PVC PLASTICS: POLYVINYL CHLORIDE - PVC is predominant in the construction industry due to its low production cost, malleability, and light weight. It is used as a replacement for metal in many applications where corrosion can compromise functionality and escalate maintenance costs. Many of the world's pipes are made from PVC and these are used in industrial and municipal applications. It is also used to make pipe fitting and pipe conduits. It does not have to be welded and can be connected with the use of joints, solvent cement and special glues -- key points that highlight its installation flexibility.

......................................................................................................................

PVC Plastics: Polyvinyl Chloride

An Introduction to Polyvinyl Chloride

by Todd Johnson 

Polyvinyl chloride (PVC) is a popular thermoplastic that contains high levels of chlorine which can reach up to 57%.

Carbon, which is derived from oil or gas is also used in its fabrication.

It is an odorless and solid plastic that is white, brittle and can also be found on the market in the form of pellets or white powder.

PVC resin is often supplied in the powder forms and its high resistance to oxidation and degradation make it possible to store the material for long periods.

Some authors/activists that oppose the manufacturers of PVC often refer to it as the "Poison Plastic" due to the toxic pollutants it might release.

When plasticizers are added it becomes softer and more flexible.

Uses of PVC

PVC is predominant in the construction industry due to its low production cost, malleability, and light weight.

It is used as a replacement for metal in many applications where corrosion can compromise functionality and escalate maintenance costs.

Many of the world's pipes are made from PVC and these are used in industrial and municipal applications.

It is also used to make pipe fitting and pipe conduits.

It does not have to be welded and can be connected with the use of joints, solvent cement and special glues -- key points that highlight its installation flexibility.

The material is also present in the electrical components such as electrical insulation, wires, and cable coatings.

In the healthcare industry, it is used to make feeding tubes, blood bags, intravenous (IV) bags, parts of dialysis devices and many other items.

This is only possible when phthalates are added to it.

Phthalates are used as plasticizers to produce flexible grades of PVC (and other plastics), thus making it better suited for the aforementioned applications due to improved performance characteristics.

Common consumer products such as raincoats, plastic bags, toys, credit cards, hoses, doors and window frames and shower curtains are also made from PVC.

This is not an exhaustive list of the many products that can be found around the household with PVC as its main constituent.

Advantages of PVC

As mentioned earlier, PVC is a low-cost material that is lightweight and as such, is easy to handle and install.

Compared to other types of polymers, its manufacturing process is not limited to the use of crude oil or natural gas.

Some use this point to argue that it a sustainable plastic since these forms of energy are known to be nonrenewable.

PVC is also a durable material and is not affected by corrosion or other forms of degradation. 

It can easily be converted into different forms making its use across various industries an evident advantage.

Being a thermoplastic it can be recycled and converted into new products for different industries, but this is not an easy process due to the many formulations used to manufacture PVC.

It also presents chemical stability which is an important factor when PVC products are applied in environments with different types of chemicals.

This characteristic guarantees that it maintains its properties without undergoing significant changes when chemicals are added. 

Other advantages include:

·               Biocompatible

·               Clarity and transparency

·               Resistance to chemical stress cracking

·               Low thermal conductivity

·               Requires little to no maintenance

Disadvantages of PVC

PVC is often referred to as the "Poison Plastic" and this is due to the toxins it can release during manufacture, when exposed to fire, or decomposed in landfills.

These toxins have been linked to health problems that include, but are not limited to cancer, birth development problems, endocrine disruption, asthma, and lung problems.

While many PVC manufacturers point to its high content of salt as being a major advantage, it is this main ingredient along with the possible release of dioxin and phthalate that are possible contributing factors to the hazards it might pose to human health and the environment.

The health concerns of PVC plastics, if any, are still highly debatable.

Future of PVC Plastics

PVC plastics account for a lot of plastics that are used in the world today. This material is ranked as the third most used plastic falling behind polyethylene and polypropylene.

The concerns regarding its threat to human health have prompted research around the use of sugarcane ethanol as the feedstock for PVC instead of naphtha.

Additional research is also being conducted on bio-based plasticizers as a solution for phthalate-free plasticizers.

These experiments are still in their initial stages, but the hope is to develop more sustainable forms of PVC that do not affect human health or threaten the environment during the manufacture, use and disposal stages.

With the many excellent characteristics that PVC presents, it continues to be a widely used plastic across various industries.

Todd Johnson

Regional Sales Manager for Composites One, a distributor of composite materials.

B.S. in Business Management from University of Colorado Boulder's Leeds School of Business

Business Development Manager for Ebert Composites Corporation

Experience

Todd Johnson is a former writer for ThoughtCo, who wrote about plastics and composite materials for 2-1/2 years between 2010 and 2013. He is a Regional Sales Manager at Composites One, a composite materials distributor in San Diego, CA. Johnson provides support to the Greater San Diego manufacturers of fiber reinforced and polymer products. He regularly attends composite industry trade shows including JEC, ACMA, SME, and SAMPE. In 2008 he presented at the Global Pultrusion Conference in Baltimore, MD. Previously, Todd spent six years as the Business Development Manager for Ebert Composites Corporation. 

Education

B.S., Business, Management, Marketing, and Related Support Services - the University of Colorado-Boulder's Leeds School of Business; attended Griffith University in Queensland, Australia. 

 Todd Johnson

​ThoughtCo and Dotdash

ThoughtCo is a premier reference site focusing on expert-created education content. We are one of the top-10 information sites in the world as rated by comScore, a leading Internet measurement company. Every month, more than 13 million readers seek answers to their questions on ThoughtCo.

For more than 20 years, Dotdash brands have been helping people find answers, solve problems, and get inspired. We are one of the top-20 largest content publishers on the Internet according to comScore, and reach more than 30% of the U.S. population monthly. Our brands collectively have won more than 20 industry awards in the last year alone, and recently Dotdash was named Publisher of the Year by Digiday, a leading industry publication.

https://www.thoughtco.com/what-is-pvc-plastics-820366