Wednesday, July 31, 2019

NUMBERS ON TIRES - There are variety of tyres you can buy depending on what their specialist applications are. Having a right type of tyre in a vehicle is very important. Tires are to maintain contact between vehicle and ground by providing desired traction, to support the load of vehicle, to deal with various forces acting on vehicle during its motion and, provide cushion against shocks and damping them.


.....................................................................................................................................................
Numbers On Tires
All about tyres, what is the meaning of numbers on the Tyre? What is inside the Tyre?



Tyre, the basic unit of our vehicle was invented first in 1847 lodged by the Scottish inventor Robert William Thomson.
Today’s world, there are variety of tyres you can buy depending on what their specialist applications are is long and varied. 
Having a right type of tyre in a vehicle is very important, so in this article we will read about different types of tyre and its uses.
What is a Tyre?
Tyre is a ring-shaped structured wheel which is used to transfer the vehicle load to ground.
Since their invention natural rubber is the most widely used material in manufacturing of tyres.
At present time these circular rings are made up of rubber, chemicals, fiber, and chemical compounds.
What is the meaning of numbers on tire?
1 Cross section width 195
The first three numbers, in this case 195, refer to the section width of the tyre. This is the measurement, in millimetres, from the tyre’s inner sidewall to its outer sidewall.
2 Aspect ratio
The next 2 numbers 55 means the height is equal to 55% of the 195mm width. The bigger the aspect ratio, the bigger the sidewall will be.
3 Construction type
The letter R means the tyre is a radial construction. Almost all new car tyres are radials. In radial tyres the cord plies are arranged at 90 degrees to the direction of travel, or radially.
4 Rim
The number to the right of the construction type is the rim diameter, measured in inches. In this case, it’s a 16” wheel.
5 Load index 
The final number is the load index i.e. the maximum load (in kg) that the tyre can carry.
What is inside the tyre?
Thread: The tread of a tire or track refers to the rubber on its circumference that makes contact with the road or the ground.
Bead:  the bead is a rubber-coated steel cable whose function is to ensure that the tire remains attached to the wheel rim.
Layers: These different layers are known as plies. Each layer is a different type of fabric. Polyester cord is the most popular ply fabric.
Belts: It is made up of steel and is meant to provide reinforcement to the section that’s directly underneath the tread.
Sidewall: It is made up of various natural and sidewall prevents air from escaping and keeps the body plies protected
What are the functions of tyres?
§  To maintain contact between vehicle and ground by providing desired traction.
§  To support the load of vehicle.
§  Dealing with various forces acting on vehicle during its motion.
§  Providing cushion against shocks and damping them.

Tuesday, July 30, 2019

NUCLEAR BOMB TESTS AND EARTHQUAKES - There is no direct evidence that underground nuclear testing can trigger earthquakes. Underground nuclear testing was the chosen method of many nuclear nations, including the USA, USSR, Great Britain, France, China, and most recently, North Korea. This is not a perfect system, although it is widely considered the safest means of testing, both for nearby populations and the environment itself. The controversy in recent years has arisen due to the significant increase in earthquake frequency all over the globe, leading many to suspect that these massive underground blasts were affecting the tectonic plate structure and behavior, leading to a more volatile planetary crust.

Explosion GIF
.......................................................................................................................................................

Nuclear Bomb Tests And Earthquakes
Could Nuclear Bomb Testing Cause Earthquakes?
John Staughton  



