a region may not seem like a big deal, it's actually a rather costly one.

In theory, the dropping of the ground level is fine if it occurs evenly everywhere, but that's not the case.

Land subsidence is a highly variable process, based largely on the soil makeup under the surface.

If one area is comprised mainly of soft clay and the other is mainly of silt, the two areas are going to compact at different rates, even if they took up the same volume when saturated with water.

Since soils are made up of different components and have different shapes and sizes of particles, this also means that different soils can take up various amounts of water.

In gardening, this is one reason why you might buy specialty potting soil – to help the soil retain more or less moisture.

In geology, these different absorption rates impact how engineers design building foundations and wells for underground aquifers.

Back to the core principle here, land subsidence is a big issue because it causes the ground level to sink at highly variable and uneven rates.

When structures are present on the surface, the movement can be enough to crack foundations, collapse bridges, crack underground pipes, and otherwise wreak havoc on civil infrastructure.

Humans have a pretty hard time visualizing something that happens over the span of years though, so I find that when learning about land subsidence, the most effective thing you can do is look at pictures that document its effects.

Perhaps one of the most famous is that of the subsidence that occurred in the California Valley over the span of five decades.

As a warning, this image is going to require some scrolling, but it hopefully underscores just how substantial land subsidence can be.

After seeing that, you hopefully have some grasp on just how substantial land subsidence from over-pumping of aquifers can be.

One might next wonder how this can be tracked and prevented.

While we won't go into that too much in this article, the short answer is that governing bodies track the water levels in wells across a region to monitor whether there is more or less water.

If signs of overpumping are starting to be seen, engineers can either keep pumping and deal with the effects of subsidence, or find another source for water.

The USGS Active Groundwater Level Network includes about 20,000 wells that have
 been measured by the USGS or USGS cooperators at least once within the past 13 months.
The animation shows a daily snapshot of water-level statistics in the network for July 2015,

The gif below is a compilation of USGS well data across the US, indicating water levels in their well network.

This type of data is one of the tools engineers use to figure out how underground water is flowing, refilling, and otherwise behaving.

Engineers will also utilize tools like compaction recording devices to measure the change in sediment layer thicknesses underground.

These tools, rather than measuring water level, allow engineers to measure the soil effects from well pumping in a given area.

The figure below does a pretty good job explaining how this works.

The harmful effects of over-pumping

We've talked a little about how harmful over-pumping can be to buildings and infrastructure, but this isn't the only issue with overpumping, nor have we discussed the full scope of the infrastructure issues that arise.

Land subsidence has many core problems, most of which can be summed up concisely like this – land subsidence can cause:

o  Changes in elevation and slope of streams and surface water systems

o  Damage to infrastructures like roads, bridges, pipes, levees, and sewers

o  Damage to surface buildings

o  Failures of wells

o  The intrusion of chemicals from agriculture

One of these problems is a change to naturally occurring geography, three are changes to infrastructure, and the last is the degradation of water quality.

Let's focus on the change to geography first.

If subsidence changes the path or elevation change across a stream, it can increase its flow rate, causing more erosion in a given area, which can make it harder for certain types of fish and plants to survive, and all of this, in turn, could impact the surrounding ecosystem and even human habitation.

Changes in geography from land subsidence can affect coastal regions too. A house once built far away from high tide elevation may suddenly find itself dangerously close to the water.

Keep in mind this effect is completely different from changes in tide levels caused by climate change.

Going back to the initial list of problems, we've already spent a decent amount of time going over how changes to the ground might impact, damage, or destroy surface and subsurface infrastructure, so I'm mostly going to skip over those effects for further explanation.

What is a new topic though, is the discussion of how land subsidence can actually pollute subsurface water.

Specifically, overpumping from wells can cause concentrations in groundwater of pollutants like arsenic to skyrocket.

Arsenic is a naturally-occurring chemical in nature. Over time, arsenic is transported through rivers and deposited into clay.

This has occurred for millions of years and over time, these clay layers get pushed deeper and deeper into the earth's crust.

What has ended up occurring is a large arsenic concentration in deep clay structures, usually far deeper than wells would ever pump.

However, when wells are overpumped and the soil on top is drained of water, the well starts pulling water from the fine clays underneath, which can have high arsenic concentrations, bringing the arsenic along with it.

This increased arsenic concentration can then pollute crops and drinking water.

Even low levels of arsenic, such as 10 milligrams per liter (8.3 pounds per gallon), are harmful and can cause increased rates of cancer, heart disease, and diabetes.

