Showing posts with label Drag. Show all posts
Showing posts with label Drag. Show all posts

Wednesday, November 25, 2020

SPEED TO GET MAXIMUM FUEL EFFICIENCY - In general, smaller, lighter, more aerodynamic cars will get their best mileage at higher speeds. Bigger, heavier, less aerodynamic vehicles will get their best mileage at lower speeds. If you drive your car in the "sweet spot" you will get the best possible mileage for that car. If you go faster or slower, the mileage will get worse, but the closer you drive to the sweet spot the better mileage you will get. For most cars, the "sweet spot" on the speedometer is in the range of 40-60 mph. Cars with a higher road load will reach the sweet spot at a lower speed. In general, smaller, lighter, more aerodynamic cars will get their best mileage at higher speeds. The power to push a car down the road varies with the speed the car is traveling. The power required follows an equation of the following form: road load power = av + bv² + cv³ The letter v represents the velocity of the car, and the letters a, b and c represent three different constants: The a component comes mostly from the rolling resistance of the tires, and friction in the car's components, like drag from the brake pads, or friction in the wheel bearings. The b component also comes from friction in components, and from the rolling resistance in the tires. But it also comes from the power used by the various pumps in the car. The c component comes mostly from things that affect aerodynamic drag like the frontal area, drag coefficient and density of the air.

.........................................................................................................................................................................................................................................................................................................

Speed to get maximum fuel efficiency

What speed should I drive to get maximum fuel efficiency?

.

In general, smaller, lighter, more aerodynamic cars will get their best mileage at higher speeds. Bigger, heavier, less aerodynamic vehicles will get their best mileage at lower speeds. If you drive your car in the "sweet spot" you will get the best possible mileage for that car. If you go faster or slower, the mileage will get worse, but the closer you drive to the sweet spot the better mileage you will get. For most cars, the "sweet spot" on the speedometer is in the range of 40-60 mph. Cars with a higher road load will reach the sweet spot at a lower speed. 

HowStuffWork


 

In general, smaller, lighter, more aerodynamic cars will get their best mileage at higher speeds.

Bigger, heavier, less aerodynamic vehicles will get their best mileage at lower speeds.

This is actually a pretty complicated question.

What you are asking is what constant speed will give the best mileage. We won't talk about stops and starts.

We'll assume you are going on a very long highway trip and want to know what speed will give you the best mileage. We'll start by discussing how much power it takes to push the car down the road.

The power to push a car down the road varies with the speed the car is traveling.

The power required follows an equation of the following form:

road load power = av + bv² + cv³

The letter v represents the velocity of the car, and the letters a, b and c represent three different constants:

The a component comes mostly from the rolling resistance of the tires, and friction in the car's components, like drag from the brake pads, or friction in the wheel bearings.

The b component also comes from friction in components, and from the rolling resistance in the tires. But it also comes from the power used by the various pumps in the car.

The c component comes mostly from things that affect aerodynamic drag like the frontal area, drag coefficient and density of the air.

These constants will be different for every car.

But the bottom line is, if you double your speed, this equation says that you will increase the power required by much more than double.

A hypothetical medium sized SUV that requires 20 horsepower at 50 mph might require 100 horsepower at 100 mph.

You can also see from the equation that if the velocity v is 0, the power required is also 0.

If the velocity is very small then the power required is also very small.

So, you might be thinking that you would get the best mileage at a really slow speed like 1 mph.

But there is something going on in the engine that eliminates this theory.

If your car is going 0 mph your engine is still running.

Just to keep the cylinders moving and the various fans, pumps and generators running consumes a certain amount of fuel.

And depending on how many accessories (such as headlights and air conditioning) you have running, your car will use even more fuel.

So even when the car is sitting still it uses quite a lot of fuel.

Cars get the very worst mileage at 0 mph; they use gasoline but don't cover any miles.

When you put the car in drive and start moving at say 1 mph, the car uses only a tiny bit more fuel, because the road load is very small at 1 mph.

At this speed the car uses about the same amount of fuel, but it went 1 mile in an hour. This represents a dramatic increase in mileage.

