Saturday, May 26, 2018

MOUNTAINS TO CLIMB - Rising approximately 29,035 feet above sea level, Mount Everest is the ultimate mountain to climb: It's the tallest mountain on the face of the Earth. Since Sir Edmund Hilary and Tenzing Norgay first conquered this peak in 1953, there have only been about 2,500 climbs to the summit. Located in the Himalayas of Nepal and China, Mount Everest is an extremely difficult mountaineering expedition.

. 

Mountain Climbing

Top 10 Mountains to Climb 

BY SARAH WINKLER & JOHN PERRITANO





Mountain climbing is an extremely popular pastime. Whether you're simply taking a day hike to relieve stress and enjoy the outdoors, or you're a hardcore climber pushing the limits to summit a mammoth like Everest or K2, the experience is exhilarating.
A hiker surveys the slope.
But with today's technological advances and guide companies geared toward extreme travel and mountain climbing, more thrill seekers are able to explore some of the world's most remote mountains, some of which top out at heights of more than 11,000 feet (3,352 meters).
So which are the top 10 mountains to climb in the world?
It's a tough list to narrow down, but ours includes mountains suited for mostly for expert climbers, with a few added in for weekend mountaineers, as well.
Read on to see if you've summited any of the top 10 yet.
10  K2
Known by the locals as Chogori, K2 is the second tallest mountain in the world, topping out at 28,251 feet (8,611 meters).
K2 is the second tallest mountain in the world, second only to Mt. Everest.
K2 is not for the novice climber, and sometimes not even for the experienced.
Located in the Karakoram Range between China and Pakistan, K2 is more difficult to climb than Mount Everest, the world's highest peak.
While thousands have ascended Everest, only a few hundred have conquered K2 [source: Encyclopedia Britannica].
In fact, just getting to the base of the mountain is an adventure.
Climbers have to drive around dangerous, narrow mountain roads and then hike eight days before arriving at the mountain.
K2 is often plagued by falling rocks, avalanches and sudden storms, making it one of the most dangerous mountains on the planet to climb.
In 2008, 11 climbers died on K2, including a 61-year-old grandfather making his third attempt to scale the monstrous peak [sources: Weir;Encyclopedia Britannica].
There are a number of climbing routes on K2, all but two beginning from the Pakistan side where basecamp is located.
The Abruzzi Spur route, while considered the most dangerous, it is the most common and was first climbed by the Italians in 1954 [source: K2 Climbnet].
While you might be able to get fresh bread, vegetables and even beer from the villages near Everest, there are no big box stores near K2.
Because K2 is so remote, getting what you need close to the mountain just isn't going to happen.
Islamabad, which is more than 200 miles (321.87 kilometers) away, is not a great place to shop for gear. Bring all you can from home.
9   Mount Elbrus
Unlike K2, Mount Elbrus -- the Jewel of the Caucasus -- is much easier to climb.
Mount Elbrus, which straddles Europe and Asia,
is known as the Jewel of the Caucasus Mountains.
With an elevation of 18,481 feet (5,633 meters), Mount Elbrus, like the rest of the Caucasus, straddles Europe and Asia in Russia.
If you're going to climb Elbrus, the best time to go is from June to August.
Experts say Elbrus is not technically difficult, but shifting weather patterns can make it tricky.
So, have your crampons for ice climbing, warm clothing and sturdy boots ready [source: Adventure Alternative].
Although the highest peak in Europe, Elbrus is technically the easiest peak to climb in the region.
A less experienced climber can easily maneuver up the glaciated twin summit.
The route used by most is long and strenuous, but not difficult. Be careful, though.
Although Elbrus is technically easy, it can still be deadly.
Around 15 to 30 people die on the mountain each year, mainly because they are disorganized and poorly equipped.
The mountain is a high, tall and jagged extinct volcano that last erupted in 50 A.D. Today, its crater is filled with ice and snow [source: Summitpost.org].
When climbing Elbrus, it is best to bring an ice ax, 12-point step-in crampons, sunglasses, and typical climbing footwear and clothing.
The day you climb the summit will be long, but don't fret.
You'll leave from huts near the peak and return once you top the mountain.
8   Annapurna
Long before anyone stood on the summit of Mount Everest there was Annapurna, the 26,493 foot (8,075.07 meter) Himalayan peak in Nepal.
Annapurna is another massive peak in the Nepalese Himalayas.
First scaled by Maurice Herzog and an expedition of French climbers in 1950, Annapurna was the highest mountain anyone had ever climbed until Sir Edmund Hilary and Tenzing Norgay ascended Everest in 1953.
Herzog and his team had no clue where they were going, and had to find their own route to the top. It took 20 years for another team to follow [source: Everest News].
There are actually six peaks in the Annapurna Range, including the towering Annapurna I.
Annapurna is Sanskrit for "Goddess of the Harvests," and Annapurna I is the 10th largest mountain in the world.
The best time to climb is between April and October.
Not only is climbing any one of the peaks an adventure, but your trek will take you through many Nepalese villages, including several with whitewashed buildings and cobbled streets [sources: Visit HimalayaUnearthing Asia].
.
7   Citlaltepetl and Iztaccihuatl
If you're looking for a couple of tall mountains to climb that are closer to the states, then travel to Mexico where two extinct volcanoes, Citlaltepetl and Iztaccihuatl, tower over the countryside.
Citlaltepetl, also known as Pico de Orizaba, is Mexico's tallest mountain.
With an elevation of 18,405 feet (5,610 meters) and 17,159 feet (5,230 meters) respectively, Citlaltepetl, located between Puebla and Veracruz, and Iztaccihuatl, southwest of Mexico City, require climbers to have strong mountaineering skills.
The best time to climb either is from October to April, otherwise conditions will be more extreme than at any other time.
The key to climbing both peaks is to be acclimatized to the high altitude, which generally takes two to three days [source: Mexico Extreme].
Citlaltepetl is the highest mountain in Mexico and the third highest in North America.
Iztaccihuatl is the third highest in Mexico and the seventh highest on the continent [source: International Mountain Adventure].
In November 2009, blind climber Erik Weihenmayer and a group of blind children climbed Iztaccihuatl.
If you're going to take the standard route up Iztaccihuatl, it is best to bring a backpack, gloves, mountain boots, warm socks and other typical gear.