Since the Atomic Age began back in July of 1945, following the detonation of an atomic bomb over Hiroshima, Japan, the world has had a complicated relationship with nuclear power.
For decades, it was believed that nuclear weapons would destroy humanity, likely in the aftermath of an all-out atomic war between the USSR and the USA.
However, an attack on a city wasn’t the only source of fear for people around the world.
As more and more nations developed their own atomic programs, testing was an unavoidable element of their evolution.
In short, once they created an atomic bomb, they needed to make sure it worked.
In the past 70 years, roughly 2,000 nuclear detonation tests have occurred on this planet. Of those tests, nearly 75% of them took place underground.
For decades, there has been a growing fear that underground nuclear tests, which can release as much energy as 5 million tons of TNT, could cause devastating earthquakes and destabilize the very foundation of our planet.
The question is… can nukes actually cause earthquakes?
Short answer: No, there is no direct evidence that underground nuclear testing can trigger earthquakes, but mankind can cause earthquakes in other ways….
Underground Nuclear Testing
In the decades following the development of the first nuclear bomb, research on the physical, geological, short-term and long-term effects of nuclear bombs was extensive.
After realizing that nuclear fallout from above-ground nuclear testing had disastrous effects on the environment and the health of any people affected, it was widely agreed that testing would be safer underwater, in space or underground, where the radiation could be contained or dissipated in a safer way.
Underground nuclear testing was the chosen method of many nuclear nations, including the USA, USSR, Great Britain, France, China, and most recently, North Korea.
All nuclear testing was banned in response to an international accord in 1996, and the only nations to have breached that were India and Pakistan (both in 1998, underground) and North Korea (2006 and 2008, underground).
The process of underground nuclear testing is rather straightforward.
A large hole is dug straight down into the ground, usually 1-3 meters in width, and up to 1 kilometer in depth.
The nuclear weapon is lowered into this hole, and then filled in with layers of sand and pea gravel, which can absorb radiation and prevent it from entering the atmosphere.
There is also a number of lead-lined sensory equipment that can record the explosive strength of the detonation.
This is not a perfect system, although it is widely considered the safest means of testing, both for nearby populations and the environment itself.
In more than 100 cases of underground nuclear testing by the United States alone, radiation did end up escaping into the atmosphere.
The controversy in recent years has arisen due to the significant increase in earthquake frequency all over the globe, leading many to suspect that these massive underground blasts were affecting the tectonic plate structure and behavior, leading to a more volatile planetary crust.
Conspiracy theorists, scientists, governmental leaders and common citizens over the years have supported and spread this idea, but it simply isn’t true.
Underground Nuke —> Earthquake?
The idea of manmade nuclear bomb-inspired earthquakes (or “anthroquakes”) is a frightening prospect, but according to the United States Geological Survey, that shouldn’t be cause for concern.
What people fail to realize is the sheer size and strength of the Earth’s tectonic plates. The amount of strain that can be handled on a daily basis by these plates is enormous.
A 4o-kiloton bomb, for example, releases 100 times less energy than the strain induced on tectonic plates by the diurnal movement of the planet’s tides.
Essentially, if the tidal movement on the planet isn’t causing earthquakes on a daily basis, then a few nuclear detonations underground won’t be enough to rearrange the tectonic plates.
The coincidental nature of certain nuclear detonations with earthquakes in the region reignited concerns over the effects of nuclear testing on the tectonic structure of the planet, but studies have shown that thermonuclear energy release, when moving in a similar way as seismic waveforms, do not have pronounced adverse seismic effects further than 40 kilometers from the blast origin (although there is anecdotal evidence that buildings are affected even beyond that distance).
Attempts to link nuclear testing with earthquakes thousands of kilometers away are therefore misleading and not based in fact.
Correlation does not guarantee causality, but many people are eager to jump to these conclusions.
One of the final nails in the coffin of this theory comes from a 1971 underground nuclear test near the Aleutian Islands, in Alaska.
It was a 5-megaton hydrogen bomb, detonated by the United States, and had a body wave magnitude of approximately 6.9 on the Richter scale. 
This was the largest underground detonation in history, and despite it being set off in the seismically active region of the Aleutian Islands, no subsequent seismic activity on the nearby tectonic plates occurred.
The Truth Behind “Anthroquakes”
Although manmade earthquakes caused by nuclear testing doesn’t have the ability to cause earthquakes, humans have been the source of earthquakes in other situations.
The instantaneous release of energy (occurring in a millionth of a second) connected to a nuclear explosion is not nearly as significant as the shifting of mass.
You can imagine it in these terms; driving a car into a tree is not nearly as impactful as slowly applying more and more weight to the top branches until the tree snaps in half under the strain.
Human beings are good at many things, and moving mass around is one of them. 
Creating dams can change the weight on a certain area of a tectonic plate by hundreds of millions of pounds, namely the area of the valley that backs up to a dam.
When the Hoover Dam was created, hundreds of small earthquakes were detected in the region, despite it not being seismically active before that point.
Some researchers believe that up to 1/3 of anthroquakes are caused by reservoir and damming efforts in various parts of the planet, particularly those in seismically active areas.
Mining thousands of tons of coal from the center of a mountain can, once again, dramatically shift the stress load on a tectonic plate, resulting in small seismic quakes resulting purely from human activities.
Research points to nearly 50% of anthroquakes being caused by mining operations around the world.
As you can see, human beings can do a lot of foolish things to negatively impact the planet and make it a less stable place.
However, while nuclear detonations are some of the most feared and destructive forces on the planet, they are not the human activities that we should be worrying about as the earthquakes keep piling up around the globe.