Now if the car goes 2 mph, again it uses only a tiny bit more fuel, but goes twice as far. The mileage almost doubled!

Efficiency of an Engine

In effect the efficiency of the engine is improving. It uses a fixed amount of fuel to power itself and the accessories, and a variable amount of fuel depending on the power required to keep the car going at a given speed.

So, in terms of fuel used per mile, the faster the car goes, the better use we make of that fixed amount of fuel required.

This trend continues to a point. Eventually, that road load curve catches up with us.

Once the speed gets up into the 40 mph range each 1 mph increase in speed represents a significant increase in power required.

Eventually, the power required increases more than the efficiency of the engine improves. At this point the mileage starts dropping.

Let's plug some speeds into our equation and see how a 1 mph increase from 2 to 3 mph compares with a 1 mph increase from 50 to 51 mph.

To make things easy we'll assume a, b and c are all equal to 1.

Speed

Equation

Result

3 mph

3+3²+3³

39

2 mph

2+2²+2³

14

Power Increase

25

51 mph

51+51²+51³

135,303

50 mph

50+50²+50³

127,550

Power Increase

7,753

You can see that the increase in power required to go from 50 to 51 mph is much greater than to go from 2 to 3 mph.

So, for most cars, the "sweet spot" on the speedometer is in the range of 40-60 mph.

Cars with a higher road load will reach the sweet spot at a lower speed. Some of the main factors that determine the road load of the car are:

Coefficient of drag. This is an indicator of how aerodynamic a car is due only to its shape.

The most aerodynamic cars today have a drag coefficient that is about half that of some pickups and SUVs.

Frontal area. This depends mostly on the size of the car. Big SUVs have more than double the frontal area of some small cars.

Weight. This affects the amount of drag the tires put on the car. Big SUVs can weigh two to three times what the smallest cars weigh.

In general, smaller, lighter, more aerodynamic cars will get their best mileage at higher speeds.

Bigger, heavier, less aerodynamic vehicles will get their best mileage at lower speeds.

If you drive your car in the "sweet spot" you will get the best possible mileage for that car. If you go faster or slower, the mileage will get worse, but the closer you drive to the sweet spot the better mileage you will get.

HowStuffWorks got its start in 1998 at a college professor's kitchen table. From there, we quickly grew into an award-winning source of unbiased, reliable, easy-to-understand answers and explanations of how the world actually works. Today, our writers, editors, podcasters and video hosts share all the things we're most excited to learn about with nearly 30 million visitors to the site each month. Learn more about our authors, and maybe even become one yourself. You can learn more about us in our FAQ.

https://auto.howstuffworks.com/fuel-efficiency/fuel-economy/question477.htm?utm_medium=push&utm_source=pushly&utm_campaign=720381

 























Tuesday, November 26, 2019

AIRCRAFT WINGLETS - A significant source of drag is caused by the high pressure under the wing, which causes air to flow up and over the wingtip before spinning off in a vortex. Wingtip vortices hamper performance, cut into fuel mileage, range, and the speed of the aircraft. To avoid the formation of the vortices, two solutions were explored as being possible. One was to manufacture an infinitely long wing. There would be total separation of the airflow from the lower and upper surface, therefore preventing any vortices from being formed. The other solution was to create a separation between the two differential pressure regions by introducing a structural component. This was to be called a ‘winglet’. Winglets are a proven way to reduce drag, save fuel, cut carbon dioxide and nitrogen oxide emissions, and reduce community noise. This helps the operating airlines save money by decreasing the amount of fuel consumed, as well as landing charges at airports.