There are several vertical ice walls created by glaciers, which should make ice climbers melt.
At base camp you can find food stands and a market where you can buy climbing gear.
The main route up Iztaccihuatl is the La Arista del Sol, or the Ridge of the Sun.
The route is relatively easy, although if you're not acclimatized you might suffer from altitude sickness.
6   Mount Khuiten
Located in the heart of Mongolia, Mount Khuiten is one hard mountain to get to.
Mount Khuiten is one of the most remote mountains on the planet to climb.
Straddling the border of Russia, Mongolia and China, and reaching 14,350 feet (4,374 meters), Mount Khuiten is tiny compared to Everest and K2.
Still, it sits in the remotest part of Mongolia and is the tallest peak in the country.
You need to be fit if you're going to climb Khuiten, although trekkers can easily explore the area around base camp.
Because of its remoteness, you should keep the weight of your gear -- which should include hiking boots and mountaineering boots -- at 33 pounds (15 kilograms).
Although the climb isn't difficult for the locals, it is technical, and requires some skill.
The route to the top isn't exactly steep, but it is scarred with crevasses from the Potanin Glacier, so watch where you step.
Because Mount Khuiten is one of the least accessible mountains on the planet, some local adventure groups will shuttle you to the mountain using camels [source: Ke Adventure Travel].
5   Mount Kilimanjaro
The tallest mountain in Africa, flat-topped Kilimanjaro is located near Tanzania's northern border.
Scientists say the snow atop Africa's highest peak
is melting because of global warming
.
Kilimanjaro is made up of three extinct volcanoes: Kibo, Mawenzi and Shira. Uhuru, Kilimanjaro's highest peak, reaches approximately 19,330 feet (5,892 meters) tall.
Kilimanjaro is a unique climb in that you don't need much climbing equipment or experience to conquer its heights.
A physically fit novice climber can climb Kilimanjaro in about five days.
You'll likely begin your climb in the lush lowland forest area where you'll see vegetation like beautiful heather and proteas.
At an elevation of about 10,498 feet (3,200 meters), you'll encounter a dramatic expanse of moorland with plants like giant groundsels and lobelia.
At 13,123 feet (4,000 meters), the landscape changes to a breathtaking alpine desert.
Then, at 16,404 feet (5,000 meters), you'll begin your trek to the summit where you'll encounter the Kibo crater, 600 feet (182 meters) deep and 1.5 miles (2.4 kilometers) across, and Uhuru's peak on Kibo's rim.
Of the three volcanic summits on Kilimanjaro, Kibo looks the most like a volcanic crater and is covered with snow due the glaciers in its surface.
.
4   The Matterhorn
A climber views the Matterhorn from a distance.
Located in the Alps of Switzerland and Italy, the Matterhorn, one of the most popular mountains to climb in the world, reaches an elevation of 14,692 feet (4,478 meters).
Depending on your skill level, you can choose from a variety of routes to the summit.
For example, if you're a beginner climber, you can take the popular Horni Ridge or Lion routes.
These routes feature fixed ropes, huts and ladders along the way to the summit.
However, if you're a more skilled climber, you can tackle a route of increasing difficulty, such as the Zmutt, North Face or Furggen Ridges.
The Matterhorn looks like a pyramid with steep ridges that jut out from the glaciers that surround it.
Due to the isolated position of the Matterhorn, the weather on the mountain can change quickly, so bring versatile clothing and supplies.
The best time for tackling the Matterhorn is during the summer months; however, summer storms can bring about winter conditions, which means most recreational climbers can't tackle the mountain.
The Matterhorn is definitely a long and difficult climb, requiring a great deal of skill to negotiate its unstable rocks and varying weather conditions.
However, conquering this world famous peak is a source of pride for a lifetime.
3  Fitzroy and Cerro Torre, Patagonia
Located in both Argentina and Chile in the southernmost part of the Andes, the mountains of Patagonia climb to breathtaking heights.
Snow covers the mountain peaks of Patagonia.
The peaks of Fitzroy, 11,073 feet (3,375 meters) above sea level, and Cerro Torre, 10,262 feet (3,128 meters) above sea level, offer truly breathtaking scenes of granite peaks that jut out into the sky and vertical faces of the mountains that fall away for about a mile down.
Due to the influence of the weather patterns of the nearby ocean, you'll be likely to encounter somewhat temperate weather throughout most of Patagonia, but temperatures during the winter have been known to drop below freezing.
With granite spires of sheer faces, these rocky peaks feature steep inclines, so rock climbing experience is helpful in conquering their heights.
2  Mount McKinley
The highest peak in North America, Mount McKinley, also known as Denali, towers at heights of 20,320 feet (6,194 meters).
The first European to refer to Denali was George Vancouver,
a British explorer who spent a month charting the waters of Cook Inlet in 1794.
From base to summit, the elevation rises 18,011 feet (5,490 meters), the greatest elevation gain in the entire world.
A part of the Yukon Mountain Range and the centerpiece of Denali National Park, Mount McKinley is surrounded by five glaciers and numerous icefalls.
Mount McKinley is an extremely difficult climb and is categorized as a major mountain expedition.
While the climb itself is not exceptionally difficult, the severe weather that climbers encounter on their way to the summit makes for a challenging climb.
It's best to climb Mount McKinley in the spring months.
1  Mount Everest
Rising approximately 29,035 feet above sea level, Mount Everest is the ultimate mountain to climb: It's the tallest mountain on the face of the Earth.
Not many climbers summit Everest without a team of Sherpas,
who live in the shadow of the great mountain
and are genetically acclimated to the high altitude.
Since Sir Edmund Hilary and Tenzing Norgay first conquered this peak in 1953, there have only been about 2,500 climbs to the summit.
Located in the Himalayas of Nepal and China, Mount Everest is an extremely difficult mountaineering expedition.
Climbers have to obtain a permit from the Nepalese or Chinese governments to attempt to climb Mount Everest.
If you don't want to attempt to reach the summit, you can take a trek to the base camp of Everest on the north or south side of the mountain.
On the northern side of the mountain, you can visit a Buddhist monastery at the foot of the Rongbuk Glacier. Here, you can contemplate your view of the world's tallest peak.

