Tuesday, December 8, 2020

HOW TO MAKE AQUA REGIA ACID SOLUTION - Aqua regia is an extremely corrosive mixture of nitric and hydrochloric acid, used as an etchant, for some analytical chemistry procedures, and to refine gold. Aqua regia dissolves gold, platinum, and palladium, but not the other noble metals. Here's what you need to know to prepare aqua regia and use it safely. Aqua regia is a corrosive acid mixture made by combining nitric acid and hydrochloric acid. The usual ratio of acids is 3 parts hydrochloric acid to 1 part nitric acid. When mixing the acids, it is important to add the nitric acid to the hydrochloric acid and not the other way around. Aqua regia is used to dissolve gold, platinum, and palladium. The acid mixture is unstable, so it is usually prepared in small amounts and used immediately. Aqua regia preparation involves mixing strong acids. The reaction produces heat and evolves poisonous vapors. Make and use aqua regia solution inside a fume hood, with the sash down as much as is practical to contain the vapors and protect against injury in case of splashing or glassware breakage. Prepare the minimum volume needed for your application. Make sure your glassware is clean. In particular, you don't want any organic contaminants because they can produce a vigorous or violent reaction. Avoid using any glassware that may be contaminated with a chemical containing a C-H bond.

.........................................................................................................................................................................................................................................................................................................

How to Make Aqua Regia Acid Solution

By Anne Marie Helmenstine, Ph.D.


 

Aqua regia is an extremely corrosive mixture of nitric and hydrochloric acid, used as an etchant, for some analytical chemistry procedures, and to refine gold.

Aqua regia dissolves gold, platinum, and palladium, but not the other noble metals.

Here's what you need to know to prepare aqua regia and use it safely.​​

Fast Facts: Aqua Regia

Aqua regia is a corrosive acid mixture made by combining nitric acid and hydrochloric acid.

The usual ratio of acids is 3 parts hydrochloric acid to 1 part nitric acid.

When mixing the acids, it is important to add the nitric acid to the hydrochloric acid and not the other way around.

Aqua regia is used to dissolve gold, platinum, and palladium.

The acid mixture is unstable, so it is usually prepared in small amounts and used immediately.

Reaction to Make Aqua Regia

Here is what happens when nitric acid and hydrochloric acid are mixed:

HNO3 (aq) + 3HCl (aq) NOCl (g) + 2H2O (l) + Cl2 (g)

Over time, nitrosyl chloride (NOCl) will decompose into chlorine gas and nitric oxide (NO).

Nitric acid auto-oxidizes into nitrogen dioxide (NO2):

2NOCl (g) 2NO (g) + Cl2 (g)

2NO (g) + O2 (g) 2NO2(g)

Nitric acid (HNO3), hydrochloric acid (HCl), and aqua regia are strong acids.

Chlorine (Cl2), nitric oxide (NO), and nitrogen dioxide (NO2) are toxic.

Aqua Regia Safety

Aqua regia preparation involves mixing strong acids.

The reaction produces heat and evolves poisonous vapors, so it's important to follow safety protocols when making and using this solution:

Make and use aqua regia solution inside a fume hood, with the sash down as much as is practical to contain the vapors and protect against injury in case of splashing or glassware breakage.

Prepare the minimum volume needed for your application.

Make sure your glassware is clean. In particular, you don't want any organic contaminants because they can produce a vigorous or violent reaction.

Avoid using any glassware that may be contaminated with a chemical containing a C-H bond.

Do not use the finished solution on any material containing an organic.

Wear safety goggles.

Wear a lab coat.

Wear gloves.

If you get drops of any of the strong acids on your skin, wipe them off immediately and rinse with lots of water.

If you spill acid on clothing, remove it immediately.

In the case of inhalation, move immediately to fresh air.

Use the eyewash and seek emergency medical attention in case of eye contact.

In the case of ingestion, rinse the mouth with water and do not induce vomiting.

Neutralize any spills with sodium bicarbonate or similar compound.

Remember, it's best to neutralize a strong acid with a weak base and not a strong base.

Prepare Aqua Regia Solution

The usual molar ratio between concentrated hydrochloric acid and concentrated nitric acid is HCl:HNO3 of 3:1.

Keep in mind, concentrated HCl is about 35%, while concentrated HNO3 is about 65%, so the volume ratio is usually 4 parts concentrated hydrochloric acid to 1 part concentrated nitric acid.

A typical total final volume for most applications is only 10 milliliters. It's unusual to mix up a large volume of aqua regia.

Add the nitric acid to the hydrochloric acid. Do not add hydrochloric to nitric!

The resulting solution with be a fuming red or yellow liquid.

It will smell strongly of chlorine (although your fume hood should protect you from this).

Dispose of leftover aqua regia by pouring it over a large amount of ice.

This mixture may be neutralized with a saturated sodium bicarbonate solution or 10% sodium hydroxide.

The neutralized solution may then be safely poured down the drain. The exception is used solution that contains heavy metals.

A heavy metal-contaminated solution needs to be disposed of according to your local regulations.

Once you have prepared aqua regia, it should be used when it's fresh. Keep the solution in a cool location.

Do not store the solution for an extended length of time because it becomes unstable.

Never store stoppered aqua regia because pressure build-up could break the container.

Another potent acid solution is called "chemical piranha."

If aqua regia isn't suitable for your needs, piranha solution may be what you need.

 

Anne Marie Helmenstine, Ph.D.

Chemistry Expert

Education

Ph.D., Biomedical Sciences, University of Tennessee at Knoxville

B.A., Physics and Mathematics, Hastings College

Introduction

Ph.D. in biomedical sciences from the University of Tennessee at Knoxville - Oak Ridge National Laboratory.

Science educator with experience teaching chemistry, biology, astronomy, and physics at the high school, college, and graduate levels.

ThoughtCo and About Education chemistry expert since 2001.

Widely-published graphic artist, responsible for printable periodic tables and other illustrations used in science.

Experience

Anne Helmenstine, Ph.D. has covered chemistry for ThoughtCo and About Education since 2001, and other sciences since 2013. She taught chemistry, biology, astronomy, and physics at the high school, college, and graduate levels. She has worked as a research scientist and also abstracting and indexing diverse scientific literature for the Department of Energy.

In addition to her work as a science writer, Dr. Helmenstine currently serves as a scientific consultant, specializing in problems requiring an interdisciplinary approach. Previously, she worked as a research scientist and college professor.

Education

Dr. Helmenstine holds a Ph.D. in biomedical sciences from the University of Tennessee at Knoxville and a B.A. in physics and mathematics with a minor in chemistry from Hastings College. In her doctoral work, Dr. Helmenstine developed ultra-sensitive chemical detection and medical diagnostic tests.

ThoughtCo and Dotdash

ThoughtCo is a premier reference site focusing on expert-created education content. We are one of the top-10 information sites in the world as rated by comScore, a leading Internet measurement company. Every month, more than 13 million readers seek answers to their questions on ThoughtCo.

For more than 20 years, Dotdash brands have been helping people find answers, solve problems, and get inspired. We are one of the top-20 largest content publishers on the Internet according to comScore, and reach more than 30% of the U.S. population monthly. Our brands collectively have won more than 20 industry awards in the last year alone, and recently Dotdash was named Publisher of the Year by Digiday, a leading industry publication.

https://www.thoughtco.com/making-aqua-regia-acid-solution-603641

No comments:

Post a Comment