John Staughton
 is a traveling writer, editor and publisher who earned his English and Integrative Biology degrees from the University of Illinois in Champaign, Urbana. He is the co-founder of a literary journal, Sheriff Nottingham, and calls the most beautiful places in the world his office. On a perpetual journey towards the idea of home, he uses words to educate, inspire, uplift and evolve.
Explosion GIF

Monday, July 29, 2019

DISTILLED WATER - Distilled water can be very impure. There are contaminants that won't separate from the water just from vaporization. Sometimes the distilling process actually adds contaminants that weren't originally present, from the glassware or metal components. Even if the distillation process is scrupulous, impurities come from the container into which the water is placed. Heavy metals are used to stabilize packaging plastics and can leach into the water over time. Plastic monomers coat a new container and become a part of bottled water.

Distilling water is a form of purification, but it doesn't remove all contaminants. In fact, distilled water might not be safe enough to drink!
..........................................................................................................................................

Distilled Water
Distilled Doesn't Mean Pure
Why Distilled Water Isn't Necessarily Pure
by Anne Marie Helmenstine, Ph.D. 



Here's a comment a reader posted in response to my article on removing fluoride from water:
"I've been taught that distilled water is the purest that one can drink. On the original article you write that this is not a safe assumption. How so?"
Distillation does purify water, but it can't remove all contaminants. Actually, distilled water can be very impure.
Consider how distillation works. First, you're basically boiling water and then letting it cool to collect it again.
Ideally contaminants with different boiling points will be removed, if you are careful to collect the distilled liquid at exactly the right temperature and pressure.
It's not as easy as it sounds. Plus, there are contaminants that won't separate from the water just from vaporization.
Sometimes the distilling process actually adds contaminants that weren't originally present, from the glassware or metal components.

For distilled drinking water, keep in mind even if the distillation process is scrupulous, impurities come from the container into which the water is placed.
Heavy metals are used to stabilize packaging plastics and can leach into the water over time.
For that matter, plastic monomers coat a new container and become a part of bottled water.

Anne Marie Helmenstine, Ph.D.
Ph.D. in biomedical sciences from the University of Tennessee at Knoxville - Oak Ridge National Laboratory.
Science educator with experience teaching chemistry, biology, astronomy, and physics at the high school, college, and graduate levels.
ThoughtCo and About Education chemistry expert since 2001.
Widely-published graphic artist, responsible for printable periodic tables and other illustrations used in science.
Experience
Anne Helmenstine, Ph.D. has covered chemistry for ThoughtCo and About Education since 2001, and other sciences since 2013. She taught chemistry, biology, astronomy, and physics at the high school, college, and graduate levels. She has worked as a research scientist and also abstracting and indexing diverse scientific literature for the Department of Energy.
In addition to her work as a science writer, Dr. Helmenstine currently serves as a scientific consultant, specializing in problems requiring an interdisciplinary approach. Previously, she worked as a research scientist and college professor. 
Education
Dr. Helmenstine holds a Ph.D. in biomedical sciences from the University of Tennessee at Knoxville and a B.A. in physics and mathematics with a minor in chemistry from Hastings College. In her doctoral work, Dr. Helmenstine developed ultra-sensitive chemical detection and medical diagnostic tests.
ThoughtCo and Dotdash
ThoughtCo is a premier reference site focusing on expert-created education content. We are one of the top-10 information sites in the world as rated by comScore, a leading Internet measurement company. Every month, more than 13 million readers seek answers to their questions on ThoughtCo.
For more than 20 years, Dotdash brands have been helping people find answers, solve problems, and get inspired. We are one of the top-20 largest content publishers on the Internet according to comScore, and reach more than 30% of the U.S. population monthly. Our brands collectively have won more than 20 industry awards in the last year alone, and recently Dotdash was named Publisher of the Year by Digiday, a leading industry publication.

Distilling water is a form of purification, but it doesn't remove all contaminants. In fact, distilled water might not be safe enough to drink!

RESIDENTIAL ERGONOMIC LIGHTING - You'll find light levels are listed in lumens, which is light output. Light intensity levels may be listed in lux or foot-candles (fc). Lux measurements are roughly 10 times a foot-candle measurement, as a foot-candle is 1 lumen per square foot, and a lux is 1 lumen per square meter. Incandescent light bulbs are measured in watts and may not have the lumen measurement on the packaging; for a frame of reference, a 60-watt bulb produces 800 lumens. Fluorescent lights and LED lights may already be labeled in lumens. Keep in mind that the light is brightest at its source, so sitting far away from a light will not provide you with the lumens listed on the packaging. Dirt on a lamp can cut into the light output as much as 50 percent as well, so it makes a real difference to keep bulbs, glass globes, and shades cleaned.