Pressure Difference in wings
..........................................................................................................................................................
WingletsAircraft Winglets
Why Are Aircraft Wings Curved At The End?
Team ScienceABC



If you’re a frequent flyer, you may have seen something odd about the aircraft’s wings.
You will likely have noticed that the wings have an additional component at the ends. It makes it look rather stylish, doesn’t it?
In some ways, it looks like the fins or the tail of a fish. Some ends are bent upwards, while some others are oval in shape!
These sections of an aircraft wing are called winglets.
“A winglet is an additional structural component of a wing structure with the primary function of reducing wingtip vortex, which is produced due to the pressure difference between the upper and lower surface of a wing while an aircraft is moving.”
That’s the kind of definition that would make your professor’s knees weak in admiration, but let’s work through this definition in small steps.
To understand the winglet, let’s first understand why an aircraft needs it.
What are Vortices?
A wing works as a result of Bernoulli’s principle, which essentially states, ‘the pressure of a fluid is inversely proportional to the velocity of the same in space’.
When an aircraft is in motion, the airflow is split at the leading edge (front) of the wing.
Due to the angle at which the wing is fixed to the aircraft fuselage, higher air pressure is experienced on the lower surface of the wing than on the upper surface. 
This creates a pressure difference between the top and bottom sections of the wing, which generates lift (upward movement of the aircraft).
The property of fluids is that they flow from a region of higher pressure to a region of lower pressure.
Following this principle, the air tends to move from the high pressure below the wing to the low pressure above the wing around the wingtips, thus forming and leaving behind vortices (mini-tornadoes) as the aircraft moves.
Why is This a Concern for Aircrafts?
A significant source of drag (air resistance) is actually caused by the high pressure under the wing, which causes air to flow up and over the wingtip before spinning off in a vortex.
Wingtip vortices hamper performance, cut into fuel mileage, range, and the speed of the aircraft.
It may look beautiful in the sky, but it actually may cause an aircraft that flies through the same region to lose stability and even result in an emergency situation.
Environmental factors also factor into the need for a solution.
Due to the drag caused by the vortices, a larger consumption of fuel is required, which results in higher emissions of CO2, other artificial particulates and noise.
The Solution – Winglets:
To avoid the formation of the vortices, two solutions were explored as being possible. One was to manufacture an infinitely long wing.
There would be total separation of the airflow from the lower and upper surface, therefore preventing any vortices from being formed. Sound rather outrageous? Obviously, there were some major issues with this.
The other solution was to create a separation between the two differential pressure regions by introducing a structural component. This was to be called a ‘winglet’, a term that was first coined by Richard Whitcomb.
Since the 1980’s, winglets have been a major part of future aircraft designs. For some old aircrafts, winglets were fitted after the plane’s introduction into the market.
Winglets are a proven way to reduce drag, save fuel, cut carbon dioxide and nitrogen oxide emissions, and reduce community noise.
This helps the operating airlines save money by decreasing the amount of fuel consumed, as well as landing charges at airports.
In other words, if you ever make a paper plane, be sure to bend the ends of the wing upwards just a little, and it will fly a bit further. It’s not cheating, it’s just science!
Fun Fact:
In 1897, British engineer Frederick W. Lanchester conceptualized wing end-plates to reduce the impact of wingtip vortices six years before the first powered flight was operated by the Wright Brothers (1903). Talk about being ahead of your times!
Team ScienceABC is the handle of a team of engineers and science graduates who come up with brilliant ideas every now and then, but are too lazy to sit at one spot to complete an article, and dread the idea of being considered ‘regular writers’.
Vortex formation
veqo9vepk4

Saturday, September 22, 2018

AERODYNAMICS AND AIR RESISTANCE - At high speeds, and on exceptionally windy days, air resistance (the forces acted upon a moving object by the air -- also defined as drag) has¬ a tremendous effect on the way a car accelerates, handles and achieves fuel mileage. This where the science of aerodynamics comes into play. Aerodynamics is the study of forces and the resulting motion of objects through the air. Some high-performance cars even have parts that move air smoothly across the underside of the car. Many also include a spoiler -- also known as a rear wing -- to keep the air from lifting the car's wheels and making it unstable at high speeds.

The Toyota Prius' unique shape is one factor that helps it get incredible fuel economy.
.