John Perritano is an award-winning journalist and author, and regular contributor to HowStuffWorks. He likes writing about science, history, sports and anything else that helps pay the mortgage. You might have noticed that he often mentions his favorite family members — his dogs — in his articles. John holds a master’s degree in U.S. History from Western Connecticut State University, and has worked for many publishers including Time-Life, National Geographic, Scholastic and others. He lives in Southbury, Connecticut, on “Big Dog Farm.” It’s a real place. Honest. It even has a sign.
Multi-Media Filter, Highly-Activated Carbon Filter,
Zeolite-Process Water Softener With Brine Tank,
Fiberglass Ballast-Type Pressure Tank
(fully automatic backwash & regeneration)
PURICARE 
INDUSTRIAL 
ENTERPRISES 
Water 
Treatment 
Systems
.
.
...
Aganan, Pavia, Iloilo, Philippines

Friday, May 25, 2018

WATCH ACCURACY - In the 20th century, scientists developed clocks set to the vibrations of crystals and even individual atoms, which made it possible to measure time in units so tiny -- down to the trillionths of a second -- that they were beyond normal, unaided human perception. That's why we all have the exact same time on our watches, and we're all precisely on time for our appointments today. Except that we're not.


.
Accuracy Of Watches

How accurate is my watch?

Perhaps you've experienced this before: You arrive for an important appointment, and your watch says you're precisely on time.
But much to your dismay, the receptionist remarks that they've been wondering whether you were going to show; she points to the wall clock, which indicates that you're five minutes late.
After you recover from feeling flustered, you probably wonder: Just how in the heck did that happen?
After all, you're the super-conscientious sort -- the kind of person who buys a watch and then promptly calls the U.S. Naval Observatory's "correct time" number (202-762-1401) to set it precisely -- down to the second.
So how in the world does your timepiece always wind up being a little bit off?
And sometimes it's more than just a little bit -- or at least that's what your friends insist.
Which leads to another question: Whose timepiece is correct -- yours or theirs?
And furthermore, just how accurate can anyone expect his or her watch to be?
It's enough to make want to throw up your hands and sing the Chicago's 1969 hit "Does anybody really know what time it is?" (No? You don't feel like singing?)
Well, if it's any consolation, you're hardly the first person to feel bedeviled by personal timekeeping.
It's a bewildering thing. But we're going to get to the bottom of it.
First, let's take a look at the history of the watch.
A Brief History of (Correct) Time
As you might expect, early humans didn't wear watches.
And they didn't really need them, either, since the nomadic hunter-gatherer lifestyle didn't require them to catch commuter trains or keep track of billable hours for clients.
But the development of civilization and the division of labor put more pressure on humans to function together efficiently.
Sundials, which measured shadows cast by the sun, were an early innovation.
The Egyptians, who were concerned with keeping time at night so their priests would know when to perform rituals, invented the water clock -- basically, a giant vase with a hole in the bottom, which measured hours in drips [source: Woods].
In Medieval Europe in the 1300s, the advent of mechanical clocks made even precise timekeeping feasible.
The first mechanical clocks were only accurate to within 15 minutes, but advances were made when the late-1600s Dutch scientist Christiaan Huygens developed a pendulum clock that lost just 10 seconds of time each day [sources: LienhardNIST].
In the 1850s, American Watch Co. in Waltham, Mass., marketed the first mass-produced spring-powered pocket watches, which enabled people to keep track of time wherever they went [source: NMAH].
But once everyone had clocks and watches, there was another, trickier dilemma: What time should everyone set them to?
In 19th-century America, there were hundreds of local times, each determined by the big clocks at local courthouses or city halls, which in turn were set to the solar noon at each location.
That meant that when it was noon in Chicago, it was 11:40 a.m. in St. Louis and 12:18 in Detroit.
This posed a problem for the then-growing railroad industry, which needed a reliable standard for train schedules [source: Mansfield].
The railroads themselves set their clocks to celestial observations at the Harvard College Observatory, which they obtained via telegraph [source: NMAH].
To eliminate the discrepancy between local and railroad time, in 1883, railroad companies divided the U.S. into four time zones, each with a standard time, and compelled cities to adjust to them, or face economic isolation.
People in Maine bristled at having to reset their clocks 25 minutes to what they derided as "Philadelphia Time," but eventually the whole nation was synchronized [source: Mansfield].