At the end of the day, land subsidence from over-pumping of subsurface aquifers is a major issue in water-starved regions across the world.

It's also an issue that's not easily solved since, first and foremost, societies need water.

It can be very difficult to switch to less water-intensive crops or growing methods, and you can't just tell people not to drink water or grow crops.

Land subsidence is just one of the fascinating issues that civil and environmental engineers work to solve on a daily basis, and it's one that crucial to the future of many regions across the world.

Trevor English

Writer

Trevor is a civil engineer (B.S.) by trade and an accomplished writer with a passion for inspiring everyone with new and exciting technologies. He is also a published children’s book author and the producer for the YouTube channel Concerning Reality.

https://interestingengineering.com/how-over-pumping-of-underground-aquifers-can-cause-land-to-sink


You might also like:


Aquifers

Underground Stores of Freshwater

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2019/12/aquifers-underground-stores-of.html

............................................................................................................................................................................................................................................................................................

The Science of Sinkholes

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2016/06/sinkholes-sinkhole-is-depression-in.html

............................................................................................................................................................................................................................................................................................

Groundwater, Aquifers and Water Movement

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2016/08/groundwater-occurs-in-saturated-soil.html

............................................................................................................................................................................................................................................................................................

Sinkholes In Guimaras

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2016/06/sinkholes-in-guimaras-subsidence-due-to.html

............................................................................................................................................................................................................................................................................................

Saltwater Intrusion

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2021/01/saltwater-intrusion-growing-threat-to.html

............................................................................................................................................................................................................................................................................................

Protecting Drinking Water from Saltwater Intrusion

CLICK HERE . . . to view . . . 

https://puricare.blogspot.com/2020/12/protecting-drinking-water-from.html

Tuesday, December 22, 2020

SEDIMENT SUPPLY AND THE IMPORTANCE OF BIG RIVERS - Sediment supply is controlled primarily by tectonics and climate. In geologically simple areas, where the basin is fed directly from the adjacent margins and source-area uplift is related to basin subsidence, supply considerations are likely to be directly correlated to basin subsidence and eustasy as the major controls of basin architecture. Such is the case where subsidence is yoked to peripheral upwarps, or in proximal regions of foreland basins adjacent to fold-thrust belts. However, where the basin is supplied by long-distance fluvial transportation, complications are likely to arise. Where the rate of sediment supply is high, it may overwhelm other influences to become a dominant control on sequence architecture. Many sedimentary basins were filled by river systems whose drainage area has been subsequently remodeled by tectonism, and it may take considerable geological investigation to reconstruct their possible past positions. Dynamic topographic processes have generated regional uplifts and continental tilts that have resulted in deep erosion and large-scale continental fluxes of detrital sediment. Much of the detritus derived by uplift and erosion of the Grenville orogen of eastern North America during the late Precambrian may have ended up contributing to the thick Neoproterozoic sedimentary wedges on the western continental margin.

....................................................................................................................................................................................................................................................................................................................................................................................

 Sediment Supply and the Importance of Big Rivers

By OK 

Learning Geology

 

Sediment supply is controlled primarily by tectonics and climate.

In geologically simple areas, where the basin is fed directly from the adjacent margins and source-area uplift is related to basin subsidence, supply considerations are likely to be directly correlated to basin subsidence and eustasy as the major controls of basin architecture.

Such is the case where subsidence is yoked to peripheral upwarps, or in proximal regions of foreland basins adjacent to fold-thrust belts.

However, where the basin is supplied by long-distance fluvial transportation, complications are likely to arise.

Where the rate of sediment supply is high, it may overwhelm other influences to become a dominant control on sequence architecture.

Many sedimentary basins were filled by river systems whose drainage area has been subsequently remodeled by tectonism, and it may take considerable geological investigation to reconstruct their possible past positions.

For example, stratigraphic successions may occur that cannot be related to the evolution of adjacent orogens.

In North America, dynamic topographic processes have generated regional uplifts and continental tilts that have resulted in deep erosion and large-scale continental fluxes of detrital sediment.

For example, much of the detritus derived by uplift and erosion of the Grenville orogen of eastern North America during the late Precambrian may have ended up contributing to the thick Neoproterozoic sedimentary wedges on the western continental margin.

Detailed study of detrital zircons from sedimentary rocks of this age in the western Canadian Arctic indicated that 50% of them are of Grenville age.

A major west-flowing river system was established during the late Proterozoic which transported this detritus some 3,000 km across the continental interior.

Much of the thick accumulations of late Paleozoic and Mesozoic fluvial and eolian strata in the southwestern United States had been derived from Appalachian sources, and this was confirmed by the detrital-zircon.