Aerodynamics And Air Resistance

Vehicles with an aerodynamic design tend to be more stable at higher speeds. See more pictures of sports cars.How Aerodynamics Work

BY PATRICK E. GEORGE




It's unpleasant to think about, but imagine what would happen if you drove your car into a brick wall at­ 65 miles per hour (104.6 kilometers per hour).
Metal would twist and tear. Glass would shatter. Airbags would burst forth to protect you.
But even with all the advancements in safety we have on our modern automobiles, this would likely be a tough accident to walk away from.
A car simply isn't designed to go through a brick wall.
But there is another type of "wall" that cars are designed to move through, and have been for a long time -- the wall of air that pushes against a vehicle at high speeds.
Most of us don't think of air or wind as a wall.
At low speeds and on days when it's not very windy outside, it's hard to notice the way air interacts with our vehicles.
But at high speeds, and on exceptionally windy days, air resistance (the forces acted upon a moving object by the air -- also defined as drag) has­ a tremendous effect on the way a car accelerates, handles and achieves fuel mileage.
This where the science of aerodynamics comes into play. Aerodynamics is the study of forces and the resulting motion of objects through the air [source: NASA].
For several decades, cars have been designed with aerodynamics in mind, and carmakers have come up with a variety of innovations that make cutting through that "wall" of air easier and less of an impact on daily driving.
Essentially, having a car designed with airflow in mind means it has less difficulty accelerating and can achieve better fuel economy numbers because the engine doesn't have to work nearly as hard to push the car through the wall of air.
Engineers have developed several ways of doing this.
For instance, more rounded designs and shapes on the exterior of the vehicle are crafted to channel air in a way so th­at it flows around the car with the least resistance possible.
Some high-performance cars even have parts that move air smoothly across the underside of the car.
Many also include a spoiler -- also known as a rear wing -- to keep the air from lifting the car's wheels and making it unstable at high speeds.
Although, as you'll read later, most of the spoilers that you see on cars are simply for decoration more than anything else.
In this article, we'll look at the physics of aerodynamics and air resistance, the history of how cars have been designed with these factors in mind and how with the trend toward "greener" cars, aerodynamics is now more important than ever.
The Science of Aerodynamics
Before we look at how aerodynamics is applied to automobiles, here's a little physics refresher course so that you can understand the basic idea.
As an object moves through the atmosphere, it displaces the air that surrounds it. The object is also subjected to gravity and drag. 
Drag is generated when a solid object moves through a fluid medium such as water or air. Drag increases with velocity -- the faster the object travels, the more drag it experiences.
We measure an object's motion using the factors described in Newton’s laws. These include mass, velocity, weight, external force, and acceleration.
Drag has a direct effect on acceleration.
The acceleration (a) of an object is its weight (W) minus drag (D) divided by its mass (m).
Remember, weight is an object's mass times the force of gravity acting on it. Your weight would change on the moon because of lesser gravity, but your mass stays the same. To put it more simply:
a = (W - D) / m
(source: NASA)
As an object accelerates, its velocity and drag increase, eventually to the point where drag becomes equal to weight -- in which case no further acceleration can occur.
Let's say our object in this equation is a car. This means that as the car travels faster and faster, more and more air pushes against it, limiting how much more it can accelerate and restricting it to a certain speed.
How does all of this apply to car design? Well, it's useful for figuring out an important number -- drag coefficient.
This is one of the primary factors that determine how easily an object moves through the air.
The drag coefficient (Cd) is equal to the drag (D), divided by the quantity of the density (r), times half the velocity (V) squared times the area (A). To make that more readable:
Cd = D / (A * .5 * r * V^2)
[source: NASA]
So realistically, how much drag coefficient does a car designer aim for if they're crafting a car with aerodynamic intent?
The Coefficient of Drag
We've just learned that the coefficient of drag (Cd) is a figure that measures the force of air resistance on an object, such as a car.
Now, imagine the force of air pushing against the car as it moves down the road.