In the 20th century, scientists developed clocks set to the vibrations of crystals and even individual atoms, which made it possible to measure time in units so tiny -- down to the trillionths of a second -- that they were beyond normal, unaided human perception [source: NMAH].
That's why we all have the exact same time on our watches, and we're all precisely on time for our appointments today.
Except that we're not. So, what's up with that?
How much does watch accuracy vary, and why?
At least in theory, we all should be Johnny-on-the-spot synchronized.
Starting in the early 1970s, the advent of battery-powered quartz wristwatches gave ordinary folks access to a timekeeping technology that once was available only to scientists and technicians [source: NMAH].
Basically, if you apply electricity to a tiny piece of quartz and then bend it, the crystal will give off a relatively constant electrical signal that can be used to operate an electronic clock face [source: NIST].
By the early 2000s, quartz watches had become so popular that mechanical watches had been reduced to just 13 percent of the global watch market [source: IEEE].
But consumer-grade quartz watches aren't totally precise.
Remember, we're talking about relatively cheap miniature devices that are churned out rapidly in vast quantities in factories -- not some multi-million-dollar gadget custom built for a lab.
Even the most expensive quartz-crystal watch in the jewelry store still relies on a mechanical vibration whose frequency can be affected by a variety of factors, including a crystal's size and shape.
No two quartz crystals are exactly alike, which can lead to at least a slight discrepancy between two watches from the same assembly line [source: NIST].
Additionally, watches' precision can be affected by external factors, such as temperature and humidity, and by wear and tear that affects the stability of the tiny motors inside them, which generate the electric field to which the crystals are exposed [source: Lombardi].
The upshot is that quartz watches tend to become slightly less accurate over time -- with a great deal of emphasis on "slightly."
Chronocentric.com, a Web site for timepiece enthusiasts, estimates that consumer-grade quartz watches typically lose between a tenth of a second and two seconds per day -- a discrepancy that, if left uncorrected over long periods, could lead to a watch being off by a few minutes [source: Chronocentric.com].
A study published in Horological Journal in 2008, however, suggests that at least a few cheap watches are vastly more accurate. Researchers, who looked at humble timepieces that included a counterfeit Rolex purchased from a street vendor for $15 and a $30 discount store Timex, found they were all accurate to within a few thousandths of a second per day.
It would take years for such a shift to become noticeable to their owners [source: Lombardi].
Setting Your Watch for Accuracy
So, if even cheap quartz watches are accurate to within less than a second per day, why was your watch so far off when you walked into that office for your appointment?
The likely reason is that you either didn't set it to the correct time in the first place, or you've been wearing it nonstop for ages, and possibly subjected it repeatedly to humidity and temperature extremes that affected its operation.
But you probably don't need to buy a new watch. Instead, it's easier just to check it every few months against a reliable reference, and reset it if necessary.
If you're in the U.S., check with the National Institute of Standards and Technology, which has two radio stations, one in Colorado and the other in Hawaii, that provide a continuous time signal.
You can access the Colorado station by phone at (303) 449-7111 and the one in Hawaii at (808) 335-4363.
The time provided by telephone is accurate to within 30 milliseconds, which is the maximum delay caused by cross-country telephone lines [source: NIST].
The official U.S. government time, which is based on NIST and the U.S. Naval Observatory in Washington, D.C., is available over the Internet at www.time.gov [source: NIST].
NIST also provides a free program that will synchronize your Windows computer with the government's official clock [source: NIST].
In other parts of the world, you can set your watch to the correct time by consulting www.worldtimeserver.com, a promotional Web site offered by a software company that gets its data from the Royal Observatory at Greenwich in the UK.
By syncing up with these timekeeping bodies every so often, perhaps you'll never be late for an important appointment again.
Author's Note
As someone who's old enough to remember cheap wristwatches that gradually slowed if you forgot to hand-wind them often enough, I was surprised to learn that today's cheap battery-powered quartz watches are accurate to within less than a second per day.
Given how reliable they are, it's all the more amazing that any of us are late for anything.