luxury kitchen with drop lighting
..........................................................................................................................................
Residential Ergonomic Lighting
Ergonomic Lighting Levels by Room for Residential Spaces
by Chris Adams 



Ergonomics, as it relates to lighting, is basically having the right amount and location of lighting for what you're doing.
In the workplace, it can be making sure computer monitors don't have too much glare on them (to prevent eyestrain) or ensuring that people performing tasks that require precision and fine-detail work have lighting on a path that ensures that there are no shadows cast on what they're doing.
In the home, having ergonomic lighting can mean installing task lighting above kitchen counters or a workbench or making sure that hallways and stairways have enough lighting in them for safety.
Making Sense of Measurements
You'll find light levels are listed in lumens, which is light output.
Light intensity levels may be listed in lux or foot-candles (fc).
Lux measurements are roughly 10 times a foot-candle measurement, as a foot-candle is 1 lumen per square foot, and a lux is 1 lumen per square meter.
Incandescent light bulbs are measured in watts and may not have the lumen measurement on the packaging; for a frame of reference, a 60-watt bulb produces 800 lumens.
Fluorescent lights and LED lights may already be labeled in lumens.
Keep in mind that the light is brightest at its source, so sitting far away from a light will not provide you with the lumens listed on the packaging.
Dirt on a lamp can cut into the light output as much as 50 percent as well, so it makes a real difference to keep bulbs, glass globes, and shades cleaned.
Room Lighting Levels
Outdoors on a clear day, lighting is approximately 10,000 lux.
By a window inside, the available light is more like 1,000 lux.
In the center of a room, it can drop dramatically, even down to 25 to 50 lux, hence the need for both general and task lighting indoors.
A broad guide is to have general, or ambient, lighting in a passageway or a room where you don't perform concentrated visual tasks at 100–300 lux.
Raise the level of light for reading to 500–800 lux, and concentrate task lighting on your needed surface at 800 to 1,700 lux.
For example, in an adult's bedroom, you need lighting to be lower to wind down your body for sleep.
In contrast, a child's bedroom may be where he or she studies as well as sleeps, so both ambient and task lighting would be needed.
Similarly, in dining rooms, the ability to change the number of lumens through different types of lighting (ambient or over the center of the table) or dimmer switches can make the space more versatile, from an active area during the day to a relaxing space in the evening.
In the kitchen, pendant lights above islands and range hoods with lighting over the stove are additional ways to use task lighting.
The following is a list of minimum lighting levels for residential spaces.




Kitchen
General
300 lux

Countertop
750 lux



Bedroom (adult)
General
100–300 lux

Task
500 lux



Bedroom (child)
General
500 lux

Task
800 lux



Bathroom
General
300 lux

Shave/makeup
300–700 lux
Living room/den
General
300 lux

Task
500 lux



Family room/home theater
General
300 lux

Task
500 lux

TV viewing
150 lux



Laundry/utility
General
200 lux



Dining room
General
200 lux



Hall, landing/stairway
General
100–500 lux



Home office
General
500 lux

Task
800 lux



Workshop
General
800 lux

Task
1,100 lux
Chris Adams
Human factors engineer and industrial designer
Human systems integration lead at Strata-G Solutions, Inc.
Experience
Chris Adams is a former writer for ThoughtCo who wrote about ergonomics for more than nine years. Ergonomics is the study of how humans effectively interact with their work environment. Chris has more than 11 years of experience working in the field of human factors and ergonomics. He was a human factors and systems engineer with Jacobs Engineering working on NASA's the Ares I and V rocket systems. Chris later became the lead of human-system integration for Strata-G Solutions, Inc. 
Chris specializes in furniture design and corporate identity and works as an independent consultant on various design projects. His work for ThoughtCo appears on many websites, newsletters, and books which focus on engineering spaces for human use.
Education
Chris Adams earned a Bachelor of Industrial Design (B.I.D.) in Industrial and Product Design from Auburn University in 1999.
ThoughtCo and Dotdash
ThoughtCo is a premier reference site focusing on expert-created education content. We are one of the top-10 information sites in the world as rated by comScore, a leading Internet measurement company. Every month, more than 13 million readers seek answers to their questions on ThoughtCo.
For more than 20 years, Dotdash brands have been helping people find answers, solve problems, and get inspired. We are one of the top-20 largest content publishers on the Internet according to comScore, and reach more than 30% of the U.S. population monthly. Our brands collectively have won more than 20 industry awards in the last year alone, and recently Dotdash was named Publisher of the Year by Digiday, a leading industry publication.
luxury kitchen with drop lighting