At 70 miles per hour (112.7 kilometers per hour), there's four times more force working against the car than at 35 miles per hour (56.3 kilometers per hour) [source: Elliott-Sink].
The aerodynamic abilities of a car are measured using the vehicle's coefficient of drag.
Essentially, the lower the Cd, the more aerodynamic a car is, and the easier it can move through the wall of air pushing against it.
Let's look at a few Cd numbers. Remember the boxy old Volvo cars of the 1970s and '80s? An old Volvo 960 sedan achieves a Cd of .36.
The newer Volvos are much more sleek and curvy, and an S80 sedan achieves a Cd of .28 [source: Elliott-Sink].
This proves something that you may have been able to guess already -- smoother, more streamlined shapes are more aerodynamic than boxy ones. Why is that exactly?
Let's look at the most aerodynamic thing in nature -- a teardrop.
The teardrop is smooth and round on all sides and tapers off at the top. Air flows around it smoothly as it falls to the ground.
It's the same with cars -- smooth, rounded surfaces allow the air to flow in a stream over the vehicle, reducing the "push" of air against the body.
Today, most cars achieve a Cd of about .30.
SUVs, which tend to be more boxy than cars because they're larger, accommodate more people, and often need bigger grilles to help cool the engine down, have a Cd of anywhere from .30 to .40 or more. 
Pickup trucks -- a purposefully boxy design -- typically get around .40 [source: Siuru].
Many have questioned the "unique" looks of the Toyota Prius hybrid, but it has an extremely aerodynamic shape for a good reason.
Among other efficient characteristics, its Cd of .26 helps it achieve very high mileage.
In fact, reducing the Cd of a car by just 0.01 can result in a 0.2 miles per gallon (.09 kilometers per liter) increase in fuel economy [source: Siuru].
History of Aerodynamic Car Design
While scientists have more or less been aware of what it takes to create aerodynamic shapes for a long time, it took a while for those principles to be applied to automobile design.
There was nothing aerodynamic about the earliest cars.
Take a look at Ford's seminal Model T -- it looks more like a horse carriage minus the horses -- a very boxy design, indeed.
Many of these early cars didn't need to worry about aerodynamics because they were relatively slow.
However, some racing cars of the early 1900s incorporated tapering and aerodynamic features to one degree or another.
In 1921, German inventor Edmund Rumpler created the Rumpler-Tropfenauto, which translates into "tear-drop car."
Based on the most aerodynamic shape in nature, the teardrop, it had a Cd of just .27, but its unique looks never caught on with the public. Only about 100 were made [source: Price].
On the American side, one of the biggest leaps ahead in aerodynamic design came in the 1930s with the Chrysler Airflow.
Inspired by birds in flight, the Airflow was one of the first cars designed with aerodynamics in mind.
Though it used some unique construction techniques and had a nearly 50-50-weight distribution (equal weight distribution between the front and rear axles for improved handling), a Great Depression-weary public never fell in love with its unconventional looks, and the car was considered a flop.
Still, its streamlined design was far ahead of its time.
As the 1950s and '60s came about, some of the biggest advancements in automobile aerodynamics came from racing.
Originally, engineers experimented with different designs, knowing that streamlined shapes could help their cars go faster and handle better at high speeds.
That eventually evolved into a very precise science of crafting the most aerodynamic race car possible.
Front and rear spoilers, shovel-shaped noses, and aero kits became more and more common to keep air flowing over the top of the car and to create necessary downforce on the front and rear wheels [source: Formula 1 Network].
On the consumer side, companies like Lotus, Citroën and Porsche developed some very streamlined designs, but these were mostly applied to high-performance sports cars and not everyday vehicles for the common driver.
That began to change in the 1980s with the Audi 100, a passenger sedan with a then-unheard-of Cd of .30.
Today, nearly all cars are designed with aerodynamics in mind in some way [source: Edgar].
What helped that change to occur? The answer: The wind tunnel.
Measuring Drag Using Wind Tunnels
To measure the aerodynamic effectiveness of a car in real time, engineers have borrowed a tool from the aircraft industry -- the wind tunnel.
In essence, a wind tunnel is a massive tube with fans that produce airflow over an object inside. This can be a car, an airplane, or anything else that engineers need to measure for air resistance.
