......................
Hard And Soft
Water
Chemistry of Hard and Soft Water
Understand the
Difference Between Hard Water and Soft Water
Anne Marie
Helmenstine, Ph.D.
You've heard the terms
"hard water" and "soft water, but do you know what they mean?
Is one type of water somehow
better than the other? What type of water do you have?
This article looks at the
definitions of these terms and how they relate to water in everyday life.
Hard Water vs Soft Water
Hard water is any water containing an appreciable quantity of dissolved minerals.
Soft water is treated water
in which the only cation (positively charged ion) is sodium. The minerals in
water give it a characteristic taste.
Some natural mineral waters
are highly sought for their flavor and the health benefits they may confer.
Soft water, on the other hand, may taste salty and may not be suitable for
drinking.
If
soft water tastes bad, then why might you use a water softener?
The answer is that extremely
hard water may shorten the life of plumbing and lessen the effectiveness of
certain cleaning agents.
When hard water is heated,
the carbonates precipitate out of solution, forming scales in pipes and tea kettles.
In addition to narrowing and
potentially clogging the pipes, scales prevent efficient heat transfer, so a
water heater with scales will have to use a lot of energy to give you hot
water.
Soap
is less effective in hard water because it reacts to form the calcium or
magnesium salt of the organic acid of the soap.
These salts are insoluble and
form grayish soap scum, but no cleansing lather. Detergents, on the other hand,
lather in both hard and soft water.
Calcium and magnesium salts
of the detergent's organic acids form, but these salts are soluble in water.
How to Soften Water
Hard
water can be softened (have its minerals removed) by treating it with lime or
by passing it over an ion exchange resin.
The ion exchange resins are
complex sodium salts.
Water flows over the resin
surface, dissolving the sodium. The calcium, magnesium and other cations
precipitate onto the resin surface.
Sodium goes into the water,
but the other cations stay with the resin. Very hard water will end up tasting
saltier than water that had fewer dissolved minerals.
Most
of the ions have been removed in soft water, but sodium and various anions (negatively
charged ions) still remain.
Water can be deionized by
using a resin that replaces cations with hydrogen and anions with hydroxide.
With this type of resin, the
cations stick to the resin and the hydrogen and hydroxide that are released
combine to form pure water.
No comments:
Post a Comment