Tertiary river system draining from the continental interior of North America into Hudson Bay, ultimately delivering sediment to the Labrador Shelf.

This has been supported by the studies of Cenozoic landforms and sediments.


Major river systems may cross major tectonic boundaries, feeding sediment of a petrographic type unrelated to the receiving basin, into the basin at a rate unconnected in any way with the subsidence history of the basin itself.

The modern Amazon river is a good example. It derives from the Andean Mountains, flows across and between, and is fed from several Precambrian shields, and debouches onto a major extensional continental margin.

From the point of view of sequence stratigraphy, the important point is that large sediment supplies delivered to a shoreline may overwhelm the stratigraphic effects of variations in sea level.

A region undergoing a relative or eustatic rise in sea level may still experience stratigraphic regression if large delta complexes are being built by major sediment-laden rivers.

Effects of upstream controls on the development of fluvial graded profiles, fluvial style and the development of nonmarine sequences downstream.

Upstream controls may also be significant in the case of deep-marine deposits.

Major episodes of submarine-fan sedimentation in the North Sea and Shetland-Faeroes basins correlate with pulses of Iceland plume activity, which caused magmatic underplating of the continental margin, and uplift, erosion, and enhanced sediment delivery to offshore sedimentary basins.

A significant example of this long-distance sedimentary control is the Cenozoic stratigraphic evolution of the Texas-Louisiana coast of the Gulf of Mexico.

This continental margin is fed with sediment by rivers that have occupied essentially the same position since the early Tertiary.

The rivers feed into the Gulf Coast from huge drainage basins occupying large areas of the North American Interior.

Progradation has extended the continental margin of the Gulf by up to 350 km.

This has taken place episodically in both time and space, developing a series of major clastic wedges, some hundreds of metres in thickness.

The major changes along strike of the thickness of these clastic wedges is also evidence against a control by passive sea-level change.

Highly suggestive are the correlations with the tectonic events of the North American Interior; for example, the timing of the Lower and Upper Wilcox Group wedges relative to the timing of the Laramide orogenic pulses along the Cordillera.

It seems likely that sediment supply, driven by source-area tectonism, is the major control on the location, timing and thickness of the Gulf Coast clastic wedges.

A secondary control is the nature of local tectonism on the continental margin itself, including growth faulting, evaporite diapirism and gravity sliding.

Variations in deep-marine sediment dispersal in the Gulf of Mexico show very similar patterns to the coastal and fluvial variations.

Large-scale submarine-fan systems are therefore dependent, also, on considerations of long-term sediment supply variation, which may be controlled by plate-margin tectonism, in-plane stress regime and dynamic topography.

In arc-related basins volcanic control of the sediment supply may overprint the effects of sea-level change.

Sediment supply and tectonic activity overprinted the eustatic effects and enhanced or lessened them.

If large supplies of clastics or uplift overcame the eustatic effects, deep marine sands were also deposited during highstand of sea level, whereas under conditions of low sediment input, thin-bedded turbidites were deposited even during lowstands of sea level.

Other examples of the tectonic control of major sedimentary units are provided by the basins within and adjacent to the Alpine and Himalayan orogens.

Sediments shed by the rising mountains drain into foreland basins, remnant ocean basins, strike-slip basins, and other internal basins.

But the sediment supply is controlled entirely by uplift and by the tectonic control of dispersal routes.

For example, the Oligocene Molasse of the Swiss proforeland basin was deposited by rivers flowing axially along the basin, and that these underwent reversal in transport directions as a result of changes in the configuration of the basin and the collision zone during orogenesis.

The shifting of dispersal routes through basins and fault valleys within the Himalayan orogen of central and southeast Asia.

Some of the major rivers in the area (Tsangpo, Salween, Mekong) are known to have entirely switched to different basins during the evolution of the orogen.

Much work remains to be done to relate the details of the stratigraphy in these various basins to the different controls of tectonic subsidence, tectonic control of sediment supply, and eustatic sea-level changes.

Learning Geology is a science website and a community of Earth Scientists that shares geology lessons and host live virtual field tours from all around the world.
With our postings we aim to reach to our fellows with broader public regardless of the boundaries. The postings are done in the great interests of the fellow to learn more and more. The reason for writing is to provide an environment where we can give the best knowledge present just to be shared in the field of Earth and space sciences that we present here. Nobody judge anyone so feel free to feedback and let us know what great ideas you have, be a contributor.  

http://geologylearn.blogspot.com/2015/07/sediment-supply-and-importance-of-big.html