From a room behind the tunnel, engineers study the way the air interacts with the object, the way the air currents flow over the various surfaces.
The car or plane inside never moves, but the fans create wind at different speeds to simulate real-world conditions.
Sometimes a real car won't even be used -- designers often rely on exact scale models of their vehicles to measure wind resistance.
As wind moves over the car in the tunnel, computers are used to calculate the drag coefficient (Cd).
Wind tunnels are really nothing new. They've been around since the late 1800s to measure airflow over many early aircraft attempts. Even the Wright Brothes had one.
After World War II, racecar engineers seeking an edge over the competition began to use them to gauge the effectiveness of their cars' aerodynamic equipment.
That technology later made its way to passenger cars and trucks.
However, in recent years, the big, multi-million-dollar wind tunnels are being used less and less.
Computer simulations are starting to replace wind tunnels as the best way to measure the aerodynamics of a car or aircraft.
In many cases, wind tunnels are mostly just called upon to make sure the computer simulations are accurate [source: Day].
Many think that adding a spoiler on the back of a car is a great way to make it more aerodynamic. In the next section, we'll examine different types of aerodynamic add-ons to vehicles, and examine their roles in performance and providing better fuel mileage.
Aerodynamic Add-ons
There's more to aerodynamics than just drag -- there are other factors called lift and downforce, too. 
Lift is the force that opposes the weight of an object and raises it into the air and keeps it there. 
Downforce is the opposite of lift -- the force that presses an object in the direction of the ground [source: NASA].
You may think that the drag coefficient on a Formula One racecar would be very low -- a super-aerodynamic car is faster, right?
Not in this case. A typical F1 car has a Cd of about .70.
Why is this type of racecar able to drive at speeds of more than 200 miles an hour (321.9 kilometers per hour), yet not as aerodynamic as you might have guessed?
That's because Formula One cars are built to generate as much downforce as possible.
At the speeds they're traveling, and with their extremely light weight, these cars actually begin to experience lift at some speeds -- physics forces them to take off like an airplane.
Obviously, cars aren't intended to fly through the air, and if a car goes airborne it could mean a devastating crash.
For this reason, downforce must be maximized to keep the car on the ground at high speeds, and this means a high Cd is required.
Formula One cars achieve this by using wings or spoilers mounted onto the front and rear of the vehicle.
These wings channel the flow into currents of air that press the car to the ground -- better known as downforce.
This maximizes cornering speed, but it has to be carefully balanced with lift to also allow the car the appropriate amount of straight-line speed [source: Smith].
Lots of production cars include aerodynamic add-ons to generate downforce.
While the Nissan GT-R supercar has been somewhat criticized in the automotive press for its looks, the entire body is designed to channel air over the car and back through the oval-shaped rear spoiler, generating plenty of downforce.
Ferrari’s 599 GTB Fiorano has flying buttress B-pillars designed to channel air to the rear as well -- these help to reduce drag [source: Classic Driver].
But you see plenty of spoilers and wings on everyday cars, like Honda and Toyota sedans.
Do those really add an aerodynamic benefit to a car? In some cases, it can add a little high-speed stability.
For example, the original Audi TT didn't have a spoiler on its rear decklid, but Audi added one after its rounded body was found to create too much lift and may have been a factor in a few wrecks [source: Edgar].
In most cases, however, bolting a big spoiler on the back of an ordinary car isn't going to aid in performance, speed, or handling a whole lot -- if at all.
In some cases, it could even create more understeer, or reluctance to corner.
However, if you think that giant spoiler looks great on the trunk of your Honda Civic, don't let anyone tell you otherwise.

Formula One cars are aerodynamically designed to generate maximum downforce.

Vehicles with an aerodynamic design tend to be more stable at higher speeds. See more pictures of sports cars.The Toyota Prius' unique shape is one factor that helps it get incredible fuel economy.These antiques cars demonstrate how little was known about vehicle aerodynamics in the early part of the 20th century.

Cars (and airplanes) have their aerodynamics tested by wind tunnels.­Formula One cars are aerodynamically designed to generate maximum downforce.