Patrick J. Kiger has written for HowStuffWorks since 2008 covering a wide array of topics, from history and politics to pop culture and technology. He worked as a newspaper reporter for the Pittsburgh Press, and the Orange County Register in California, where he covered one of the biggest serial murder cases in U.S. history, and also as a staff writer at Baltimore Magazine. As a freelancer, Patrick has written for print publications such as GQ, Mother Jones and the Los Angeles Times, and on the web for National Geographic Channel, Discovery News, Science Channel and Fast Company, among others. In recent years, he's become increasingly interested in how technological advances are altering urban life and the design of cities, and has written extensively on that subject for Urban Land magazine. In his spare time, Patrick is a longtime martial arts student and a fan of crime fiction, punk rock and classic Hollywood films.

Multi-Media Filter, Highly-Activated Carbon Filter,
Zeolite-Process Water Softener With Brine Tank,
Fiberglass Ballast-Type Pressure Tank
(fully automatic backwash & regeneration)
.
PURICARE 
INDUSTRIAL 
ENTERPRISES 
Water 
Treatment 
Systems
.
...

Aganan, Pavia, Iloilo, Philippines
...

CLICK HERE . . . to view company profile . . .
Reverse Osmosis with Steel Tank 
& Cartridge Pre-Filters

Submersible Pumps

Tachmina Solenoid-Driven
Chemical Metering Pump
- ensures regulated dosing
of chlorine into water system
without human intervention